Aerosol route in processing of nanostructured functional materials

KONA Powder and Particle Journal

Volumn 27, Issue , 2009, Pages 84-106

  Milosevic, O ^a   Mancic, L ^a   Rabanal, M E ^a   Gomez, L S ^b   Marinkovic, K ^a  

^a INSTITUTE OF TECHNICAL SCIENCES   (Serbia)

^b UNIVERSIDAD CARLOS III DE MADRID   (Spain)

Author keywords

Aerosol; Luminescence; Nanoparticles; Phosphors; Synthesis

Indexed keywords

AEROSOLS; AMORPHOUS MATERIALS; DISPERSIONS; EUROPIUM; FUNCTIONAL MATERIALS; LIGHT EMISSION; LUMINESCENCE; METASTABLE PHASES; NANOCRYSTALLINE MATERIALS; NANOCRYSTALS; NANOPARTICLES; PHOSPHORS; REACTION RATES; SPRAY PYROLYSIS; SURFACE REACTIONS; SYNTHESIS (CHEMICAL);

CONTROLLED STOICHIOMETRY; DISTRIBUTED COMPONENTS; HEATING AND COOLING RATES; LUMINESCENCE PROPERTIES; PARTICLE PROCESSING; RESEARCH ACTIVITIES; SPHERICAL PARTICLE; STRUCTURES AND PROPERTIES;

ATMOSPHERIC MOVEMENTS;

EID: 77957695617     PISSN: 02884534     EISSN: 21875537     Source Type: Journal    
DOI: 10.14356/kona.2009010     Document Type: Article

References (110)

