Efficient and robust traction laws for the modeling of adhesively bonded joints

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn , Issue , 2008, Pages

  Gustafson, Peter A ^a,b   Waas, Anthony M ^a,b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b AIAA ^*

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE JOINTS; ADHESIVES; EFFICIENCY; STRUCTURAL DYNAMICS;

ADHESIVELY BONDED JOINTS; BETA DISTRIBUTIONS; COHESIVE ZONE METHODS; DE-COHESION; EFFICIENCY GAIN; SINE FUNCTIONS; TRACTION LAW;

COMPUTATIONAL EFFICIENCY;

EID: 77957779540     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2008-1847     Document Type: Conference Paper

References (60)

1. Wooley, G. R. and Carver, D. R., "Stress Concentration Factors for Bonded Lap Joints," J. Aircraft, Vol. 8, 1971, pp. 817-820.
2. Adams, R. D. and Peppiatt, N. A., "Stress Analysis of Adhesive-Bonded Lap Joints," J. Strain Analysis, Vol. 9, No. 3, 1974, pp. 185-196.
3. Kafkalidis, M. S. and Thouless, M. D., "The effects of geometry and material properties on the fracture of single lap-shear joints," Int J Solids Struct, Vol. 39, No. 17, Aug. 2002, pp. 4367-4383.
4. Xie, D., Waas, A. M., Shahwan, K. W., Schroeder, J. A., and Boeman, R. G., "Fracture criterion for kinking cracks in a tri-material adhesively bonded joint under mixed mode loading," Eng Fract Mech, Vol. 72, No. 16, Nov. 2005, pp. 2487-2504.
5. Li, S., Thouless, M., Waas, A., Schroeder, J., and Zavattieri, P., "Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite," Compos Sci Technol., Vol. 65, No. 3-4, March 2005, pp. 537-549.
6. Li, S., Thouless, M., Waas, A., Schroeder, J., and Zavattieri, P., "Competing failure mechanisms in mixed-mode fracture of an adhesively bonded polymer-matrix composite," Int. J. Adhes. Adhes., Vol. 26, No. 8, Dec. 2006, pp. 609-616.
7. Valoroso, N. and Champaney, L., "A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies," Eng Fract Mech, Vol. 73, No. 18, Dec. 2006, pp. 2774-2801.
8. Hillerborg, A., Modeer, M., and Petersson, P., "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements," Cem. Conor. Res., Vol. 6, 1976, pp. 773-782.
9. Song, S. J. and Waas, A. M., "Mode I failure of laminated polymeric composites," Eng Fract Mech, Vol. 49, No. 1, 1994, pp. 17-27.
10. Song, S. J. and Waas, A. M., "Energy-based mechanical model for mixed mode failure of laminated composites," AIAA J, Vol. 33, No. 4, 1995, pp. 739-745.
11. Borg, R., Nilsson, L., and Simonsson, K., "Simulation of delamination in fiber composites with a discrete cohesive failure model," Composites Science and Technology, Vol. 61, No. 5, April 2001, pp. 667-677.
12. Borg, R., Nilsson, L., and Simonsson, K., "Modeling of delamination using a discretized cohesive zone and damage formulation," Composites Science and Technology, Vol. 62, No. 10-11, Aug. 2002, pp. 1299-1314.
13. Xie, D. and Waas, A. M., "Discrete cohesive zone model for mixed-mode fracture using finite element analysis," Eng Fract Mech, Vol. 73, No. 13, Sept. 2006, pp. 1783-1796.
14. Xie, D., Salvi, A. G., Sun, C., Waas, A. M., and Caliskan, A., "Discrete Cohesive Zone Model to Simulate Static Fracture in 2D Triaxially Braided Carbon Fiber Composites," Journal of Composite Materials, 2006.
15. Gustafson, P. A. and Waas, A. M., "T650/AFR-PE-4/FM680-1 Mode I Critical Energy Release Rate at High Temperatures: Experiments and Numerical Models," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 48th Structures, Structural Dynamics, and Materials Conference, Apr 23-26 2007, Honolulu HI, No. 2007-2305, American Institute of Aeronautics and Astronautics, 2007.
16. Gillespie, Jr, J. W., Carlsson, L. A., and Pipes, R. B., "Finite element analysis of the end notched flexure specimen for measuring mode II fracture toughness," Compos Sci Technol, Vol. 27, No. 3, 1986, pp. 177-197.
17. Wang, J. T., Raju, I. S., and Sleight, D. W., "Fracture mechanics analyses of composite skin-stiffener debond configurations with shell elements," No. 94-1389 -CP, 1994.
18. Glaessgen, E., Raju, I., and C.C. Poe, J., "Fracture mechanics analysis of stitched stifiener-skin debonding," 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, No. 98-2022, 1998.
