Specific heat capacity and thermal diffusivity and their temperature dependencies in a rock sample from adjacent to the Taiwan Chelungpu fault

Journal of Geophysical Research: Solid Earth

Volumn 115, Issue 5, 2010, Pages

  Hirono, Tetsuro ^a   Hamada, Yohei ^a  

^a OSAKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CHI-CHI EARTHQUAKE 1999; COSEISMIC PROCESS; FAULT ZONE; FRICTION; HEAT CAPACITY; HEATING; NUMERICAL METHOD; PHASE TRANSITION; ROCK PROPERTY; SHEAR STRESS; TEMPERATURE;

CHELUNGPU FAULT ZONE; TAIWAN;

EID: 78049297571     PISSN: 21699313     EISSN: 21699356     Source Type: Journal    
DOI: 10.1029/2009JB006816     Document Type: Article

References (51)

1. Andrews, D. J. (2002), A fault constitutive relation accounting for thermal pressurization of pore fluid, J. Geophys. Res., 107(B12), 2363, doi:10.1029/2002JB001942.
2. Berman, R. (1976), Thermal Conductivity in Solids, 193 pp., Clarendon Univ. Press, Oxford.
3. Branlund, J. B., and A. M. Hofmeister (2007), Thermal diffusivity of quartz to 1,000°C: Effect of impurities and the a-b phase transition, Phys. Chem. Miner., 34, 581-595, doi:10.1007/s00269-007-0173-7. (Pubitemid 47500388)
4. Bray, H. J., and S. A. T. Redfern (1999), Kinetics of dehydration of Ca-montmorillonite, Phys. Chem. Miner., 26, 591-600, doi:10.1007/ s002690050223. (Pubitemid 30003502)
5. Cermak, V., and L. Rybach (1982), Thermal conductivity and specific heat of minerals and rocks, in Landolt-Bornstein; Zahlenwerte und Funktionen aus Naturwissenschaften und Technik, edited by G. Angenheister, pp. 305-343 (Hrsg.) Bd. 1, Physikalische Eigenschaften der Gesteine, Teilbd. a., Springer, Berlin, Heidelberg, New York.
6. Chester, J. S., F. M. Chester, and A. K. Kronenberg (2005), Fracture surface energy of the Punchbowl fault, San Andreas system, Nature, 437, 133-136, doi:10.1038/nature03942. (Pubitemid 41613439)
7. Güler, C., and N. Sarier (1990), Kinetics of the thermal dehydration of acid-activated montmorillonite by the rising temperature technique, Thermochim. Acta, 159, 29-33, doi:10.1016/0040-6031(90)80090-L.
8. Hadgu, T., C. C. Lum, and J. E. Bean (2007), Determination of heat capacity of Yucca Mountain stratigraphic layers, Int. J. Rock Mech. Min. Sci., 44, 1022-1034, doi:10.1016/j.ijrmms.2007.02.006. (Pubitemid 47079926)
9. Hamada, Y., T. Hirono, M. Ikehara, W. Soh, and S. R. Song (2009a), Estimated dynamic shear stress and frictional heat during the 1999 Taiwan Chi-Chi earthquake: A chemical kinetics approach with isothermal heating experiments, Tectonophysics, 469, 73-84, doi:10.1016/j.tecto. 2009.01.036.
10. Hamada, Y., T. Hirono, W. Tanikawa, W. Soh, and S. R. Song (2009b), Energy taken up by co-seismic chemical reactions during a large earthquake: An example from the 1999 Taiwan Chi-Chi earthquake, Geophys. Res. Lett., 36, L06301, doi:10.1029/2008GL036772.
11. Hemingway, B. S. (1987), Quartz: Heat capacities from 340 to 1000 K and revised values for the thermodynamic properties, Am. Mineral., 72, 273-279.
12. Hirono, T., et al. (2006), High magnetic susceptibility of fault gouge within Taiwan Chelungpu fault: Nondestructive continuous measurements of physical and chemical properties in fault rocks recovered from Hole B, TCDP, Geophys. Res. Lett., 33, L15303, doi:10.1029/2006GL026133. (Pubitemid 44945775)
13. Hirono, T., et al. (2007a), Nondestructive continuous physical property measurements of core samples recovered from Hole B, Taiwan Chelungpu- Fault Drilling Project, J. Geophys. Res., 112, B07404, doi:10.1029/ 2006JB004738.
14. Hirono, T, T. Yokoyama, Y. Hamada, W. Tanikawa, T. Mishima, M. Ikehara, V. Famin, M. Tanimizu, W. Lin, W. Soh, and S. Song (2007b), A chemical kinetic approach to estimate dynamic shear stress during the 1999 Taiwan Chi-Chi earthquake, Geophys. Res. Lett., 34, L19308, doi:10.1029/2007GL030743 (Correction, Geophys. Res. Lett., 35, doi:10.1029/2007GL032512, 2008). (Pubitemid 350263009)
15. Hirono, T., et al. (2008), Clay mineral reactions caused by frictional heating during an earthquake: An example from the Taiwan Chelungpu fault, Geophys. Res. Lett., 35, L16303, doi:10.1029/2008GL034476.
