Technology roadmap for high frequency integrated DC-DC converter

2009 IEEE 6th International Power Electronics and Motion Control Conference, IPEMC '09

Volumn , Issue , 2009, Pages 1-8

  Li, Qiang ^a   Lim, Michele ^a   Sun, Julu ^a   Ball, Arthur ^a   Ying, Yucheng ^a   Lee, Fred C ^a   Ngo, K D T ^a  

^a State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOARD-LEVEL; CURRENT LEVELS; DEVICE PACKAGING; DEVICE TECHNOLOGIES; FREQUENCY RANGES; HIGH FREQUENCY; HIGH FREQUENCY HF; INTEGRATION TECHNOLOGIES; MAGNETIC INTEGRATION; MAGNETIC INTEGRATION TECHNIQUE; MOS-FET; POINT-OF-LOAD CONVERTERS; RESEARCH LABS; ROADMAP; STATE-OF-THE-ART TECHNOLOGY; TECHNOLOGY ROADMAPS; TOWARD INTEGRATION; TRENCH MOSFET; WAFER LEVEL;

DC POWER TRANSMISSION; INTEGRATION; MAGNETIC DEVICES; MAGNETIC MATERIALS; MAGNETISM; MOTION CONTROL; MOTION PLANNING; POWER ELECTRONICS; TECHNOLOGY;

MOSFET DEVICES;

EID: 78049460037     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IPEMC.2009.5289334     Document Type: Conference Paper

References (41)

