Improvement on SIFCON performance by fiber orientation and high-volume mineral admixtures

Journal of Materials in Civil Engineering

Volumn 22, Issue 11, 2010, Pages 1093-1101

  Yazici, Halit ^a   Aydin, Serdar ^a   Yiǧiter, Hüseyin ^a   Yardimci, Mert Y ^b   Alptuna, Giray ^a  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

^b ZONGULDAK KARAELMAS UNIVERSITY   (Turkey)

Author keywords

Curing; Fiber reinforced composites; Fly ash; Slag

Indexed keywords

BINARY COMBINATIONS; CLASS C FLY ASHES; COMPRESSIVE AND FLEXURAL STRENGTHS; FIBER ALIGNMENT; FIBER ORIENTATIONS; FIBER-CONCRETE; FIBER-REINFORCED COMPOSITES; FLEXURAL PROPERTIES; FLEXURAL STRENGTH; GROUND GRANULATED BLAST FURNACE SLAG; MECHANICAL PERFORMANCE; MERCURY POROSIMETERS; MINERAL ADMIXTURES; ORDINARY PORTLAND CEMENT; SCANNING ELECTRON MICROSCOPE INVESTIGATION; STEEL FIBERS; TEST RESULTS; TOBERMORITE; TOTAL POROSITY; WATER/BINDER RATIOS;

ALIGNMENT; BENDING STRENGTH; BLAST FURNACES; COMPRESSIVE STRENGTH; CURING; FIBER REINFORCED PLASTICS; FIBERS; FLY ASH; FRACTURE ENERGY; FURNACES; MECHANICAL PROPERTIES; MERCURY (METAL); METAL REFINERIES; METALLURGICAL FURNACES; MINERALS; PORTLAND CEMENT; SCANNING ELECTRON MICROSCOPY; SILICATE MINERALS; SLAGS;

FRACTURE;

CEMENT; COMPOSITE; COMPRESSIVE STRENGTH; FLEXURE; FLY ASH; FRACTURE TOUGHNESS; PERFORMANCE ASSESSMENT; POROSITY; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SLAG; SLURRY;

EID: 77957913705     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)MT.1943-5533.0000114     Document Type: Article

References (26)

