Improved mechanical properties of poly(ethylene terephthalate) nanocomposite fibers

Polymer Engineering and Science

Volumn 50, Issue 11, 2010, Pages 2205-2215

  Litchfield, David W ^a   Baird, Donald G ^a   Rim, Peter B ^b   Chen, Chen ^a  

^a Virginia Polytechnic Institute and State University   (United States)

^b Performance Fibers Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ETHYLENE; FIBERS; GLASS TRANSITION; MELT SPINNING; NANOCOMPOSITES; POLYETHYLENE TEREPHTHALATES; SPINNING (FIBERS); SURFACE TREATMENT;

HIGH-STRENGTH FIBERS; INDUCED DEGRADATION; LOW CONCENTRATIONS; MODIFIED MONTMORILLONITE; NANOCOMPOSITE FIBERS; ORGANICALLY MODIFIED MONTMORILLONITE; POLY(ETHYLENE TEREPHTHALATE) FIBRES; POLY(ETHYLENE) TEREPHTHALATE; SOLID STATE POLYMERIZATION; YOUNG MODULUS;

ELASTIC MODULI;

EID: 78249234707     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21758     Document Type: Article

References (49)

1. T.J. Pinnavaia, and, G. Beall, Polymer-Clay Nanocomposites, John Wiley, New York (2000).
2. S.S. Ray, and, M. Okamoto, Prog. Polym. Sci., 28, 1539 (2003).
3. S.C. Tjong, Mater. Sci. Eng. Rev., 53, 73 (2006).
4. S. Pavlikova, R. Thomann, P. Reichert, R. Mulhaupt, A. Marcincin, and, E. Borsig, J. Appl. Polym. Sci., 89, 604 (2003).
5. E. Giza, H. Ito, T. Kikutani, and, N. Okui, J. Macromol. Sci. Phys., B39, 545 (2000).
6. J.H. Chang, Y.U. An, S.J. Kim, and, S. Im, Polymer, 44, 5655 (2003).
7. J.H. Chang, and, S.J. Kim, Poymer Bull, 52, 289 (2004).
8. D.C. McConnell, P.R. Hornsby, C.Y. Lew, and, E. H. Qua, Ann. Tech. Conf. Soc. Plastic Eng., Technical Papers 2006, 387 (2006).
9. J.H. Chang, S.J. Kim, Y.L., Joo, and, S. Im, Polymer, 45, 919 (2004).
10. T.D. Fornes, and, D.R. Paul, Polymer, 44, 4993 (2003).
11. C. Houphouet-Boigny, C.J.G. Plummer, M.D. Wakeman, and, J.-A.E. Manson, Polym. Eng Sci., 47, 1122 (2007).
12. Q.T. Nguyen, and, D.G. Baird, Adv. Polymer Technol, 25, 270 (2006).
13. J.H. Chang, M.K. Mun, and, I.C. Lee, J. Appl. Polym. Sci., 98, 2009 (2005).
14. Y. Imai, S. Nishimura, E. Abe, H. Tateyama, A. Abiko, A. Yamaguchi, T. Aoyama, and, H. Taguchi, Chem. Mater., 14, 477 (2002).
15. C. Saujanya, Y. Imai, and, H. Tateyama, Polymer Bull., 49, 69 (2002).
16. G.-H. Guan, C.-C. Li, and, D. Zhang, J. Appl. Polym. Sci., 95, 1443 (2005).
17. M.-H. Jung, J.-H. Chang, and, J.-C. Kim, Polym. Eng. Sci., 47, 1820 (2007).
18. A. Pegoretti, J. Kolarik, C. Peroni, and, C. Migliaresi, Polymer, 45, 2751 (2004).
19. J.C. Matayabas, S.R. Turner, B.J. Sublett, G.W. Connell, J.W., and, R.B. Barbee, U.S. Patent 6084,019(2000).
20. C.H. Davis, L.J. Mathias, J.W. Gilman, D.A. Schiraldi, J.R. Shields, P. Trulove, T. Sutto, and, H.C. Delong, J. Polym. Sci. B. Polym. Phys., 40, 2661 (2002).
