Calibration of an impinging jet injector suitable for liquid and gelled hypergolic propellants

45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

Volumn , Issue , 2009, Pages

  James, M D ^a   Kubal, T D ^a   Son, S F ^a   Anderson, W E ^a   Pourpoint, T L ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FUMED SILICAS; HIGH SPEED IMAGE; HYPERGOLIC PROPELLANTS; IMPINGING JET; JET IMPINGEMENT; JET VELOCITIES; LIQUID JETS; LIQUID SHEETS; STEADY-STATE VELOCITY; UNDER WATER; WATER JETS;

JET PUMPS; JETS; LIQUIDS; PROPULSION; SILICA;

GELATION;

EID: 77957842080     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (35)

1. Hodge, K., et al., "Gelled Propellants for Tactical Missile Applications," 35th AIAA/ASME/SAE/ASEE Joint-Propulsion Conference & Exhibit, AIAA, Reston, VA, 1999.
2. Hampton, C. S., et al., "Importance of Chemical Delay Time in Understanding Hypergolic Ignition Behaviors," 41st Aerospace Sciences Meeting and Exhibit, AIAA, Reston, VA, 2003.
3. Cloyd, D. R. and Murphy, W. J., "Handling Hazardous Materials - Technological Survey," NASA SP-5039, Washington, D.C., 1965.
4. Ryan, H. M., et al., "Atomization Characteristics of Impingign Liquid Jets," Journal of Propulsion and Power, Vol. 11, No. 1, pp. 135-145, 1995.
5. Jung, K., et al., "The Breakup Characteristics of Liquid Sheets Formed by Like-Doublet Injectors," 38th AIAA/ASME/SAE/ASEE Jount Propulsion Conference & Exhibit, AIAA, Reston, VA, 2002.
6. Jung, K., et al., "Effects of Orifice Internal Flow on Breakup Characteristics of Like-Doublet Injectors," Journal of Propulsion and Power, Vol. 22, No. 3, pp. 653-660, 2006.
7. Heidmann, M. F. and Humphrey, J. C., "Fluctuations in a Spray Formed by Two Impinging Jets," National Advisory Committe for Aeronautics, Technical Note 2349, Washington, 1951.
8. Heidmann, M. F., et al., "A Study of Sprays Formed by Two Impinging Jets," National Advisory Committee for Aeronautics, Technical Note 3835, Washington, 1957.
9. Nurick, W. H., "Orifice Cavitation and Its Effect on Spray Mixing," Journal of Fluids Engineering, Vol. 98, Ser. 1, No. 1, pp. 681-687, 1976.
10. Anderson, W. E., et al., "Impact Wave-Based Model of Impinging Jet Atomization," Atomization and Sprays, Vol. 16, No. 7, pp. 791-805, 2006.
11. nd ed. Vol., John Wiley & Sons, Inc., New York, 1987.
12. Kraynik, A. M., et al., "Gelled Propellant Flow: Boundary Layer Theory for Power-Law Fluids in a Converging Planar Channel," United States, 1989.
13. Rahimi, S., and Natan, B., "The Injection Process of Gel Fuels," 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA, Reston, VA, 1997.
14. Rahimi, S. and Natan, B., "Flow of Gel Fuels in Tapered Injectors," Journal of Propulsion and Power, Vol. 16, No. 3, pp. 458-464, 2000.
15. Rahimi, S. and Natan, B., "Numerical Solution of the Flow of Power-Law Gel Propellants in Converging Injectors," Propellants Explosives Pyrotechnics, Vol. 25, No. 4, pp. 203-212, 2000.
16. Rahimi, S. and Natan, B., "Thixotropic Effect of Inorganic Gel Fuels," Journal of Propulsion and Power, Vol. 16, No. 6, pp. 1182-1184, 2000.
17. Rahimi, S., et al., "On Shear Rheology of Gel Propellants," Propellants, Explosives, Pyrotechnics, Vol. 32, No. 2, pp. 165-174, 2007.
18. Madlener, K., "The Flow and Spray Characteristics of Gelled Fluids; Die Stroemungs- und Verspruehungseigenschaften gelfoermiger Fluide," Germany, 2008.
19. th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA, Reston, VA, 1994.
20. rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA, Reston, VA, 1997.
21. Green, J., et al., "Flow Visualization of a Rocket Injector Spray Using Gelled Propellant Simulants," Lewis Research Center, NASA-CR-187142, Brook Park, OH, 1991.
22. Rahimi, S., and Natan, B., "Atomization of Gel Propellants Through an Air-Blast Triplet Atomizer," Atomization and Sprays, Vol. 16, No. 4, pp. 379-400, 2006.
23. von Kampen, J., et al., "Spray and Combustion Characteristics of Aluminized Gelled Fuels with an Impinging Jet Injector," Aerospace Science and Technology, Vol. 11 No. 1, pp. 77-83, 2007.
24. von Kampen, J., et al., "Some Aspects of the Atomization Behavior of Newtonian and of Shear-thinning Gelled non-Newtonian Fluids with an Impinging Jet Injector," ed: DLR - German Aerospace Center, 2006.
25. nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA, Reston, VA, 2006.
26. th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA, Reston, VA, 2001.
27. th International Annual Conference of ICT & 32nd International Pyrotechnics Seminar, Karlsruhe, Federal Republic of Germany, 2005
28. th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA, Reston, VA, 1998.
29. nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA, Reston, VA, 2006.
30. Rupe, J. H., "The Liquid-Phase Mixing of a Pair of Impinging Streams," Jet Propulsion Laboratory, Progress Report No. 20-195, Pasadena, CA, 1953.
31. J. Houseman, "Optimum Mixing of Hypergolic Propellants in an Unlike Doublet Injector Element," AIAA Journal, Vol. 8, No. 3, pp. 597-599, 1970.
32. Lefebvre, A. H., Atomization and Sprays. Hemisphere, Philadelphia, 1989, Ch. 2.
33. Ibrahim, E. A., and Outland, B. E., "A Non-linear Model for Impinging Jets Atomization," Journal of Mechanical Engineering Science, Vol. 222, Iss. C, pp. 213-224, 2008.
34. Nurick, W. H., "Analysis of Sprays from Rocket Engine Injectors," Journal of Spacecraft and Rockets, Vol. 8, No. 7, pp. 796-798, 1971.
35. Coguill, S. L., "Synthesis Of Highly Loaded Gelled Propellants," Resodyn Corporations, South Franklin Butte, MT.