16. Hirose, T., and T. Shimamoto (2005), Growth of molten zone as a mechanism of slip weakening of simulated faults in gabbro during frictional melting, J. Geophys. Res., 110, B05202, doi:10.1029/2004JB003207. (Pubitemid 41052341)
17. Höfer, M., and F. R. Schilling (2002), Heat transfer in quartz, orthoclase, and sanidine at elevated temperature, Phys. Chem. Miner., 29, 571-584, doi:10.1007/s00269-002-0277-z. (Pubitemid 35307802)
18. Ikehara, M., et al. (2007), Low total and inorganic carbon contents within the Chelungpu fault, Geochem. J., 41, 391-396.
19. Ishikawa, T., et al. (2008), Coseismic fluid-rock interactions at high temperatures in the Chelungpu fault, Nat. Geosci., 1, 679-683, doi:10.1038/ ngeo308.
20. Japan Society of Mechanical Engineers (1983), JSME Data Book: Thermophysical Properties of Fluids, Maruzen, Tokyo.
21. Kanamori, H., and L. Rivera (2006), Energy partitioning during an earthquake, in Earthquake: Radiated Energy and the Physics of Faulting, edited by R. Abercrombie, A. McGarr, H. Kanamori, and G. Di Toro, pp. 3-13, AGU, Washington, D. C.
22. Kano, Y., J. Mori, R. Fujio, H. Ito, T. Yanagidani, S. Nakao, and K. Ma (2006), Heat signature on the Chelungpu fault associated with the 1999 Chi-Chi, Taiwan earthquake, Geophys. Res. Lett., 33, L14306, doi:10.1029/2006GL026733. (Pubitemid 44945849)
23. L'vov, B. V., and V. L. Ugolkov (2005), Kinetics and mechanism of dehydration of kaolinite, muscovite and talc analyzed thermogravimetrically by the third-law method, J. Therm. Anal. Calorim., 82, 15-22, doi:10.1007/s10973- 005-0886-0. (Pubitemid 43073889)
24. L'vov, B. V., L. K. Polzik, and V. L. Ugolkov (2002), Decomposition kinetics of calcite: A new approach to the old problem, Thermochim. Acta, 390, 5-19, doi:10.1016/S0040-6031(02)00080-1.
25. Lachenbruch, A. H. (1980), Frictional heating, fluid pressure, and the resistance to fault motion, J. Geophys. Res., 85(B11), 6097-6122, doi:10.1029/ JB085iB11p06097.
26. Lin, W., E.-C. Yeh, H. Ito, J.-H. Hung, T. Hirono, W. Soh, K.-F. Ma, M. Kinoshita, C.-Y. Wang, and S.-R. Song (2007), Current stress state and principal stress rotations in the vicinity of the Chelungpu fault induced by the 1999 Chi-Chi, Taiwan, earthquake, Geophys. Res. Lett., 34, L16307, doi:10.1029/2007GL030515. (Pubitemid 350065317)
27. Ma, K.-F., C.-T. Lee, Y.-B. Tsai, T.-C. Shin, and J. Mori (1999), The Chi- Chi, Taiwan earthquake: Large surface displacements on inland thrust fault, Eos Trans. AGU, 80, 605-611, doi:10.1029/99EO00405.
28. Ma, K.-F., et al. (2006), Slip zone and energetics of a large earthquake from the Taiwan Chelungpu-fault Drilling Project, Nature, 444, 473-476, doi:10.1038/nature05253. (Pubitemid 44809062)
29. Mazzucato, E., G. Artioli, and A. Gualtieri (1999), High temperature dehydroxylation of muscovite-2M1: A kinetic study by in situ XRPD, Phys. Chem. Miner., 26, 375-381, doi:10.1007/s002690050197. (Pubitemid 29429245)
30. Mishima, T., T. Hirono, N. Nakamura, W. Tanikawa, W. Soh, and S. Song (2009), Changes to magnetic minerals caused by frictional heating during the 1999 Taiwan Chi-Chi earthquake, Earth Planets Space, 61, 797-801.
31. Noyan, H., M. Önal, and Y. Sarikaya (2008), Thermal deformation thermodynamics of a smectite mineral, J. Therm. Anal. Calorim., 91, 299-303, doi:10.1007/s10973-007-8260-z. (Pubitemid 351217020)
32. Parker, W. J., R. J. Jenkins, C. P. Butler, and G. L. Abbott (1961), Flash method for determining thermal diffusivity, heat capacity and thermal conductivity, J. Appl. Phys., 32, 1679-1684, doi:10.1063/1.1728417.
33. Pittarello, L., G. Di Toro, A. Bizzari, G. Pennacchioni, J. Hadizadeh, and M. Cocco (2008), Energy partitioning during seismic slip in pseudotachylyte- bearing faults (Gole Larghe Fault, Adamello, Italy), Earth Planet. Sci. Lett., 269, 131-139, doi:10.1016/j.epsl.2008.01.052.
34. Saikia, N., P. Sengupta, P. K. Gogoi, and P. C. Borthakur (2002), Kinetics of dehydroxylation of kaolin in presence of oil field effluent treatment plant sludge, Appl. Clay Sci., 22, 93-102, doi:10.1016/S0169-1317(02) 00130-8.