21. A. Sanchez-Solis, I. Romero-Ibarra, M.R. Estrada, F. Calderas, and, O. Manero, Polym. Eng. Sci., 44, 1094 (2004).
22. S. Pendse, A. Ranade, N. D'Souza, and, J.A. Ratto, Ann. Tech. Conf. Soc. Plastic Eng., Technical Papers, 2343 (2004).
23. S. Pendse, N. D'Souza, and, J.A. Ratto, Ann. Tech. Conf. Soc. Plastic Eng., Technical Papers, 3492 (2005).
24. M. Wang, M. Zhu, and, B. Sun, J. Macromol. Sci. A Pure Appl. Chem., 43, 1986 (2006).
25. A. Sanchez-Solis, A. Garcia-Rejon, and, O. Manero, Macromol. Symp., 192, 281 (2003).
26. W.D. Lee, S.S. Im, H.-M. Lim, and, K.-J. Kim, Polymer, 47, 1364 (2006).
27. L.V. Todorov, and, J.C. Viana, J. Appl. Polym. Sci., 106, 1659 (2007).
28. M.T.M. Bizarria, A.L.F.D.M. Giraldi, C.M. de Carvalho, J.I. Velasco, M.A. d'Avila, and, L.H.I. Mei, J. Appl. Polym. Sci., 104, 1839 (2007).
29. B. Gantillon, R. Spitz, and, T.F. McKenna, Macromol. Mater. Eng., 289, 88 (2004).
30. J.P. Jog, Mater. Sci. Technol., 22, 797 (2006).
31. H. Yu, K. Han, and, M. Yu, J. Appl. Polym. Sci., 94, 971 (2004).
32. D.W. Litchfield, and, D.G. Baird, Rheol. Rev., 2006, 1 (2006).
33. F. Bellucci, G. Camino, A. Frache, and, A. Sarra, Polymer Degrad. Stabil., 92, 425 (2007).
34. Y. Ma, U.S. Agarwal, D.J. Sikkema, and, P. J. Lemstra, Polymer, 44, 4085 (2003).
35. J. Brandrup, Polymer Handbook, John Wiley, New York (1999).
36. G.C. Berry, and, T.G. Fox, Adv. Polymer Sci., 5, 261 (1967).
37. D.W. van Krevelen, Properties of Polymers, Elsevier, New York (1990).
38. Q.T. Nguyen, and, D.G. Baird, Polymer, 48, 6923 (2007).
39. C.-Y. Kao, W.-H. Chen, and, B.-Z. Wan, J. Appl. Polym. Sci., 70, 1939 (1998).
40. J. Karger-Koscis, " Reactive Modification/Compatibilization of Polyesters, " in Handbook of Thermoplastic Polyesters, Vol. 2., S. Fakirov, Ed., Wiley-VCH, Weinheim, 819 (2002).
41. Southern-Clay-Products Cloisite 20A: Typical Physical Properties Bulletin (2008).
42. G.W. Brindley, Crystal Structures of Clay Minerals and Their X-ray Indentification, Mineralogical Society, London (1980).
43. X. Qu, T. Guan, G. Liu, Q. She, and, L. Zhang, J. Appl. Polym. Sci., 97, 348 (2005).
44. K. Wang, L. Chen, J. Wu, M.L. Toh, C. He, and, A.F. Yee, Macromolecules, 38, 788 (2005).
45. K. Varnot, E. Reynaud, M.-H. Kloppfer, G. Vigier, and, J. Varlet, J. Polym Sci. B Polym. Phys., 39, 1360 (2001).
46. C. Ibanes, L. David, M. De Boissieu, R. Seguela, T. Epicier, and, G. Robert, J. Polym. Sci. B Polym. Phys., 42, 3876 (2004).
47. D.W. Litchfield,. The Manufacture and Mechanical Properties of PET Fibers Filled with Organically Modified MMT, PhD Dissertation. Virginia Tech, Blacksburg, VA (2008).
48. D.W. Litchfield, and, D.G. Baird, Polymer, 49, 5027 (2008).
49. D.R. Salem, "Draw-Induced Structure Development in Flexible-Chain Polymers," in Structure Formation in Polymeric Fibers, D.R. Salem, Ed., Hanser, Munich, 167 (2001).