Reliability-based robust multi-objective crashworthiness optimisation of S-shaped box beams with parametric uncertainties

International Journal of Crashworthiness

Volumn 15, Issue 4, 2010, Pages 443-456

  Khakhali, A ^a   Nariman Zadeh, Nader ^a,b,c   Darvizeh, A ^a   Masoumi, A ^c   Notghi, B ^b  

^a UNIVERSITY OF GUILAN   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

^c UNIVERSITY OF TEHRAN   (Iran)

Author keywords

crashworthiness; genetic algorithm; GMDH; multi objective optimisation; Pareto; reliability; robust design; S shaped box beam

Indexed keywords

GMDH; MULTIOBJECTIVE OPTIMISATION; PARETO; ROBUST DESIGNS; S-SHAPED;

ABSORPTION; COMPUTER SIMULATION; CRASHWORTHINESS; CRUSHING; DATA HANDLING; FINITE ELEMENT METHOD; GENETIC ALGORITHMS; MATHEMATICAL MODELS; MONTE CARLO METHODS; NEURAL NETWORKS; PARETO PRINCIPLE; PRODUCT DESIGN; RELIABILITY;

MULTIOBJECTIVE OPTIMIZATION;

EID: 77957848755     PISSN: 13588265     EISSN: 17542111     Source Type: Journal    
DOI: 10.1080/13588261003696458     Document Type: Article

References (46)