35. Scholz, C. H. (2002), The Mechanisms of Earthquake Faulting, 496 pp., Cambridge Univ. Press, New York.
36. Schon, J. H. (1996), Physical Properties of Rocks: Fundamentals and Principles of Petrophysics, 583 pp., Pergamon, New York.
37. Sibson, R. H. (1973), Interaction between temperature and pore-fluid pressure during earthquake faulting-A mechanism for partial or total stress relief, Nature, 243, 66-68.
38. Skauge, A., N. Fuller, and L. G. Hepler (1983), Specific heats of clay minerals: Sodium and calcium kaolinites, sodium and calcium montmorillonites, illite, and attapulgite, Thermochim. Acta, 61, 139-145, doi:10.1016/0040- 6031(83)80310-4.
39. Sone, H., E. Yeh, T. Nakaya, J.-H. Hung, K.-F. Ma, C.-Y. Wang, S.-R. Song, and T. Shimamoto (2007), Mesoscopic structural observations of cores from the Chelungpu fault system, Taiwan-Chelungpu-fault Drilling Project Hole-A, Taiwan, Terr. Atmospher. Ocean. Sci., 18, 359-377, doi:10.3319/TAO.2007.18.2. 359(TCDP). (Pubitemid 47190396)
40. Song, S.-R., L.-W. Kuo, E.-C. Yeh, C.-Y. Wang, J.-H. Hung, and K.-F. Ma (2007), Characteristics of the lithology, fault-related rocks and fault zone structures in TCDP Hole-A, Terr. Atmos. Ocean. Sci., 18, 243-269, doi:10.3319/TAO.2007.18.2.243(TCDP). (Pubitemid 47190392)
41. Spray, J. G. (2005), Evidence for melt lubrication during large earthquakes, Geophys. Res. Lett., 32, L07301, doi:10.1029/2004GL022293. (Pubitemid 40958979)
42. Sulem, J., and V. Famin (2009), Thermal decomposition of carbonates in fault zones: Slip-weakening and temperature limiting effects, J. Geophys. Res., 114, B03309, doi:10.1029/2008JB006004.
43. Tanaka, H., W. M. Chen, K. Kawabata, and N. Urata (2007), Thermal properties across the Chelungpu fault zone and evaluations of positive thermal anomaly on the slip zones: Are these residuals of heat from faulting? Geophys. Res. Lett., 34, L01309, doi:10.1029/2006GL028153. (Pubitemid 47277725)
44. Tanikawa, W., and T. Shimamoto (2009), Frictional and transport properties of the Chelungpu fault from shallow borehole data and their correlation with seismic behavior during the 1999 Chi-Chi earthquake, J. Geophys. Res., 114, B01402, doi:10.1029/2008JB005750.
45. Tanikawa, W., T. Mishima, T. Hirono, W. Lin, T. Shimamoto, W. Soh, and S. Song (2007), High magnetic susceptibility produced in high-velocity frictional tests on core samples from the Chelungpu fault in Taiwan, Geophys. Res. Lett., 34, L15304, doi:10.1029/2007GL030783. (Pubitemid 47521274)
46. Tanikawa, W., M. Sakaguchi, T. Hirono, W. Lin, W. Soh, and S. Song (2009), Transport properties and dynamic processes in a fault zone from samples recovered from TCDP Hole B of the Taiwan Chelungpu Fault Drilling Project, Geochem. Geophys. Geosyst., 10, Q04013, doi:10.1029/2008GC002269.
47. Tinti, E., P. Spudich, and M. Cocco (2005), Earthquake fracture energy inferred from kinematic rupture models on extended faults, J. Geophys. Res., 110, B12303, doi:10.1029/2005JB003644. (Pubitemid 43159830)
48. Venkantaraman, A., and H. Kanamori (2004), Effect of directivity on estimates of radiated seismic energy, J. Geophys. Res., 109, B04301, doi:10.1029/2003JB002548. (Pubitemid 38978550)
49. Waples, D. W., and J. S. Waples (2004), A review and evaluation of specific heat capacities of rocks, minerals, and subsurface fluids. Part 1: Minerals and nonporous rocks, Nat. Resour. Res., 13, 97-122, doi:10.1023/B:NARR.0000032647.41046.e7. (Pubitemid 38790089)
50. Wu, H.-Y., K.-F. Ma, M. Zoback, N. Boness, H. Ito, J.-H. Hung, and S. Hickman (2007), Stress orientations of Taiwan Chelungpu-Fault Drilling Project (TCDP) hole-A as observed from geophysical logs, Geophys. Res. Lett., 34, L01303, doi:10.1029/2006GL028050. (Pubitemid 47277719)
51. Yeh, E., et al. (2007), Core description and characteristics of fault zones from Hole-A of the Taiwan Chelungpu-Fault Drilling Project, Terr. Atmospher. Ocean. Sci., 18, 327-357, doi:10.3319/TAO.2007.18.2.327(TCDP). (Pubitemid 47190395)