Influence of fiber-like nanofillers on the rheological, mechanical, thermal and fire properties of polypropylene: An application to multifilament yarn

Composites Part A: Applied Science and Manufacturing

Volumn 41, Issue 12, 2010, Pages 1797-1806

  Vargas, Andrés F ^a,c   Orozco, Víctor H ^a,c   Rault, Francois ^b,c   Giraud, Stephane ^b,c   Devaux, Eric ^b,c   López, Betty L ^a  

^a UNIVERSIDAD DE ANTIOQUIA   (Colombia)

^b UNIV LILLE   (France)

^c GEMTEX   (France)

Author keywords

A. Nano structures; A. Polymer matrix composites (PMCs); B. Thermal properties

Indexed keywords

A. NANO-STRUCTURES; A. POLYMER-MATRIX COMPOSITES (PMCS); CONE CALORIMETRY; DRAWING PROCESS; DYNAMIC MECHANICAL PROPERTY; FIRE PROPERTIES; HEAT RELEASE RATES; KNITTED FABRIC; KNITTED STRUCTURES; MELT EXTRUSION; MULTIFILAMENT YARNS; NANO-FILLERS; THERMAL DECOMPOSITIONS; THERMAL PROPERTIES; THERMAL RESISTANCE;

AGRICULTURAL PRODUCTS; CARBON NANOTUBES; GRAFTING (CHEMICAL); KNIT FABRICS; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; MELT SPINNING; NANOSTRUCTURES; POLYPROPYLENES; PYROLYSIS; RHEOLOGY; SPINNING (FIBERS); THERMODYNAMIC PROPERTIES; THERMOPLASTICS;

POLYMER MATRIX COMPOSITES;

EID: 77958081997     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2010.08.018     Document Type: Article

References (46)