1. Magali Brunet, Terence O'Donnell, Laurent Baud, Ningoing Wang, Joe O'Brien, Paul McCloskey, and Sean C. O'Mathuna. "Electrical performance of microtransformers for DC-DC converter applications." IEEE Transactions on Magnetics, vol. 38, no. 5, pp. 3174-3176, Sept. 2002.
2. Srinivasan Iyengar, Trifon M. Liakopoulos and Chong H. Ahn. "A DC/DC boost converter toward fully on-chip integration using new micromachined planar inductors", in proc. Power Electronics Specialists Conference, 1999, pp. 72-76.
3. Yasushi Katayama, Satoshi Sugahara. Haruo Nakazawa. Masaharu Edo, "High-Power-Density MHz-Switcing Monolithic DC-DC Converter with Thin-Film Inductor." , in proc. Power Electronics Specialists Conference. 2000, pp. 1485-1490.
4. Parul Dhagat, Student, Satish Prabhakaran, and Charles R. Sullivan, "Comparison of magnetic materials for V-groove inductors in optimlized high-frequency DC-DC converters." IEEE Transactions on Magnetics, vol. 40, no. 4. pp. 2008-2010, July 2004.
5. T. O'Donnell, N. Wang. M. Brunet, S. Roy. A. Connell. J. Power, C. O'Mathuna, P. McCloskey. "Thin film micro-transformers for future power conversion", Applied Power Electronics Conference and Exposition. 2004. pp. 939-944.
6. Masato Mino, Toshiaki Yachi, Akio Tago, Keiichi Yanagisawa, and Kazuhiko Sakakibara, "A new planar microtransformer for use in micro-switching converters." IEEE Transactions on Magnetics, vol. 28. no. 4. pp. 1969-1973, July 1992.
7. Sullivan, C. R. and S. R. Sanders, "Design of microfabricated transformers and inductors for high-frequency power conversion." IEEE Transactions on Power Electronics, vol. 11, no. 2. pp. 228-238. Mar. 1996.
8. Surya Musunuri, Patrick L. Chapman, Jun Zou, and Chang Liu, "Design issues for monolithic DC-DC converters,." IEEE- Transactions on Power Electronics, vol. 20, no. 3. pp. 639-649. May 2005.
9. Eui Jung Yun, Myunghee Jung, Chae Il Cheon, and Hyoung Gin Nam, "Microfabrication and characteristics of low-power high-performance magnetic thin-film transformers." IEEE Transactions on Magnetics, vol. 40, no. 1, pp. 65-70, Jan. 2004.
10. T. O'Donnell, N. Wang, R. Meere, F. Rhen, S. Roy, D. O'Sullivan. C. O'Mathuna, "Microfabricated inductors for 20 MHz Dc-Dc converters". Applied Power Electronics Conference and Exposition, 2008, pp. 689-693.
11. Ahn. C. H. and M. G. Allen (1996). "A comparison ot two micromachined inductors (bar- and meander-type) for fully integrated boost DC/DC powei converters." Power Electronics, IEEE Transactions on 11(2): 239-245.
12. Toshiro Sato, Hiroshi Tomita, Atsuhito Sawahe, Tetsuo Inoue, Tetsuhiko Mizoguchi, and Masashi Sahashi, "A Magnetic Thin Film Inductor and its Application to a MHz Switching dc-dc Converter", IEEE Transactions on Magnetics, vol. 30, no. 2, pp. 217-223, Mar. 1994.
13. Satish Prabhakaran, Charles R. Sullivan, and Kapil Venkatachalam, "Measured electrical performance of V-groove inductors- for microprocessor power delivery." IEEE Transactions on Magnetics, vol. 39, no. 5, pp. 3190-3192. Sept. 2003.
14. Jian Lu, Hongwei Jia, Andres Arias, Xun Gong and Z, John Shen, "On- Chip Bondwire Transformers for Power SOC Applications", in proc. Applied Power Electronics Conference and Exposition, 2008, pp. 199-204.
15. Mingliang Wang; Batarseh, I.; Ngo, K.D.T.; Huikai Xie, "Design and Fabrication of Integrated Power Inductor Based on Silicon Molding Technology", Power Electronics Specialists Con,.. 2007, pp. 1612-1618.
16. J. M. Lopera. M. J. Prieto, A. M. Pemia M. de Graaf, W. Waanders L. Alvarez, "Design of integrated magnetic elements using thick-film technology", in proc. Applied Power Electronics Conference and Exposition, 1998, pp. 407-413.
17. Robert Hahn, Steffen Krumbholz, Herbert Reichl, "Low profile power inductors based on ferromagnetic LTCC technology", in proc. Electronic Components and Technology Conference, 2006, pp. 528-533.
18. Tsutomu Mikura, Koichi Nakahara, Kota Ikeda, Ken Furukuwa, and Katsuhiko Onitsuka, "New substrate for micro DC-DC converter", Electronic Components and Technology Conference, 2006, pp. 1326-1330.
19. Miguel J. Prieto, Alberto M. Pernia, Juan M. Lopera, Juan Martin, Fernando Nuiio, "Thick-film integrated inductors for power converters", in proc. Industry Applications Conference, 2000. pp. 3111-3118.
20. Michele H. Lim, Jacobus, D. van Wyk, F. C. Lee, and Khai D. T. Ngo, "A Class of Ceramic-Based Chip Inductors for Hybrid Integration in Power Supplies", IEEE Transactions on Power Electronics, vol. 23, no. 3, pp. 1556-1564, May 2008.
