Modeling and performance characterization of UHF RFID portal applications

IEEE Transactions on Microwave Theory and Techniques

Volumn 57, Issue 1, 2009, Pages 1700-1706

  Muehlmann, Ulrich ^a   Manzi, Giuliano ^a   Wiednig, Gerald ^a   Buchmann, Michael ^a  

^a NXP SEMICONDUCTORS   (Netherlands)

Author keywords

Channel modeling; Field strength recording; Supply chain management; UHF RF identification (RFID)

Indexed keywords

CHANNEL MODEL; CHANNEL MODELING; FIELD STRENGTH DISTRIBUTION; FIELD STRENGTHS; INDENTIFICATION; MODEL FIT; MODEL PARAMETERS; PERFORMANCE CHARACTERIZATION; RF IDENTIFICATIONS; SYSTEM INSTALLATION; SYSTEMS INTEGRATION; UHF RFID;

ANTENNAS; CHARACTERIZATION; DISTRIBUTION FUNCTIONS; IDENTIFICATION (CONTROL SYSTEMS); INSTALLATION; MEASUREMENTS; SUPPLY CHAINS;

SUPPLY CHAIN MANAGEMENT;

EID: 77958093581     PISSN: 00189480     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Conference Paper

References (38)

1. R. Glidden and J. Schroeter, "Bringing long-range UHF RFID tags into mainstream supply-chain applications," RFDESIGN, RF, Microw. Technol. Design Eng. 2005. [Online]. Available: www.rfdesign.com
2. R. Glidden et al., "Design of ultra-low-cost UHF RFID tags for supply chain applications," IEEE Commun. Mag., vol. 42, pp. 140-151, 2004.
3. EPC Radio-Frequency Identity Protocols, Class-1 generation-2 UHF RFID protocol for communications at 860 MHz-960 MHz, EPCglobal Inc., 2004, ver. 1.0.9.
4. H. Vogt, "Multiple object identification with passive RFID tags," in IEEE Int. Syst., Man, Cybern. Conf., Oct. 2002, vol. 3, pp. 6-9.
5. K. Finkenzeller, RFID Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification, 2nd ed. New York: Wiley, 1999.
6. G. De Vita and G. Iannaccone, "Design criteria for the RF section of UHF and microwave passive RFID transponders," IEEE Trans. Microw. Theory Tech., vol. 53, no. 9, pp. 2978-2990, Sep. 2005. (Pubitemid 41633222)
7. U. Karthaus and M. Fischer, "Fully integrated passive UHF RFID transponder IC with 16.7 W minimum RF input power," IEEE J. Solid-State Circuits, vol. 38, no. 10, pp. 1602-1608, Oct. 2003.
8. S. R. Saunders, Antennas and Propagation for Wireless Communication Systems. New York: Wiley, 1999.
9. U. Muehlmann and H. Witschnig, "Hard to read tags: An applicationspecific experimental study in passive UHF RFID systems," in Elektrotechnik und informationstechnik. Vienna, Austria: Springer, 2007, vol. 11, pp. 391-396.
10. J. Mitsugi and H. Hada, "Experimental study on UHF passive RFID readability degradation," in SAINT Workshops, 2006, pp. 52-55.
11. J. Mitsugi and O. Tokumasu, "A practical method for UHF RFID interrogation area measurement using battery assisted passive tag," IEICE Trans. Commun., vol. E91-B, no. 4, pp. 1047-1054.
12. J. Mitsugi and Y. Shibao, "Multipath identification using steepest gradient method for dynamic inventory in UHF RFID," presented at the Int. Appl. Symp./Internet SAINTS Workshops, 2007.
13. R. Redemske and R. Fletcher, "The design of UHF tag emulators with applications to RFID testing and data transport," in Proc. 4th IEEE Automat. Identification Technol. Conf., Oct. 2005, pp. 145-150.
14. Information Technology-Radio Frequency Identification for Item Management-Part 6: Parameters for Air Interface Communications at 860 MHz to 960 MHz, ISO 18000-6C standard-RFID UHF air interface, ISO Standards, 2007.
15. RFID Field Recorder. ver. 1.0, CISC, Klagenfurt, Austria, 2008. [Online]. Available: www.cisc.at
16. T. S. Rappaport and C. D. McGillem, "UHF fading in factories," IEEE J. Sel. Areas Commun., vol. 7, no. 1, pp. 40-48, Jan. 1989.
17. H. Nikookar and H. Hashemi, "Statistical modeling of signal amplitude fading of indoor radio propagation channels," in Proc. Int. Universal Pers. Commun. Conf., 1993, vol. 1, pp. 84-88.