1. Tuller, H. (1997): Solid State Electrochemical Systems-Opportunities for Nanofabricated or Nanostructured Materials, J. Electroceram., 1(3) pp.211-218.
2. Messing, G.L. Zhang S.-C. and Jayanthi, G.V. (1993): Ceramic Powder Synthesis by Spray Pyrolysis, J. Amer. Ceram. Soc., 76 (11) pp.2707-805.
3. Gurav, A Kodas, T Pluym, T and Xiong, Y. (1993): Aerosol Processing of Materials, Aerosol Sci. Techn., 19, pp. 411-52.
4. Kodas, T. T. Hampden-Smith, M. J. (1999): Aerosol Processing of Materials, Wiley-VCH.
5. Milosevic, O. (1999): Aerosol Synthesis of Nanostructured Materials; in Advanced Science and Technology of Sintering, Edited by B. Stojanovic, M.V.Nikolic and V. Skorokhod, Kluwer Academic/Plenum Publishers, New York, pp.103-111.
6. Madler, L. (2004): Liquid-fed Aerosol Reactors for One-step Synthesis of Nano-structured Particles, KONA Powder and Particle Journal, 22, pp.107-119.
7. Okuyama K. and Lengorro I. W.(2003): Preparation of Nanoparticles via Spray Route, Chem.Eng. Sci., 58, pp.537-547.
8. Gurav, A., Kodas, T., Kauppinen, E., Joutsensaari, J. and Zilliacus, R. (1994): Phase evolution and gasphase particle size distributions during spray pyrolysis of (Bi,Pb)-Sr-Ca-Cu-O and Ag-(Bi,Pb)-Sr-Ca-Cu-O powders. Nanostr. Mater., 4 (5), pp.583-589.
9. Fukui, T., Ohara S. Naito, M. and Nogi, K. (2003): Performance and stability of SOFC anode fabricated from NiO/SYZ composite particles, J. Euro. Cer. Soc., 23 (15), pp.2963-2967.
10. 3+ Phosphor Particles Synthesized via Aerosol, J. Electrochem. Soc., 152, pp.G707-713.
11. Pratsinis S.E. and Vemury, S. (1996): Particle formation in gases: a review, Powder Techn. 88, pp.267-273.
12. Zachariah M. R. and Huzarewicz, S. (1991): Aerosol processing of YBaCuO superconductors in a flame reactor, J. Mater. Res., 6(2), pp.264-269.
13. Helble, J. J.(1998): Combustion aerosol synthesis of nanoscale ceramic powders, J. Aerosol Sci., 29 (5-6), pp.721-736.
14. Tani, T., Watanabe N. and Takatori, K. (2003): Emulsion combustion and flame spray synthesis of zinc oxide/silica particles, J. Nanopart. Res., 5(1-2), pp.39-46.
15. Mancic, L., Milosevic, O., Marinkovic, B., de Silva Lopes, M.F. and Rizzo, F. (2000) "The influence of urea on the formation process of Bi-Pb-Sr-Ca-Cu-O superconducting ceramics synthesized by spray pyrolysis method", Mat. Sci. Eng.: B, Vol 76(2), pp.127-132.
16. 3 nanoparticles by combustion spray pyrolysis, Mater. Lett., 58, pp.2932-2936.
17. Langlet, M., Joubert, J. C. (1992): The pyrosol process or the pyrolysis of an ultrasonically generated aerosol, in: C.N.R.Rao (Ed.), Chemistry of Advanced Materials, Blackwelll Scientific Publications, Oxford, pp.55-78.
18. 2 based thin films: the interplay between solution chemistry, growth rate and film morphology, Thin Solid Films, 376, pp.47-55.
19. 2 thin films, J.Mat.Process. Techn., 143-44, pp.41-45.
20. Marinkovic, K. (2009): Structural, morphological and functional properties of nanostructured rare-earth oxides obtained through aerosol synthesis, Master Science Thesis, Belgrade University.
21. Lang, R. J. (1962): Ultrasonic atomization of liquids, J. Acoust. Soc. Am. 34, pp.6-8.
22. Liu, T. Q., Sakurai, O., Mizutani, N. Kato, M. (1986): Preparation of spherical fine ZnO particles by the spray pyrolysis method using ultrasonic atomization technique, J. Mat. Sci., 21 pp.3698-3702.
23. Lenggoro, I. W., Okuyama, K., Fernandez de la Mora J. and Tohge, N. (2000): Preparation of ZnS nanoparticles by electrospray pyrolysis, J. Aerosol Sci., 31 (1) pp.121-136.
24. Chang, H-W., Okuyama, K. (2002): Optical properties of dense and porous spheroids consisting of primary silica nanoparticles, Aerosol Sci., 33, pp.1701-1720.
25. Ocaña M. and Matijevic, E. (1990): Preparation of uniform colloidal dispersions by chemical reactions in aerosols-V. Tin(IV) oxide, J.Aerosol Sci., 21(6), pp.811-20.
26. Nukiyama, S., Tanasawa, Y. (1993): An experiment on the atomization of liquid, Transactions of the Japan Society of Mechanical Engineering, 5, pp.136-143.
27. Maric, R., Fukui, T., Ohara, S., Yoshida, H., Nishimura, M., Inagaki T. and Miura, K. (2000): Powder Prepared by Spray Pyrolysis as an Electrode Material for Solid Oxide Fuel Cells, J. Mater. Sci., 35, pp.1-8.
