Integrating life cycle assessment into the conceptual phase of design using a design repository

Journal of Mechanical Design

Volumn 132, Issue 9, 2010, Pages 0910051-09100512

  Bohm, Matt R ^a   Haapala, Karl R ^b   Poppa, Kerry ^b   Stone, Robert B ^b   Tumer, Irem Y ^b  

^a University of Louisville   (United States)

^b Oregon State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENVIRONMENTAL IMPACT; PRODUCT DESIGN;

ASSESSMENT TECHNIQUE; AUTOMATED CONCEPT GENERATIONS; CONCEPTUAL PHASE; DESIGN KNOWLEDGE; DESIGN REPOSITORY; MATERIAL COMPOSITIONS; MATERIALS MANUFACTURING; MODERN DESIGN METHODOLOGY;

LIFE CYCLE;

EID: 77957321146     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4002152     Document Type: Article

References (65)

1. Bryant, C, Bohm, M., Stone, R., and McAdams, D., 2007, "An Interactive Computational Design Tool: A Hybrid of Two Methods," Proceedings of the IDETC/CIE 2007, Las Vegas, NV, Paper No. DETC2007-35583.
2. Bryant, C, McAdams, D., Stone, R., Kurtoglu, T., and Campbell, M., 2005, "A Computational Technique for Concept Generation," Proceedings of IDETC/CIE 2005, Long Beach, CA, Paper No. DETC2005-85323.
3. Kurtoglu, T., and Campbell, M., 2007, "Exploring the Worth Of Automatically Generated Design Alternatives Based on Designer Preferences," International Conference on Engineering Design, Paris, France.
4. Kurtoglu, T., and Campbell, M., 2009, "Automated Synthesis of Electromechanical Design Configurations From Empirical Analysis of Function to Form Mapping," J. Eng. Design, 20(1), pp. 83-104.
5. Bohm, M., Vucovich, J., and Stone, R., 2008, "Using a Design Repository to Drive Concept Generation," ASME J. Comput. Inf. Sci. Eng., 8(1), p. 014502.
6. Bohm, M., Stone, R., and Szykman, S., 2005, "Enhancing Virtual Product Representations for Advanced Design Repository Systems," ASME J. Comput. Inf. Sci. Eng., 5(4), pp. 360-372.
7. Bohm, M., Vuchovich, J., and Stone, R., 2007, "An Open Source Application for Archiving Product Design Information," Proceedings of DETC'07, Las Vegas, NV, Paper No. DETC2007-35401.
8. Bohm, M., Stone, R., Simpson, T., and Steva, E., 2008, "Introduction of a Data Schema: To Support a Design Repository," Comput.-Aided Des., 40(7), pp. 801-811.
9. Bryant, C., McAdams, D., Stone, R., Kurtoglu, T., and Campbell, M., 2006, "A Validation Study of an Automated Concept Generator Design Tool," Proceedings of IDETC/CIE 2006, Philadelphia, PA, Paper No. DETC2006-99489.
10. Bryant, C., Pieper, E., Walther, B., Kurtoglu, T., Stone, R., McAdams, D., and Campbell, M., 2006, "Software Evaluation of an Automated Concept Generator Design Tool," Proceedings of the 2006 ASEE Annual Conference, Chicago, IL, Paper No. ASEE-2006-1758.
11. Szykman, S., Sriram, R., and Regli, W., 2001, "The Role of Knowledge in Next-Generation Product Development Systems," ASME J. Comput. Inf. Sci. Eng., 1(1), pp. 3-11.
12. Szykman, S., Fenves, S., Keirouz, W., and Shooter, S., 2001, "A Foundation for Interoperability in Next-Generation Product Development Systems," Comput.-Aided Des., 33(7), pp. 545-559.
13. Bryant, C., Stone, R., McAdams, D., Kurtoglu, T., and Campbell, M., 2005, "Concept Generation From the Functional Basis of Design," Proceedings of the 2005 International Conference on Engineering Design, ICED 05, Melbourne, Australia.
14. Shooter, S., Simpson, T., Kumara, S., Stone, R., and Terpenny, J., 2005, "Toward a Multi-Agent Information Management Infrastructure for Product Family Planning and Mass Customisation," International Journal for Mass Customisation, 1(1), pp. 134-155.
15. Stone, R., and Wood, K., 2000, "Development of a Functional Basis for Design," ASME J. Mech. Des., 122(4), pp. 359-370.