1. Aldea C.M. Young F. Wang K. Shah S.P. Effects of curing conditions on properties of concrete using slag replacement. Cem. Concr. Res. 2000, 30:465-472. CCNRAI, 0008-8846, 10.1016/S0008-8846(00)00200-3, and.
2. Bilodeau A. Sivasundaram V. Painter K.E. Malhotra V.M. Durability of concrete incorporating high volumes fly ash from sources in the U.S.A. ACI Mater J. 1994, 91:3-12. 0002-7820,
3. Doǧan E. Retrofit of non-ductile reinforced concrete frames using high performance fiber reinforced composites. 2000, Ph.D. thesis, Civil Engineering, North Carolina State Univ Raleigh, N.C.
4. Specification and guidelines for self-compacting concrete 2002, EFNARC, European Federation for Specialist Construction Chemicals and Concrete Systems, Norfolk, U.K.
5. 2O pressure up to 200°C. Cem. Concr. Res. 2003, 33:271-279. CCNRAI, 0008-8846, 10.1016/S0008-8846(02)00959-6, and.
6. Homrich J.R. Naaman A.E. Stress-strain properties of SIFCON in compression. Fiber reinforced concrete properties and applications, ACI, SP-105 1987, 244-251. and American Concrete Institute, Detroit.
7. Lankard D.R. Properties, applications: Slurry infiltrated fiber concrete (SIFCON). Concr. Int. 1984, 6:44-47. CNCIEH, 0162-4075, (12).
8. Maeder U. Gamboa I.L. Chaigmon J. Lombard J.P. Ceracem, a new high performance concrete: Characterizations and applications. Proc Int. Symp. on Ultra High Performance Concrete 2004, 59-68. and Kassel Univ. Press, Kassel, Germany.
9. Malhotra V.M. Mehta P.K. High-performance, high-volume fly ash concrete. Supplementary cementing materials for sustainable development Inc. 2002, Marquardt Printing, Ottawa.
10. Mehta P.K. Monteiro J.M. P. Concrete (microstructure, propertiesmaterials) 20063rd Ed McGraw-Hill, New York.
11. Murakami H. Zeng J.Y. Experimental and analytical study of SIMCON tension members. Mech. Mater. 1998, 28:181-195. MSMSD3, 0167-6636, 10.1016/S0167-6636(97)00060-4, and.
12. Naaman A.E. Homrich J.R. Tensile stress-strain properties of SIFCON. ACI Mater. J. 1989, 3:244-251. AMAJEF, 0889-325X, and.
13. Naaman A.E. Otter D. Najm H. Elastic modulus of SIFCON in tension and compression. ACI Mater. J. 1992, 6:603-613. AMAJEF, 0889-325X, and.
14. Naaman A.E. Wight J.K. Abdou H. SIFCON connections for seismic resistant frames. Concr. Int. 1987, 11:34-39. CNCIEH, 0162-4075, and.
15. Neville A.M. Properties of concrete 1995, Longman, New York.
16. Odler I. Hydration, setting and hardening of Portland cement. Lea's chemistry of cement and concrete 1997, 288-289. P. C. Hewlett, ed Butterworth-Heinemann, Oxford, U.K.
17. Determination of fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater. Struct. 1985, 18:285-290. RILEM50-FMC Committee of Fracture Mechanics of Concrete, MASTED, 1359-5997, 10.1007/BF02472917
18. Scrivener K.L. Backscattered electron imaging of cementitious microstructures: Understanding and quantification. Cem. Concr. Compos. 2004, 26:935-945. CCOCEG, 0958-9465, 10.1016/j.cemconcomp.2004.02.029.
19. Shi C. Hu S. Cementitious properties of ladle slag fines under autoclave curing conditions. Cement Concr. Res. 2003, 33:1851-1856. 10.1016/S0008-8846(03)00211-4, 0008-8846, and.
20. Sonebi M. Svermova L. Bartos P.J. M. Factorial design of cement slurries containing limestone powder for self-consolidating slurry-infiltrated fiber concrete. ACI Mater. J. 2004, 2:136-145. AMAJEF, 0889-325X, and.
21. Sonebi M. Svermova L. Bartos P.J. M. Statistical modeling of cement slurries for self-compacting SIFCON containing silica fume. Mater. Struct. 2005, 38:79-86. MASTED, 1359-5997, 10.1007/BF02480578, and.
22. Stiel T. Karihaloo B.L. Fehling E. Effect of casting direction on the mechanical properties of CARDIFRC. Proc Int. Symp. on Ultra High Performance Concrete 2004, 481-493. and Kassel Univ. Press, Kassel, Germany.
23. Wood B.T. Use of slurry infiltrated fiber concrete (SIFCON) in hinge regions for earthquake resistant structures. 2000, Ph.D. thesis, Civil Engineering, North Carolina State Univ Raleigh, N.C.
24. Yan A. Wu K. Zhang X. A quantitative study on the surface crack pattern of concrete with high content of steel fiber. Cem. Concr. Res. 2002, 32:1371-1375. CCNRAI, 0008-8846, 10.1016/S0008-8846(02)00788-3, and.
25. Yang Q. Zhang S. Huang S. He Y. Effect of ground quartz sand on properties of high-strength concrete in the steam-autoclaved curing. Cem. Concr. Res. 2000, 30:1993-1998. CCNRAI, 0008-8846, 10.1016/S0008-8846(00)00395-1, and.
26. Yazi{dotless}ci{dotless} H. Yiǧiter H. Aydi{dotless}n S. Baradan B. Autoclaved SIFCON with high volume Class C fly ash binder phase. Cem. Concr. Res. 2006, 36:481-486. CCNRAI, 0008-8846, 10.1016/j.cemconres.2005.10.002, and.