1. L.F. Giraldo, W. Brostow, E. Devaux, B.L. López, and L.D. Pérez Scratch and wear resistance of polyamide 6 reinforced with multiwall carbon nanotubes J Nanosci Nanotechnol 8 6 2008 3176 3183
2. A.F. Vargas, W. Brostow, H.E.H. Lobland, B.L. López, and O. Olea-Mejia Reinforcement of polymeric latexes by in situ polymerization J Nanosci Nanotechnol 9 9 2009 6661 6667
3. L.D. Pérez, J.F. López, V.H. Orozco, T. Kyu, and B.L. López Effect of the chemical characteristics of mesoporous silica MCM-41 on morphological, thermal, and rheological properties of composites based on polystyrene J Appl Polym Sci 111 5 2009 2229 2237
4. F. Rault, E. Pleyber, C. Campagne, M. Rochery, S. Giraud, and S. Bourbigot Effect of manganese nanoparticles on the mechanical, thermal and fire properties of polypropylene multifilament yarn Polym Degrad Stab 94 6 2009 955 964
5. E.A. Murillo, and B.L. López Study of the impact resistance of physically and dynamically vulcanized mixtures of PP/EPDM Macromol Symp 242 1 2006 131 139
6. C.K. Hong, M.J. Kim, S.H. Oh, Y.S. Lee, and C. Nah Effects of polypropylene-g-(maleic anhydride/styrene) compatibilizer on mechanical and rheological properties of polypropylene/clay nanocomposites J Ind Eng Chem 14 2 2008 236 242
7. T.K. Scott, F.D. Jack, and W.S. Francis The effect of nanoparticle shape on polymer-nanocomposite rheology and tensile strength J Polym Sci, Part B: Polym Phys 45 14 2007 1882 1897
8. D.P.N. Vlasveld, M. de Jong, H.E.N. Bersee, A.D. Gotsis, and S.J. Picken The relation between rheological and mechanical properties of PA6 nano- and micro-composites Polymer 46 23 2005 10279 10289
9. S.P. Bao, and S.C. Tjong Mechanical behaviors of polypropylene/carbon nanotube nanocomposites: the effects of loading rate and temperature Mater Sci Eng, A 485 1-2 2008 508 516
10. L.F. Giraldo, B.L. López, and W. Brostow Effect of the type of carbon nanotubes on tribological properties of polyamide 6 Polym Eng Sci 49 5 2009 896 902
11. E. Logakis, E. Pollatos, C. Pandis, V. Peoglos, I. Zuburtikudis, and C.G. Delides Structure-property relationships in isotactic polypropylene/multi- walled carbon nanotubes nanocomposites Compos Sci Technol 70 2 2010 328 335
12. L. Bokobza, A. Burr, G. Garnaud, M.Y. Perrin, and S. Pagnotta Fibre reinforcement of elastomers: nanocomposites based on sepiolite and poly(hydroxyethyl acrylate) Polym Int 53 8 2004 1060 1065
13. L. Bokobza, and J.-P. Chauvin Reinforcement of natural rubber: use of in situ generated silicas and nanofibres of sepiolite Polymer 46 12 2005 4144 4151
14. H. Chen, M. Zheng, H. Sun, and Q. Jia Characterization and properties of sepiolite/polyurethane nanocomposites Mater Sci Eng, A 445-446 2007 725 730
15. G. Tartaglione, D. Tabuani, G. Camino, and M. Moisio PP and PBT composites filled with sepiolite: morphology and thermal behaviour Compos Sci Technol 68 2 2008 451 460
16. J.-H. Chang, and M.K. Mun Synthesis and characterization of poly(butylene terephthalate) nanocomposite fibers: thermo-mechanical properties and morphology J Appl Polym Sci 100 2 2006 1247 1254
17. J.-H. Chang, and M.K. Mun Nanocomposite fibers of poly(ethylene terephthalate) with montmorillonite and mica: thermomechanical properties and morphology Polym Int 56 1 2007 57 66
18. J.-H. Chang, M.K. Mun, and J.-C. Kim Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: thermomechanical properties and morphology J Appl Polym Sci 102 5 2006 4535 4545
19. C. Ibanes, L. David, R. Seguela, C. Rochas, and G. Robert Structure and mechanical behavior of nylon 6 fibers filled with organic and mineral nanoparticles. II. In situ study of deformation mechanisms J Polym Sci, Part B: Polym Phys 42 14 2004 2633 2648
20. K.J. Kim, J.S. Lee, A.A. Prabu, and T.H. Kim Preparation and characterization of nylon 6/organoclay nanocomposite filament fibers Polym Compos 30 3 2009 265 273
21. F.P.L. Mantia, N.T. Dintcheva, R. Scaffaro, and R. Marino Morphology and properties of polyethylene/clay nanocomposite drawn fibers Macromol Mater Eng 293 1 2008 83 91
22. T. Mikolajczyk, S. Rabiej, M. Olejnik, and W. Urbaniak-Domagala Strength properties of polyimideamide nanocomposite fibers in terms of their porous and supermolecular structure J Appl Polym Sci 104 1 2007 339 344