18. D. Kim, M. A. Ingram, and W. W. Smith, Jr., "Measurements of smallscale fading and path loss for long-range RF tags," IEEE Trans. Antennas Propag., vol. 51, no. 8, pp. 1740-1749, Aug. 2003.
19. L. W. Mayer, M. Wrulich, and S. Caban, "Measurements and channel modeling for short range indoor UHF applications," in Proc. Eur. Antennas Propag. Conf., Nice, France, Nov. 6-10, 2006, pp. 1-5.
20. T. S. Rappaport, Wireless Communications-Principles and Practice, 2nd ed. Englewood Cliffs, NJ: Prentice-Hall, 2002.
21. K. S. Leong, M. L. Ng, and P. H. Cole, "Positioning analysis of multiple antennas in a dense RFID reader environment," in Int. Symp. Appl./ Internet SAINTS Workshop, Jan. 23-27, 2006, pp. 56-59.
22. K. Sato, T. Manabe, J. Polivka, T. Ihara, Y. Kasashima, and K. Yamaki, "Measurement of the complex refractive index of concrete at 57.5 GHz," IEEE Trans. Antennas Propag., vol. 44, no. 1, pp. 35-40, Jan. 1996.
23. A. Kajiwara, "Circular polarization diversity with passive reflectors in indoor radio channel," IEEE Trans. Veh. Technol., vol. 49, no. 3, pp. 778-782, May 2000.
24. R. A. Ross, "Radar cross section of rectangular flat plates as a function of aspect angle," IEEE Trans. Antennas Propag., vol. AP-14, no. 3, pp. 329-335, Jul. 1966.
25. Y. Han, Q. Li, and H. Min, "System modeling and simulation of RFID," presented at the Auto-ID Labs. Res. Workshop, Zurich, Switzerland, 2004.
26. A. J. Fenn and J. E. Lutz, "Bistatic radar cross section for a perfectly conducting rhombus-shaped flat plate: Simulations and measurements," IEEE Trans. Antennas Propag., vol. 41, no. 1, pp. 47-51, Jan. 1993.
27. Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Radio Equipment to be Used in the 25 MHz to 1000 MHz Frequency RangeWith Power Levels Ranging Up to 500 mW, EN 300 220, Eur. Telecommun. Standards Inst. (ETSI), 2008.
28. Electromagnetic Compatibility and Radio Spectrum Matters (ERM)-Radio-Frequency Identification Equipment Operating in the Band 865 MHz to 868 MHz With Power Levels Up to 2 W, Part 1-Technical Characteristics and Test Methods, EN 302 208, Eur. Telecommun. Standards Inst. (ETSI), 2008.
29. Electromagnetic Compatibility and Radio Spectrum Matters (ERM)-Radio-Frequency Identification Equipment Operating in the Band 865 MHz to 868 MHz With Power Levels Up to 2 W, Part 2-Harmonized EN Under Article 3.2 of the R&TTE Directive, EN 302 208, Eur. Telecommun. Standards Inst. (ETSI), 2008.
30. Infocom-Development Authority of Singapore (IDA), IDA TS SRD Technical Specification for Short Range Devices, Jan. 2008, no. 1, rev 3.
31. "Radio frequency devices intentional radiators, radiated emission limits, general requirements," Fed. Commun. Commission (FCC), Washington, DC, 2003, part 15, subpart C, § 15.245, 15.246, 15.247.
32. 800/900 MHz Radio Frequency Identification (RFID), State Radio Regulation Committee (SRRC), Ministry of Informatics Industry (MII), China, 2007.
33. S. R. Aroor and D. D. Deavours, "Evaluation of the state of passive UHF RFID: An experimental approach," IEEE Syst. J., vol. 1, no. 2, pp. 168-176, Dec. 2007.
34. K. Ramakrishnan and D. Deavours, "Performance benchmarks for passive UHF RFID tags," in Proc. 13th GI/ITG Meas., Modeling, Evaluation Comput. Commun. Sys. Conf. , 2006, pp. 137-154.
35. H. Hashemi, "The indoor radio propagation channel," Proc. IEEE, vol. 81, no. 7, pp. 943-968, Jul. 1993.
36. C. Jin, S. H. Cho, and K. Y. Jeon, "Performance evaluation of RFID EPC Gen2 anti-collision algorithm in AWGN environment," in Int. Mechatron. Automat. Conf., Aug. 5-8, 2007, pp. 2066-2070.
37. C. Floerkemeier and M. Wille, "Comparison of transmission schemes for framed ALOHA based RFID protocols," in Int. Appl. Symp./Internet SAINTS Workshop, Jan. 23-27, 2006, pp. 92-97.
38. NXP Semiconduct., Gratkorn, Austria, "Improving radio frequency identification systems," RFID Ref. Design Center, Nr 9397 750 16489, Mar. 2008.