28. 3 particles with nanometer size by spray pyrolysis", Mater. Lett. 18, pp.151-155.
29. 2 powders by ultrasonic spray pyrolysis, J. Am. Ceram. Soc. 76 (3) pp.10-15.
30. Fukui, T. Ohara, S. Naito, M. and Nogi, K. Morphogy and Performance of SOFC Anode Fabricated from NiO/YSZ Composite Perticles, J. Chem. Eng. Jpn., 34 (7), pp.964-966.
31. Chang, Y., Park S.B. and Kang, Y.W (1995): Preparation of high surface area nanophase particles by low pressure spray pyrolysis, Nanostr. Mater. 5, pp.777-791.
32. Li, Q., Sorensen, C.M., Klabunde K.J. and Hadjipanayis, G.C. (1993): Aerosol spray pyrolysis synthesis of magnetic manganese ferrite particles, Aerosol Sci. Techn. 19, pp.453-467.
33. Senzaki, Y., Caruso, J., Hampden-Smith, M.J., Kodas T.T. and Wang, L. M., (1995): Preparation of strontium ferrite particles by spray pyrolysis, J. Amer. Ceram. Soc. 78(11) pp.2973-2976.
34. Marinkovic, Z. V., Mancic, L., Maric, R., Milosevic, O. (2001): Preparation of nanostructured Zn-Cr-O spinel powders by ultrasonic spray pyrolysis, J. Europ. Ceram. Soc., 21 (10-11) pp.2051-2055.
35. Koch W. and Friedlander, S. K. (1990): Particle growth by coalescence and agglomeration, J. Aerosol Sci., 21(1) pp.S73-S76.
36. Okuyama, K., Lenggoro, I.W. (2003): Preparation of nanoparticles via spray route, Chemical Engineering Science, 58, pp.537-547.
37. Pluym, T.C., Powell, Q. H., Gurav, A.S., Ward T.L. and Kodas, T.T. (1993): Solid silver particles production by spray pyrolysis, J.Aerosol Sci. 24 (3) pp.383-392.
38. Marinkovic, Z.V., Mancic, L., Milosevic, O. (2004): Nature of structural changes in nanocrystalline ZnO powders under linear heating conditions, J. Euro. Cer. Soc., 24, pp.1929-1933.
39. Jayanthi, G.V., Zhang S.C. and Messing, G.L. (1993): Modeling of solid particle formation during solution aerosol thermolysis, Aerosol Sci. Techn. 19, 478-490.
40. Xiong Y. and Kodas, T. T. (1993): Droplet evaporation and solute precipitation during spray pyrolysis, J. Aerosol Sci. 24 (7) pp.893-908.
41. Milosevic, O., Gagic, V., Vodnik, J., Mitrovic, A., Karanovic, Lj., Stojanovic, B., Zivkovic, Lj. (1997): Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis, Thin Solid Films, 296, pp.44-48.
42. Milosevic, O., Mirkovic, M., Uskokovic, D. (1996): Characteristics and formation mechanism of BaTiO3 powders prepared by twin-fluid and ultrasonic spray-pyrolysis method, J. Am. Ceram. Soc., 79 (6) pp.1720-22.
43. 7, in: Ceramic Trans - Ceramic Powder Science III, G.L. Messing, S. Hirano, H. Hausner ed., American Ceramic Society, Westerville, OH.
44. Xiong, Y., Lyong S.W. and Kodas, T.T. (1995): Volatile metal oxide evaporation during aerosol decomposition, J.Am.Ceram.Soc. 78 (9) pp.2490-2496.
45. Patil, P.S. (1999): Versatility of chemical spray pyrolysis technique, Mater. Chem. Phys., 59, pp.185-198.
46. Uskokovic D. and Jokanovic, V. (2006): Molecular designing of fine particles using aerosol synthesis, in Advances in Dielectric Materials and Electronic Devices, ed. American Ceramic society, Ceramic Transactions, 174, pp.3-14.
47. Jung, S., Kang, Y.C., Kim, J.H. (2007): Generation of phosphor particles for photoluminescence applications by spray pyrolysis, J. Mater. Sci., 42, pp.9783-9794.
48. 3-YSZ Composite Particles by Spray Pyrolysis, J. Am. Ceram. Soc., 80, pp.261-263.
49. Fukui, T., Ohara, S. and Mukai, K. (1998): Long-Term Stability of Ni-YSZ Anode with a New Microstructure Prepared from Composite Powder", Electrochem. Solid-State Lett., 1, pp.120-122.
50. Milosevic, O., Maric, R., Ohara, S., Fukui, T. (2001): Aerosol Synthesis of Phosphor Particles Based on Eu Activated Gadolinium Oxide Matrices, Ceramic Transactions, 112, Ceramic Processing Sci. VI, pp.101-106.
51. Fukui, T., Ohara, S., Naito, M. and Nogi, K. (2003): Synthesis of NiO-YSZ Composite Particles for an Electrode of Solid Oxide Fuel Cells by Spray Pyrolysis, Powder Technology, 132, pp.52-56.
52. 2-Ag Composite Powder by Spray Pyrolysis", J. Ceram. Soc. Japan, 110, pp.60-62.
53. Cribier, J-F., Ohara, S. and Fukui, T. (2003): Preparation of ZnO based Particles in a Microgravity environment", J. Mater. Sci. Lett., 22, pp.37-40.