21. I. Kowase. T. Sato. K. Yamasawa, Y. Miura, "A planar inductor using Mn-Zn ferrite/polyimide composite thick film for low-Voltage and large-current DC-DC converter", IEEE Transactions on Magnetics, vol 41, no. 10. pp. 3991-3993, Oct. 2005.
22. A. M. Pernia, M. J. Prieto, J. M. Lopera, J. Reilly, S. S. Linton, C. Quinones. "Thick-film hybrid technology for low output voltage DC/DC converter", in proc. Industry Applications Conf., 2002, pp. 1315-1322.
23. Moon, K.W.; Hong, S.H.; Kim, H.J.; Kim, J.:, "A fabrication of DC-DC converter using LTCC NiZnCu ferrite thick films", in proc. Int. Magnetics Conf., 2005, pp. 1109-1110.
24. Eberhard Waffenschmidt. Bernd Ackermann, and J. A. Ferreira," Design method and material technologies for passives in printed circuit Board Embedded circuits", IEEE Transactions on Power Electronics, vol. 20, no. 3, pp. 576-584, May 2005.
25. Matthias Ludwig, Maeve Duffy, Terence O'Donnell, Paul McCloskey, and Seán Cian Ó Mathùna, "PCB integrated inductors for low power DC/DC converter". IEEE Transactions on Power Electronics, vol. 18, no. 4, pp. 937-945. July 2003.
26. Isao, Kowase. Toshiro Sato, Kiyohito Yamasawa, Member, IEEE, and Yoshimasa Miura, "A planar inductor using Mn-Zn ferrite/polyimide composite thick film for low-Voltage and large-current DC-DC converter." IEEE Transactions on Magnetics, vol 41, no. 10. pp. 3991-3993, Oct. 2005.
27. Jae Y. Park, Mark G. Allen "Low Temperature Fabrication and Characterization of Integrated Packaging-Compatible, Ferrite-Core Magnetic Devices" APEC 1997, pp. 361-367.
28. Zhang, Y. E. and S. R. Sanders, "In-board magnetics processes", in proc. Power Electronics Specialists Conference, 1999, pp. 561-567.
29. Tang, S. C., S. Y. R. Hui, and Henry Shu-Hung Chung, "A low-profile power converter using printed-circuit board (PCB) power transformer with ferrite polymer composite." IEEE Transactions on Power Electronics. vol. 16. no. 4, pp. 493-498, July 2001.
30. Brett A. Miwa, Leo F. Casey, and Martin F. Schlecht, "Copper-based hybrid fabrication of a 50 W, 5 MHz 40 V-5 V DC/DC converter." IEEE 'Transactions on Power Electronics. vol. 6. no. 1, pp. 2-10, Jan. 1991.
31. J. A. Cobos, M. Rascon, L. Alvarez, S. Ollero, M. de Graf and W. Waanders, "Low profile and low Output voltage DC/DC converters for on-board power distribution using planar magnetics", in proc. Industry Applications Conference, 1997, pp. 1153-1158.
32. Rengang. C., J. D. van Wyk, Shuo Wang, and Willem Gerhardus Odendaal, "Improving the Characteristics of integrated EMI filters by embedded conductive Layers." IEEE Transactions on Power Electronics, vol. 20, no. 3. pp. 611-619, May 2005.
33. A.B. Lostetter, F. Barlow, A. Elshabini, K. Olejniczak, and S. Ang, "Polymer thick film (PTF) and flex technologies for low cost power electronics packaging". International Workshop on Integrated Power Packaging. IWIPP 2000, pp. 33-40.
34. T. Fujiwara, "Planar integrated magnetic component with transformer and inductor using multilayer printed wiring board". IEEE Transactions on Magnetics, vol. 34, no. 4, pp. 2051-2053, July 1998.
35. Meinhardt, M., T. O'Donnell, Henning Schneider, John Flannery, Cian O'Mathuna, Peter Zacharias, and Thomas Krieger, "Miniaturised "Low Profile" module integrated converter for photovoltaic applications with integrated magnetic components". in proc. Applied Power Electronics Conference, 1999, pp. 305-311.
36. Lopera J. M. Lopera, Miguel J. Prieto, Alberto M. Pernìa. Fernando Nuño. Martinus J. M. de Graaf, Jan Willem Waanders, and Lourdes Alvarez Barcia, "Design of integrated magnetic elements using thickfilm technology." IEEE Transactions on Power Electronics, vol. 14, no. 3, pp. 408-414, May 1999.
37. D. C. Hopkins, "Thick-film power hybridization of switchmode power circuits", in proc. Applied Power Electronics Conference, 1989, pp. 249-255.
38. Ball, Arthur; Lim, Michele: Gilliam, David; Lee, Fred C., "System design of a 3D integrated non-isolated Point Of Load converter.". Applied Power Electronics Conference and Exposition, 2008. APEC 2008. Twenty-Third Annual IEEE, vol., no., pp.181-186, 24-28 Feb. 2008
39. S. Kelly, C. Collins, M. Duffy, F. M. F. Rhen, S. Roy, "Core Materials for High Frequency VRM Inductors". PESC,2007, pp. 1767-1772.
40. Preston Galle, Xiaosong Wu. Luke Milner. Seong-Hyok Kim, Peter Johnson, Peter Smeys, Peter Hopper, Kyuwoon Hwang, and Mark G. Allen, "Ultra-Compact Power Conversion Based on a CMOS-Compatible Microfabricated Power Inductor With Minimized Core Losses" ECTC, 2007.
41. Eberhard Waffenschimidt, Bernd Ackcnnann. J. A. Ferreira, "Design Method and Material Technologies for Passives in Printed Circuit Board Embedded Circuits, IEEE Transactions, vol. 20. no. 3, May 2005, pp. 576-584.