19. Krueger, R., "Virtual crack closure technique: History, approach, and applications," Applied Mechanics Reviews, Vol. 57, No. 2, 2004, pp. 109-143.
20. Xie, D., Waas, A. M., Shahwan, K. W., Schroeder, J. A., and Boeman, R. G., "Computation of Energy Release Rates for Kinking Cracks based on Virtual Crack Closure Technique," Computer Modeling in Engineering & Sciences, Vol. 6, 2004, pp. 515-524.
21. Xie, D., Salvi, A. G., Waas, A. M., and Caliskan, A., "Discrete cohesive zone model to simulate static fracture in carbon fiber textile composites," 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structrual Dynamics and Materials Conference, 2005.
22. Xie, D. and Biggers, Jr, S. B., "Progressive crack growth analysis using interface element based on the virtual crack closure technique," Finite Elem. Anal. Des., Vol. 42, No. 11, 2006, pp. 977-984.
23. de Borst, R., "Numerical aspects of cohesive-zone models," Eng Fract Mech, Vol. 70, No. 14, Sept. 2003, pp. 1743-1757.
24. Munoz, J., Galvanetto, U., and Robinson, P., "On the numerical simulation of fatigue driven delamination with interface elements," Int J Fatigue, Vol. 28, No. 10, Oct. 2006, pp. 1136-1146.
25. Goncalves, J. P. M., de Moura, M. F. S. F., and de Castro, P. M. S. T., "A three-dimensional finite element model for stress analysis of adhesive joints," Int. J. Adhes. Adhes., Vol. 22, No. 5, 2002, pp. 357-365.
26. Goyal, V. K., Johnson, E. R., and Cassino, C., "Computational model for progressive failure of adhesivley bonded joints," 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structrual Dynamics and Materials Conference, 2003.
27. Davies, G., Hitchings, D., and Ankersen, J., "Predicting delamination and debonding in modern aerospace composite structures," Compos Sci Technol, Vol. 66, No. 6, May 2006, pp. 846-854.
28. Davidson, B. D., Gharibian, S. J., and Yu, L., "Evaluation of energy release rate-based approaches for predicting delamination growth in laminated composites," Int J Fracture, Vol. V105, No. 4, Oct. 2000, pp. 343-365.
29. Pietruszczak, S. and Mroz, Z., "Finite element analysis of deformation of strain-softening materials," Int J Numer Meth Eng, Vol. 17, No. 3, 1981, pp. 327-334.
30. Ungsuwarungsri, T. and Knauss, W., "The role of damage-softened material behavior in the fracture of composites and adhesives," Int J Fracture, Vol. 35, No. 3, 1987, pp. 221-241.
31. Tvergaard, V. and Hutchinson, J., "The Relation Between Crack Growth Resistance and Fracture Process Parameters in Elastic-Plastic Solids," Journal of the Mechanics and Physics of Solids(UK), Vol. 40, No. 6, 1992, pp. 1377-1397.
32. Schellekens, J. and de Borst, R., "On the numerical integration of interface elements," Int J Numer Meth Eng, Vol. 36, No. 43-66, 1993, pp. 30-31.
33. Xu, X. and Needleman, A., "Numerical simulations of fast crack growth in brittle solids," J. Mech. Phys. Solids, Vol. 42, No. 9, 1994, pp. 1397-1407.
34. Camacho, G. and Ortiz, M., "Computational modelling of impact damage in brittle materials," Int J Solids Struct, Vol. 33, No. 20, 1996, pp. 2899-2938.
35. Simulia, I., Abaqus User Manual v6.7, Electronic Version, 2007.
36. Camanho, P. P. and Davila, C. G., "Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials," Tech. Rep. TM-2002-211737, NASA, 2002.
37. Alpha STAR Corp., GENOA, 5199 East Pacific Coast Highway, Suite 410 Long Beach, California 90804 USA, 2008.
38. Sandia National Laboratory, Tahoe User Guide, 3rd ed., May 2003.
39. Albouyso, V., Allix, O., Ladeveze, P., and Leveque, D., "Interfacial approach of delamination: possibilities and difficulties," Proceedings of the 12th International Conference on Composite Materials, Paris, France., 1999.
40. de Borst, R., "Some recent issues in computational failure mechanics," Int. J. Numer. Meth. Engng, Vol. 52, No. 5, 2001, pp. 63-96.
41. Zhou, F. and Molinari, J., "Dynamic crack propagation with cohesive elements: a methodology to address mesh dependency," Int. J. Numer. Meth. Engng, Vol. 59, 2004, pp. 1-24.