23. S. Pavliková, R. Thomann, P. Reichert, R. Mülhaupt, A. Marcinčin, and E. Borsig Fiber spinning from poly(propylene)-organoclay nanocomposite J Appl Polym Sci 89 3 2003 604 611
24. S. Solarski, M. Ferreira, E. Devaux, G. Fontaine, P. Bachelet, and S. Bourbigot Designing polylactide/clay nanocomposites for textile applications: effect of processing conditions, spinning, and characterization J Appl Polym Sci 109 2 2008 841 851
25. S. Solarski, F. Mahjoubi, M. Ferreira, E. Devaux, P. Bachelet, and S. Bourbigot (Plasticized) polylactide/clay nanocomposite textile: thermal, mechanical, shrinkage and fire properties J Mater Sci 42 13 2007 5105 5117
26. W. Xiao, H. Yu, K. Han, and M. Yu Study on PET fiber modified by nanomaterials: improvement of dimensional thermal stability of PET fiber by forming PET/MMT nanocomposites J Appl Polym Sci 96 6 2005 2247 2252
27. S.H. Lee, and J.R. Youn Properties of polypropylene/layered-silicate nanocomposites and melt-spun fibers J Appl Polym Sci 109 2 2008 1221 1231
28. F. Rault, C. Campagne, M. Rochery, S. Giraud, and E. Devaux Polypropylene multifilament yarn filled with clay and/or graphite: study of a potential synergy J Polym Sci, Part B: Polym Phys 48 11 2010 1185 1195
29. S. Bourbigot, E. Devaux, and X. Flambard Flammability of polyamide-6/clay hybrid nanocomposite textiles Polym Degrad Stab 75 2 2002 397 402
30. M. Joshi, and V. Viswanathan High-performance filaments from compatibilized polypropylene/clay nanocomposites J Appl Polym Sci 102 3 2006 2164 2174
31. A.R. Horrocks, B.K. Kandola, G. Smart, S. Zhang, and T.R. Hull Polypropylene fibers containing dispersed clays having improved fire performance. I. Effect of nanoclays on processing parameters and fiber properties J Appl Polym Sci 106 3 2007 1707 1717
32. W.-M. Chiu, and Y.-A. Chang Chemical modification of multiwalled carbon nanotube with the liquid phase method J Appl Polym Sci 107 3 2008 1655 1660
33. V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, and A. Siokou Chemical oxidation of multiwalled carbon nanotubes Carbon 46 6 2008 833 840
34. L.F. Giraldo, M. Echeverri, and B.L. López Reinforcement of polyamide 6 with nanoparticles Macromol Symp 258 1 2007 119 128
35. G. Sandi, R.E. Winans, S. Seifert, and K.A. Carrado In situ SAXS studies of the structural changes of sepiolite clay and sepiolite carbon composites with temperature Chem Mater 14 2 2002 739 742
36. M. Alkan, G. Tekin, and H. Namli FTIR and zeta potential measurements of sepiolite treated with some organosilanes Microporous Mesoporous Mater 84 1-3 2005 75 83
37. E. Sabah, M. Turan, and M.S. elik Adsorption mechanism of cationic surfactants onto acid- and heat-activated sepiolites Water Res 36 16 2002 3957 3964
38. R. Dangtungee, J. Yun, and P. Supaphol Melt rheology and extrudate swell of calcium carbonate nanoparticle-filled isotactic polypropylene Polym Test 24 1 2005 2 11
39. B. Wong, and W.E. Baker Melt rheology of graft modified polypropylene Polymer 38 11 1997 2781 2789
40. P. Cassagnau Melt rheology of organoclay and fumed silica nanocomposites Polymer 49 9 2008 2183 2196
41. S.S. Sternstein, and A.-J. Zhu Reinforcement mechanism of nanofilled polymer melts as elucidated by nonlinear viscoelastic behavior Macromolecules 35 19 2002 7262 7273
42. A. Durmus, A. Kasgoz, and C.W. Macosko Linear low density polyethylene (LLDPE)/clay nanocomposites. Part I: structural characterization and quantifying clay dispersion by melt rheology Polymer 48 15 2007 4492 4502
43. M. Modesti, A. Lorenzetti, D. Bon, and S. Besco Thermal behaviour of compatibilised polypropylene nanocomposite: effect of processing conditions Polym Degrad Stab 91 4 2006 672 680
44. J.-M. Saiter, M. Negahban, P. dos Santos Claro, P. Delabare, and M.-R. Garda Quantitative and transient DSC measurements I. Heat capacity and glass transition J Mater Edu 30 2008 51 95
45. K.P. Menard Dynamic mechanical analysis - an introduction 2nd ed. 2008 CRC Press Boca Raton, Florida
46. T. Kashiwagi, E. Grulke, J. Hilding, K. Groth, R. Harris, and K. Butler Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites Polymer 45 12 2004 4227 4239