54. Milosevic, O., Jordovic, B., Uskokovic, D. (1994): Preparation of fine spherical ZnO powders by an ultrasonic spray pyrolysis method, Materials Letters 19, (3-4) pp.165-170.
55. 3 and ZnO varistor precursor powders by reaction spray pyrolysis, Mat. Sci. Eng. A 168 (2) pp.249-252.
56. Djinovic, V. M., Mancic, L. T., Bogdanovic, G. A., Vulic, P. J., del Rosario, G., Sabo T.J. and Milosevic, O.B. (2005): Aerosol synthesis of pure and Pt-doped ZnO particles using nitrate and pdda-Pt(IV) complex solutions, J. Mater. Res., 20 (1) pp.102-113.
57. Grguric-Sipka, S., Sabo, T., Mancic L. and Milosevic O. (2004): Aerosol synthesis of ruthenium doped ZnO fine particles, J. Aerosol. Sci., 35, pp.S183-184.
58. Janackovic, Dj., Jokanovic, V., Kostic-Gvozdenovic, Lj., Zivkovic, Lj., Uskokovic, D. (1996): Synthesis, Morphology and Formation Mechanism of Mullite Particles Produced by Ultrasonic Spray Pyrolysis", J. Mater. Res., 11 (7) pp.1706-1716.
59. Martin, M.I., Rabanal, M.E., Gomez, L.S., Torralba, J.M., Milosevic, O. (2008): Microstructural and morphological analysis of nanostructured alumina particles synthesized at low temperature via aerosol route, J.Eur.Cer.Soc., 28, pp.2487-2494.
60. Stopic, S., Ilic, I., Nedeljkovic, J., Rakocevic, Z., Uskokovic, D. (1999): Influence of Additives on the Properties of Spherical Ni Particles Prepared by Ultrasonic Spray Pyrolysis, J. Mater. Res., 14, (7) pp.3059-3065.
61. Cerovic, Lj Milonjic, S., Zivkovic, Lj Uskokovic, D. (1996): Synthesis of Spherical b-Silicon Carbide Particles by Ultrasonic Spray Pyrolysis", J. Am. Ceram. Soc., 79, pp.2215-17.
62. 2 powder by Using Quantum Dots as Building Blocks, Nanostruct. Mater., 10, pp.341-348.
63. Mancic, L., Milosevic, O., Marinkovic, B., da Silva Lopez, M.F., Rizzo, F. (2000): Rapid Formation of High Tc Phase in Bi-Pb-Sr-CaCu-O System, Physica C, 341-348, pp.503-504.
64. Mancic, L., Milosevic, O., Labus, N., Ristic, M. (2001): High Tc Superconducting Powders Synthesis from Aerosol", J. Euro. Ceram. Soc., 21, pp.2765-2769.
65. Wang, Y., Milosevic, O., Gómez, L., Rabanal, M.E., Torralba, J.M., Yang, B., Towsend, P. D. (2006): Thermoluminiscence responses from europium doped gadolinium oxide Journal of Physics: Condensed Matter, 18, pp.9257-9272.
66. Rabanal., M.E, Gómez, L.S, Khalifa, A., Torralba, J.M., Mancic. L., Milosevic, O. (2007): Structural properties of europia-doped-gadolinia synthesized through aerosol, Journal of European Ceramic Society 27 (13-15) pp.4325-4328.
67. Gómez, L. S., Rabanal, M.E., Torralba, J. M., Mancic, L., Milosevic, O. (2007): Structural and morphological study of nanoceramics prepared by spray pyrolysis. Ceramic Transactions, Characterization & Control of interfaces for High Quality Advanced materials. The American Ceramic Society, eds. Kevin Ewsuk et. al. Vol. 198, pp.193-197
68. 3+ powders obtained through aerosol synthesis, ICCCI 2009, Kurashiki, September 6-9th, Japan
69. 3+ powders obtained by aerosol synthesis, ICOM 2009, Herceg Novi, 27-30th August, Montenegro.
70. del Rosario, G., Ohara, S., Mancic, L., Milosevic, O. (2004): Characterisation of YAG:Ce powders thermal treated at different temperatures, Appl. Surf. Sci., 238 (1-4) pp.469-474.
71. 12:Ce) particles, Ceramic transactions, Characterisation and Control of Interfaces for High Quality Advanced Materials, eds. K.Ewsuk, K.Nogi, M.Reiterer, A.Tomsia, S.J.Glass, R.Waesche, K.Uematsu, M.Naito, American Ceramic Society, 146, pp.435-441.
72. Mancic, L., del Rosario, G., Marinkovic Stanojevic, Z., Milosevic, O. (2007): Phase evolution in Ce doped yttrium aluminium based particles derived from aerosol, J. Eur. Cer. Soc., 27, pp.4329-4332.
73. 3+ Nanostructures: Comparative Study of the XRPD Micro structural Parameters, Mat. Sci.Forum, 555, pp.395-400.
74. 3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution, J. Eur. Cer. Soc., in press, doi:10.1016/j.jeurceramsoc.2009.05.037.
75. Jugovic, D., Uskokovic, D. (2009): A review of recent developments in the synthesis procedures of lithium iron phosphate powders, Journal of Power Source, 190, pp.538-544.
76. Rack, P. D., Holloway, P. H. (1998): The srtructure, device physics and material properties of thin film electroluminescent displays, Mater. Sci. Eng., 4, pp.171-219.
