A simple 2-D finite-element geometry for analyzing surface-mounted synchronous machines with skewed rotor magnets

IEEE Transactions on Magnetics

Volumn 46, Issue 11, 2010, Pages 3948-3954

  Urresty, Julio Csar ^a   Riba, Jordi Roger ^a   Romeral, Lus ^a   Garcia, Antonio ^a  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

Author keywords

Finite element analysis; permanent magnets; permanent magnet synchronous machines; simulation; skew

Indexed keywords

COMPUTATIONAL BURDEN; FEM ANALYSIS; FINITE ELEMENT ANALYSIS; FINITE-ELEMENT; HIGH SPEED; MULTI SLICES; PERMANENT MAGNET SYNCHRONOUS MACHINES; SIMULATION; SKEW; SKEWED DISTRIBUTION; SKEWED ROTORS; SYNCHRONOUS MACHINE;

GEOMETRY; MAGNETIC DEVICES; PERMANENT MAGNETS; TWO DIMENSIONAL;

FINITE ELEMENT METHOD;

EID: 77958498903     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2010.2062529     Document Type: Article

References (22)

1. C. Gupta, S. Marwaha, and M. S. Manna, "Finite element method as an aid to machine design: A computational tool," in Proc. COMSOL Conf., 2009, pp. 1-6.
2. J. R. Riba, J. A. Rosero, A. Garcia, and L. Romeral, "Detection of demagnetization faults in permanent-magnet synchronous motors under nonstationary conditions," IEEE Trans. Magn., vol.45, no.7, pp. 2961-2969, Jul. 2009.
3. L. Romeral, J. C. Urresty, J. R. Riba, and A. Garcia, "Modeling of surface-mounted permanent magnet synchronous motors with stator winding inter-turn faults," IEEE Trans. Ind. Electron., to be published.
4. J. R. Riba, A. Garcia, and L. Romeral, "Demagnetization diagnosis in permanent magnet synchronous motors under non-stationary speed conditions," Elect. Power Syst. Res., vol.80, no.10, pp. 1277-1285, Oct. 2010.
5. R. Islam, I. Husain, A. Fardoun, and K. McLaughlin, "Permanentmagnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction," IEEE Trans. Ind. Appl., vol.45, no.1, pp. 152-160, 2009.
6. Y. Dai, L. Song, and S. Cui, "Development of PMSM drives for hybrid electric car applications," IEEE Trans. Magn., vol.43, no.1, pp. 434-437, Jan. 2007.
7. J. Roger-Folch, V. J. Ĺ zaro-Joares, and E. Gómez; Lálzaro, "Analysis of skewed slots in induction machines by using 2D finite element method," COMPEL, vol. 17, no. 1/2/3, pp. 212-218, 1998.
8. A. M. Knight, S. Troitskaia, N. Stranges, and A. Merkhouf, "Analysis of large synchronous machines with axial skew, part1: Flux density and open-circuit voltage harmonics," IET Electr. Power Appl., vol.3, no.5, pp. 389-397, 2009.
9. I. S. Jung, J. Hur, and D. S. Hyun, "3-D analysis of permanent magnet linear synchronous motor with magnet arrangement using equivalent magnetic circuit network method," IEEE Trans. Magn., vol.35, no.5, pp. 3736-3738, Sep. 1999.
10. S. M. Jang, S. H. Lee, and I. K. Yoon, "Design criteria for detent force reduction of permanent-magnet linear synchronous motors with Halbach array," IEEE Trans. Magn., vol.38, no.5, pp. 3261-3263, Sep. 2002.
11. G. H. Lee, S. I. Kim, J. P. Hong, and J. H. Bahn, "Torque ripple reduction of interior permanent magnet synchronous motor using harmonic injected current," IEEE Trans. Magn., vol.44, no.6, pp. 1582-1585, Jun. 2008.
12. Y. Kawase, T. Yamaguchi, Z. Tu, N. Toida, N. Minoshima, and K. Hashimoto, "Effects of skew angle of rotor in squirrel-cage induction motor on torque and loss characteristics," IEEE Trans. Magn., vol.45, no.3, pp. 1700-1703, Mar. 2009.
13. G. Dajaku and D. Gerling, "Skewing effect on thePM flux-linkage high harmonics of the PM machines with delta winding," in Proc. 13th Eur. Conf. Power Electronics and Applications (EPE'09), 2009, pp. 1-7.
14. E. Schmidt and A. Eilenberger, "Calculation of position-dependent inductances of a permanent magnet synchronous machine with an external rotor by using voltage-driven finite element analyses," IEEE Trans. Magn., vol.45, no.3, pp. 1788-1791, Mar. 2009.
15. P. J. Holik, D. G. Dorrell, P. Lombard, H. J. Thougaard, and F. Jensen, "A multi-sliced finite element model for induction machines incorporating inter-bar current," in Proc. IEEE Industry Applications Conf., 41st IAS Annu. Meeting, Conf. Rec., 2006, pp. 819-826.
16. R. Carlson, C. A. da Silva, N. Sadowski, Y. Lefèvre, and M. Lajoie- Mazenc, "The effect of the stator-slot opening on the interbar currents of skewed cage induction motor," IEEE Trans. Magn., vol.38, no.2, pp. 1285-1288, Mar. 2002.
17. G. D. Kalokiris, T. D. Kefalas, A. G. Kladas, and J. A. Tegopoulos, "Special air-gap element for 2-D FEM analysis of electrical machines accounting for rotor skew," IEEE Trans. Magn., vol.41, no.5, pp. 2020-2023, May 2005.
18. D. G. Dorrell, P. J. Holik, and C. B. Rasmussen, "Analysis and effects of inter-bar current and skew on a long skewed-rotor induction motor for pump applications," IEEE Trans. Magn., vol.43, no.6, pp. 2534-2536, Jun. 2007.
19. B. M. Ebrahimi, J. Faiz, M. Javan-Roshtkhari, and A. Zargham Nejhad, "Static eccentricity fault diagnosis in permanent magnet synchronous motor using time stepping finite element method," IEEE Trans. Magn., vol.44, no.11, pp. 4297-4300, Nov. 2008.
20. L. Parsa and H. Lei, "Interior permanent magnet motors with reduced torque pulsation," IEEE Trans. Ind. Electron., vol.55, no.2, pp. 602-609, 2008.
21. G. J. Wakileh, "Harmonics in rotating machines," Elect. Power Syst. Res., vol.66, no.1, pp. 31-37, Jul. 2003.
22. F. Magnussen and C. Sadarangani, "Winding Factors and joule losses of permanent magnet machines with concentrated windings," in Proc. IEEE Int. Electric Machines and Drives Conf. (IEMDC'03), 2003, pp. 333-339.