42. Oterkus, E., Barut, A., Madenci, E., Smeltzer, S., and Ambur, D., "Nonlinear analysis of bonded composite single-lap joints," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 45th Structures, Structural Dynamics, and Materials Conference, April 19-22, Palm Springs, CA, No. 2004-1560, American Institute of Aeronautics and Astronautics, 2004.
43. Oterkus, E., Madenci, E., Smeltzer, S., and Ambur, D., "Nonlinear analysis of bonded composite tubular lap joints," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 46th Structures, Structural Dynamics, and Materials Conference, April 18-21, Austin, TX, No. 2005-2380, American Institute of Aeronautics and Astronautics, 2005.
44. Smeltzer, S. S. and Lundgren, E., "Analytical and Numerical Results for an Adhesively Bonded Joint Subjected to Pure Bending," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 47th Structures, Structural Dynamics, and Materials Conference, May 1-4 2006, Newport RI, No. 2006-1960, American Institute of Aeronautics and Astronautics, 2006.
45. Cui, W. and Wisnom, M., "A combined stress-based and fracture-mechanics-based model for predicting delamination in composites," Composites, Vol. 24, No. 6, 1993, pp. 467-474.
46. Shahwan, K. and Waas, A., "Non-self-similar decohesion along a finite interface of unilaterally constrained delaminations," Proceedings: Mathematical, Physical and Engineering Sciences, Vol. 453, No. 1958, 1997, pp. 515-550.
47. Davies, G. A. O., Robinson, P., Robson, J., and Eady, D., "Shear driven delamination propagation in two dimensions," Composites Part A: Applied Science and Manufacturing, Vol. 28, No. 8, June 1997, pp. 757-765.
48. Alfano, G. and Crisfield, M. A., "Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues," Int J Numer Meth Eng, Vol. 50, No. 7, 2001, pp. 1701-1736.
49. Mi, Y., Crisfield, M. A., Davies, G. A. O., and Hellweg, H. B., "Progressive Delamination Using Interface Elements," Journal of Composite Materials, Vol. 32, No. 14, July 1998, pp. 1246-1272.
50. Alfano, G. and Crisfield, M., "Solution strategies for the delamination analysis based on a combination of local-control arc-length and line searches," Internat. J. Numer. Methods Eng, Vol. 58, 2003, pp. 999-1048.
51. Corigliano, A., Mariani, S., and Pandolfi, A., "Numerical modeling of rate-dependent debonding processes in composites," Compos Struct, Vol. 61, No. 1-2, July 2003, pp. 39-50.
52. Reedy Jr, E., Mello, F., and Guess, T., "Modeling the Initiation and Growth of Delaminations in Composite Structures," Journal of Composite Materials, Vol. 31, No. 8, 1997, pp. 812.
53. Pandolfi, A., Krysl, P., and Ortiz, M., "Finite element simulation of ring expansion and fragmentation: The capturing of length and time scales through cohesive models of fracture," Int J Fracture, Vol. 95, No. 1, 1999, pp. 279-297.
54. Espinosa, H. D., Zavattieri, P. D., and Dwivedi, S. K., "A finite deformation continuum discrete model for the description of fragmentation and damage in brittle materials," J Mech Phys Solids, Vol. 46, No. 10, Oct. 1998, pp. 1909-1942.
55. Zavattieri, P. D., Raghuram, P. V., and Espinosa, H. D., "A computational model of ceramic microstructures subjected to multi-axial dynamic loading," J Mech Phys Solids, Vol. 49, No. 1, Jan. 2001, pp. 27-68.
56. Li, S., Thouless, M., Waas, A., Schroeder, J., and Zavattieri, P., "Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer-matrix composite," Eng Fract Mech, Vol. 73, No. 1, Jan. 2006, pp. 64-78.
57. Gustafson, P. A., Analytical and Experimental Methods for Adhesively Bonded Joints Subjected, to High Temperatures, Ph.D. thesis, University of Michigan, 2008.
58. Roudolff F. and Ousset, Y., "Comparison between two approaches for the simulation of delamination growth in a D.C.B. specimen," Aerospace Science and Technology, Vol. 6, No. 2, Feb. 2002, pp. 123-130.
59. Chaboche, J. L., Feyel, F., and Monerie, Y., "Interface debonding models: a viscous regularization with a limited rate dependency," Int J Solids Struct, Vol. 38, No. 18, May 2001, pp. 3127-3160.
60. Gustafson, P. A. and Waas, A. M., "The interactions of adhesive constitutive parameters and their effects on common adhesive experiments," Internation Journal of Solids and Structures, 2008, Submitted.