77. Ropp, R. C. (1991): Luminescence and the Solid State, Elsevier Science Publishers B. V., New York.
78. Maghrabi, M., Townsend, P.D., Vazquez, G. (2001) Low temperature luminescence from the near surface region of. Nd:YAG, J. Phys.: Condens. Matter, 13, pp.2497-515.
79. Kang, Y.C., Lenggoro, I.W., Park, S.B. and Okuyama, K. (2000): YAG-Ce phosphor particles prepared by ultrasonic spray pyrolysis, Mater. Res. Bull., 35, pp.789-798.
80. Zych, E., Brecher, C., Wojtowicz, A.J. and Lingertat, H. (1997): Luminescence properties of Ce-activated YAG optical ceramic scintillator materials, J. Lumin., 75, pp.193-203.
81. 3:Eu phosphor particles with sphericity, submicron size and nonaggregation characterisitics, Journal Phys. Chem. Solids 60, pp.379-384.
82. 3:Eu phosphor particles prepared from spray solution containing boric acid flux and polymer precursor by spray pyrolysis, Opt. Mater., Vol. 28(5) pp.530-535.
83. 3+ ion doping concentration in Gd2O3 fine spherical particles,.J. Alloy Compd., 344, pp.276-279.
84. 3:Eu phosphor particles with cubic and monoclinic phases prepared by high temperature spray pyrolysis (2006): Jap. J. Appl. Phys., 45 (6A) pp.5018-5022.
85. 3 phosphor particles prepared by spray pyrolysis from polymeric precursors, Mater. Res. Bull., 2159, pp.1-10.
86. Gómez, L. S., Sourty, E., Freitag, B., Milosevic, O., Rabanal, M. E., A three dimensional study of Gadolinium oxides doped with europium formed by aerosol method using electron tomography, to be published.
87. 3+ thin-film phosphors, Applied Physics A, 82, (2) pp.S.369-S.372.
88. 3:Eu phosphor particles by flame spray pyrolysis with LiCl flux. Appl. Phys. A., 77, pp.659-663.
89. Bhargave, R. N., Gallagher, D., Welker T. (1994): Doped nanocrystals of semiconductors-a new class of luminescent materials J. Lumin., 61, pp.275.
90. 3+. Journal of Crystal Growth., 284, pp.538-543.
91. 3 nanophosphors, J. Solid State Chem., 171, pp.12-18.
92. 3 doped with rare-earths, Mater. Chem. Phys., 66, 164-177.
93. 3, J. Phys. Chem. Solids, 54, 967-972.
94. 3 as an indication of crystal structure and particle size in nanoparticles synthesized by flame spray pyrolysis Aerosol Sci., 37, 402-412.
95. 3+ ion in oxides, Journal Alloys and Compounds, 228, pp.41-44.
96. 3+-doped yttrium oxide thin films for optical applications, Journal of Luminescence, 87-89, pp.1115-1117.
97. 3 after excitation by ultraviolet photons, Journal of Applied Physics, 91, pp.4053-4064.
98. 3+ Nanopowders, Optical Materials, 30, pp.1023-1027.
99. Gomez, L. S. (2009): Sintesis y caracterization de oxidos nanoestructurados de gadolinio e ytrio dopados con europio obtenidos mediante el metodo de spray pirolisis, PhD Thesis, University Carlos III, Madrid.
100. 12:Ce phosphors via codoping/substitution and their white LED characteristics, Materials Chemistry and Physics 114, pp.665-669.
101. Blasse, G., Bril A. (1967): Investigation of some Ceactivated phosphors, Journal of Chemical Physics, 47(12) pp.5139-5245.
102. Kang, Y.C., Park S.B., and Lenggoro, I.W., Okuyama, K. (1998): Preparation of non aggregation YAG-Ce phosphor particles by spray pyrolysis, Aerosol Sci., 29, pp.S911-S912.
103. Kang, Y.C., Lenggoro, I.W., Park, S.B., Okuyama, K. (2000): YAG:Ce phosphor particles prepared by ultrasonic spray pyrolysis. Mater. Res. Bull., 35, pp.789-798.
104. 3+ Phosphor Particles Prepared by Spray Pyrolysis, Journal of Rare Earths, 23, 4, pp.397-400.
105. 12:Ce phosphor powders prepared by spray pyrolysis from the spray solution with barium fluoride flux, J. Alloys and Compounds 477, pp.776-779.
106. Purwanto, A., Wang, W.N. Ogi, T., Lenggoro, I.W., Tanabe, E., Okuyama, K. (2008): High luminance YAG: Ce nanoparticles prepared from urea-added aqueous precursor by flame-process, Journal of Alloys and Compounds, 463, (1-2) pp.350-357.
107. 3+ phosphor prepared by spray pyrolysis, Journal of Luminescence 126, pp.469-474.
108. 3 by spray pyrolysis of nitrate precursors, Acta Materialia 49 (14) pp.2691-2699.
109. Nyman, M., Caruso J, HampdenSmith, M.J. (1997): Comparison of solid-state and spray pyrolysis synthesis of yttrium aluminate powders, J. Amer. Ceram. Soc. 80 (5) pp.1231-1238.
110. 3+, YUCOMAT, September 8-12 2008, Herceg Novi, Montenegro, p.139.