1. W. Abramowicz and N. Jones, Dynamic axial crushing of square tubes, Int. J. Impact Energy 2 (1984), pp. 179-208. (Pubitemid 14668662)
2. C.A. Coello andA.D. Christiansen, Multiobjective optimization of trusses using genetic algorithms, Int. J. Comput. Struct. 75 (2000), pp. 647-660.
3. C.A. Coello, D.A. Van Veldhuizen, and G.B. Lamont, Evolutionary Algorithms for Solving Multi-objective Problems, Kluwer Academic Publishers, New York, 2002.
4. L.G. Crespo and S.P. Kenny, Robust control deign for systems with probabilistic uncertainty. TP-2005-213531, NASA report, NASA, Washington, DC, 2005.
5. O. Ditlevsen and O.H. Madsen, Structural Reliability Methods, John Wiley and Sons, New York, 1996.
6. U.M.Diwekar and J.R. Kalagnaman, Efficient sampling technique for optimization under uncertainty, Am. Inst. Chem. Eng. J. 43 (1997), pp. 440-447.
7. S.J. Farlow, Self-Organizing Method in Modeling: GMDH Type Algorithm, Marcel Dekker Inc., New York, 1984.
8. C.M. Fonseca and P.J. Fleming, Genetic Algorithms for Multi-objective Optimization: Formulation, Discussion and Generalization, Proceedings of the Fifth International Conference On Genetic Algorithms, S. Forrest, ed., Morgan Kaufmann, San Mateo, CA, 1993, pp. 416-423.
9. C.M. Fonseca, and P.J. Fleming, Nonlinear System Identification with Multiobjective Genetic Algorithms, in Proceedings of 13th World Congress International Federation of Automatic Control, Pergamon Press, San Francisco, CA, 1996, pp. 187-192.
10. D.E. Goldberg, Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, New York, 1989.
11. N.K. Gupta and R. Velmurugan, Consideration of internal folding and non-symmetric fold formation axisymmetric axial collapse round tubes, Int. J. Solids Struct. 34 (1997), pp. 2611-2630.
12. P. Hosseini-Tehrani and M. Nikahd, Two materials S-frame representation for improving crashworthiness and lightening, Int. J. Thin-Walled Struct. 44 (2006), pp. 407-414.
13. G.W. Housner, L.A. Bergman, T.K. Caughey, A.G. Chassiakos, R.O. Claus, S.F. Masri, R.E. Skelton, T.T. Soong, B.F. Spencer, and J.T.P. Yao, Structural control: past, present, and future, Int. J. Eng. Mech. 123 (1997), pp. 897-971.
14. H. Iba, T. Kuita, H. deGaris, and T. Sator, System Identification Using Structured Genetic Algorithms, Proceedings of 5th International Conference on Genetic Algorithms, ICGA'93, Urbana, IL, 1993.
15. A.G. Ivakhnenko, Polynomial theory of complex systems, IEEE Trans. Syst., Man, Cybern. SMC-1 (1971), pp. 364- 378.
16. A. Jamali, A. Hajiloo, and N. Nariman-zadeh, Reliabilitybased robust Pareto design of linear state feedback controllers using a multi-objective uniform-diversity genetic algorithm (MUGA), Int. J. Expert Syst. Appl. 37 (2010), pp. 401-413.
17. A. Jamali, N. Nariman-zadeh, A. Darvizeh, A. Masoumi, and S. Hamrang, Multi-objective evolutionary optimization of polynomial neural networks for modelling and prediction of explosive cutting process, Int. J. Eng. Appl. Artif. Intell. 22 (2009), pp. 676-687.
18. W. Johnson, Impact Strength of Material, Edward Arnold, London, UK, 1972.
19. H-S. Kim and T. Wierzbicki, Effect of the cross-sectional shape of hat-type cross-sections on crash resistance of an "S"-frame, Int. J. Thin-Walled Struct. 39 (2001), pp. 535- 554. (Pubitemid 32610330)
20. H-S. Kim and T.Wierzbicki, Closed-form solution for crushing response of three-dimensional thin-walled S frames with rectangular cross-sections, Int. J. Impact Eng. 30 (2004), pp. 87-112.
21. J.Koza, Genetic Programming, on the Programming of Computers by Means of Natural Selection, MIT Press, Cambridge, MA, 1992.
22. K. Kristinson and G. Dumont, System identification and control using genetic algorithms, IEEE Trans. Syst., Man, Cybern. 225 (1992), pp. 1033-1046.
23. X. Liao, Q. Li, X. Yang, W. Li, and W. Zhang, A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact, Int. J. Crashworthiness 13 (2008), pp. 279-288.
24. D. Lim, Y.S. Ong, and B.S. Lee, Inverse Multi-objective Robust Evolutionary Design Optimization in the Presence of Uncertainty. GECCO'05,Washington, DC, 2005, pp. 55- 62.
25. D. Lönn, M. Ö man, L. Nilsson, and K. Simonsson, Finite element based robustness study of a truck cab subjected to impact loading, Int. J. Crashworthiness 14 (2009), pp. 111- 124.
26. H.G. Matthies, C.E. Brenner, C.G. Bucher, and C.G. Soares, Uncertainties in probabilistic numerical analysis of structures and solids - Stochastic finite elements, Int. J. Struct. Safety 19 (1997), 283-336.
27. Q. Meng, S.T.S. Al-Hassani, and P.D. Soden, Axial crushing of square tubes, Int. J. Mech. Sci. 25-9 (1983), pp. 743- 773.
28. J.-A. Mueller and F. Lemke, Self-Organising Data Mining: An Intelligent Approach to Extract Knowledge From Data. Pub. Libri, Hamburg, 2000.
29. N. Nariman-Zadeh, K. Atashkari, A. Jamali, A. Pilechi, and X. Yao, Inverse modeling of multi-objective thermodynamically optimized turbojet engine using GMDH-type neural networks and evolutionary algorithms, Int. J. Eng. Optim. 37 (2005), pp. 437-462.
30. N. Nariman-Zadeh, A. Darvizeh, and G.R. Ahmad-Zadeh, Hybrid genetic design of GMDH-type neural networks using singular value decomposition for modelling and prediction of the explosive cutting process, Proc. I MECH E Part B J. Eng. Manuf. 217 (2003), pp. 779-790.
31. N. Nariman-zadeh, A. Darvizeh, M. Darvizeh, and H. Gharababaei, Modelling of explosive cutting process of plates using GMDH-type neural network and singular value decomposition, Int. J. Mater. Process. Technol. 128 (2002), pp. 80-87(8).
32. N. Nariman-Zadeh, A. Darvizeh, M.E. Felezi, and H. Gharababaei, Polynomial modelling of explosive compaction process of metallic powders using GMDHtype neural networks and singular value decomposition, Int. J. Modelling Simul. Mater. Sci. Eng. 10 (2002), pp. 727-744.
33. C.M. Ni, Impact Response of Curved Box Beam Columns with Large Global and Local Deformations, Proceedings of the 14th Structures, Structural Dynamics and Materials Conference, King of Prussia, PA, AIAA Paper No. 73-401, 1976.
34. Y. Ohkami, K. Abe, and M. Ohta, Collapse of thin-walled curved beam with closed-hat section - Part 1: Study on collapse characteristics, SAE Paper 900460, 1990.
35. S. Okazawaa, K. Oideb, K. Ikeda, and K. Terada, Imperfection sensitivity and probabilistic variation of tensile strength of steel members, Int. J. Solids Struct. 39 (2002), pp. 1651- 1671.
36. A. Osyezka, Multicriteria optimization for engineering design, in Design Optimization, J.S. Gero (Ed.), Academic Press, New York, 1985, pp. 193-227.
37. M. Papadrakakis, N.D. Lagaros, and V. Plevris, Structural optimization considering the probabilistic system response, Int. J. Theoret. Appl. Mech. 31 (2004), pp. 361-393.
38. V. Pareto, Cours d'Economic Ploitique, Rouge, Lausanne, Switzerland, 1896.
39. A.G. Pugsley and M. Macaulay, The large scale crumpling of thin cylindrical columns, Int. J. Mech. Appl. Math. 13 (1960), pp. 1-9.
40. K. Rodríguez-Vázquez, Multiobjective evolutionary algorithms in non-linear system identification, Ph.D. thesis, Department of Automatic Control and Systems Engineering, The University of Sheffield, Sheffield, UK, 1999.
41. C.A. Schenk and G.I. Schuëller, Uncertainty Assessment of Large Finite Element Systems, Springer-Verlag, Berlin/Heidelberg/New York, 2005.
42. B.A. Smith, S.P. Kenny, and L.G. Crespo, Probabilistic parameter uncertainty analysis of single input single output control systems, NASA Rep. TM-2005-213280, NASA, Washington, DC, 2005.
43. N. Srinivas and K. Deb, Multiobjective optimization using nondominated sorting in genetic algorithms, Int. J. Evol. Comput. 2 (1994), pp. 221-248.
44. A. Toffolo and E. Benini, Genetic diversity as an objective in multi-objective evolutionary algorithms, Evol. Comput. 11 (2003), pp. 151-167.
45. H.R. Zarei and M. Kröger, Crashworthiness optimization of empty and filled aluminum crash boxes, Int. J. Crashworthiness 12 (2007), pp. 255-264.
46. L. Zheng and T. Wierzbicki, Quasi-static crushing of Sshaped aluminum front rail, Int. J. Crashworthiness 9 (2004), pp. 155-173.