16. Hirtz, J., Stone, R., McAdams, D., Szykman, S., and Wood, K., 2002, "A Functional Basis for Engineering Design: Reconciling and Evolving Previous Efforts," Res. Eng. Des., 13(2), pp. 65-82.
17. Szykman, S., Racz, J., and Sriram, R., 1999, "The Representation of Function in Computer-Based Design," 1999 Proceedings of the ASME Design Theory and Methodology Conference, Las Vegas, NV, Paper No. DETC99/DTM- 8742.
18. Pahl, G., and Beitz, W., 1996, Engineering Design: A Systematic Approach, Springer, New York.
19. Ulrich, K. T., and Eppinger, S. D., 2004, Product Design and Development, McGraw-Hill/Irwin, Boston, MA.
20. Otto, K., and Wood, K., 1996, "A Reverse Engineering and Redesign Methodology for Product Evolution," Proceedings of the 1996 ASME Design Theory and Methodology Conference, Irvine, CA, Paper No. 96-DETC/DTM-1523.
21. Otto, K., and Wood, K., 1997, Conceptual and Configuration Design of Products and Assemblies (ASM Handbook, Materials Selection and Design), ASM International, Materials Park, OH.
22. Otto, K., and Wood, K., 2001, Product Design: Techniques in Reverse Engineering, Systematic Design, and New Product Development, Prentice-Hall, New York.
23. Hubka, V., and Ernst Eder, W., 1984, Theory ofTechnical Systems, Springer-Verlag, Berlin.
24. Ullman, D. G., 2002, The Mechanical Design Process, 3rd ed., McGraw-Hill, New York.
25. Schmidt, L., and Cagan, J., 1995, "Recursive Annealing: A Computational Model for Machine Design," Res. Eng. Des., 7(2), pp. 102-125.
26. Pimmler, T., and Eppinger, S., 1994, "Integration Analysis of Product Decompositions," 1994 Proceedings of the ASME Design Theory and Methodology Conference, DE-Vol. 68.
27. Shimomura, Y., Tanigawa, S., Takeda, H., Umeda, Y., and Tomiyama, T., 1996, "Functional Evaluation Based on Function Content," Proceedings of the 1996 ASME Design Theory and Methodology Conference, Irvine, CA, Paper No. 96-DETC/DTM-1532.
28. Cutherell, D., 1996, "Product Architecture," The PDMA Handbook of New Product Development, M. Rosenau, Jr., ed., Wiley, New York, Chap. 16.
29. Kurtoglu, T., and Campbell, M., 2009, "An Evaluation Scheme for Assessing the Worth of Automatically Generated Design Alternatives," Res. Eng. Des., 20(1), pp. 59-76.
30. Backer, E., 1995, Computer-Assisted Reasoning in Cluster Analysis, Hemel Mepstead, Prentice-Hall, International, Hertfordshire, UK.
31. Anderberg, M. R., 1973, Cluster Analysis for Applications, Academic, New York.
32. Rickli, J. R., Clarke, A. R., Haapala, K. R., Addo, M., Camelio, J. A., and Sutherland, J. W., 2008, "Reducing the Environmental and Social Impacts of E-Waste Recover Through Technology and Policy," Proceedings of the 2008 Global Conference on Sustainable Product Development and Life Cycle Engineering: Sustainability and Remanufacturing IV, Busan, Korea.
33. Skerlos, S. J., Jorrow, W. R., and Michalek, J. J., 2005, "Sustainable Design and Science: Selected Challenges and Case Studies," Sustainability Science and Engineering, M. Abraham, ed., Elsevier, New York, pp. 477-525.
34. Mihelcic, J. R., Crittenden, J. C., Small, M. J., Shonnard, D. R., Hokanson, D. R., Zhang, Q., Chen, H., Sorby, S. A., James, V. U., Sutherland, J. W., and Schnoor, J. L., 2003, "Sustainability Science and Engineering: The Emergence of a New Metadiscipline," Environ. Sci. Technol., 37(23), pp. 5314-5324.
35. Hauschild, M., Wenzel, H., and Alting, L., 1999, "Life Cycle Design - A Route to the Sustainable Industrial Culture," CIRP Ann., 48(1), pp. 393-396.
36. Giachetti, R. E., 1998, "A Decision Support System for Material and Manufacturing Process Selection," J. Intell. Manuf., 9(3), pp. 265-276.
37. Duflou, J., Dewulf, P. S., and Vanherck, P., 2003, "Pro-Active Life Cycle Engineering Support Tools," CIRP Ann., 52(1), pp. 29-32.
38. Anastas, P. T., and Zimmerman, J. B., 2003, "Design Through the 12 Principles of Green Engineering," Environ. Sci. Technol., 37(5), pp. 94A-101A.
39. Rosselot, K., and Allen, D. T., 2003, "Life Cycle Concepts, Product Stewardship and Green Engineering," Green Engineering: Environmentally Conscious Design of Chemical Processes, D. T. Allen and D. R. Shonnard, eds., Prentice-Hall, Englewood Cliffs, NJ, Chap. 13.
40. Todd, J. A., and Curran, M. A., 1999, Streamlined Life Cycle Assessment: A Final Report From the SETAC North American Streamlined LCA Workgroup, SETAC and SETAC Foundation for Environmental Education, Pensacola, FL.
41. Hendrickson, C. T., Lave, L. B., and Matthews, H. S., 2006, Environmental Life Cycle Assessment of Goods and Services: An Input-Output Approach, Resrouces for the Future, Washington, D.C.
42. Goedkoop, M., and Spriensma, R., 2000, The Eco-Indicator 99: A Damage Oriented Method for Life Cycle Impact Assessment, Methodology Report,3rd ed., Ministry of Housing, Spatial Planning and the Environment, Amersfoort, The Netherlands.
43. Goedkoop, M., Heijungs, R., Huijbregts, M., Schryver, A. D., Struijs, J., and Van Zelm, R., 2009, "M.o.H. Report I: Characterisation, Spatial Planning and the Environment," ReCiPe 2008: A Life Cycle Impact Assessment Method Which Comprises Harmonised Category Indicators at the Midpoint and the Endpoint Level, 1st ed., Ministry of Housing, Spatial Planning and the Environment, The Hague, The Netherlands.
44. Hischier, R., and Weidma, B., 2009, Implementation of Life Cycle Impact Assessment Methods, Final Report, ecoinvent v2.1 No. 3, S.C.f, L.C. Inventories, St. Gallen, Switzerland.
45. Frei, M.,and Zuest, R.,1997,"The Eco-Effective Product Design - The Systematic Inclusing of Environmental Aspects in Defining Requirements," Proceedings of the 1997 Fourth International Seminar on Life Cycle Engineering, Berlin, Germany.
46. Dierolf, D. A., and Richter, K. J., 1989, "Computer Aided Group Problem Solving for Unified Life Cycle Engineering (ULCE)," I.f.D. Analyses, Alexandria, VA, IDA Paper No. P-2149.
47. Eisenhard, J. L., Wallace, D., Sousa, I., Schepper, M., and Rombouts, J., 2000, "Approximate Life-Cycle Assessment in Conceptual Product Design," Proceedings of the 2000 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Baltimore, MD, Paper No. DETC2000/DFM-14026.
48. Borland, N., and Wallace, D., 2000, "Environmentally Conscious Product Design, A Collaborative Internet-Based Modeling Approach," J. Ind. Ecol., 3(2&3), pp. 33-46.
49. Borland, N., Wallace, D., and Kaufmann, H. P., 1998, "Integrating Environmental Impact Assessment Into Product Design," Proceedings of the 1998 ASME Design Engineering and Technical Conference and Computers and Information in Engineering Conference, Atlanta, GA, Paper No. DETC98/ DFM-5730.
50. Kraines, S., Batres, R., Kemper, B., Koyama, M., and Wolowski, V., 2006, "Internet-Based Integrated Environmental Assessment, Part II: Semantic Searching Based on Ontologies and Agent Systems for Knowledge Discovery," J. Ind. Ecol., 10(4), pp. 37-60.
51. Kraines, S., Batres, R., Koyama, M., Wallace, D., and Komiyama, H., 2005, "Internet-Based Integrated Environmental Assessment, Using Ontologies to Share Computational Models," J. Ind. Ecol., 9(3), pp. 31-50.
52. Park, J.-H., and Seo, K.-K., 2006, "A Knowledge-Based Approximate Life Cycle Assessment System for Evaluating Environmental Impacts of Product Design Alternatives in a Collaborative Design Environment," Adv. Eng. Inf., 20, pp. 147-154.
53. Bras, B., and Mistree, F., 1991, "Designing Design Processes in Decision-Based Concurrent Engineering," Journal of Materials & Manufacturing, 100, pp. 451-458.
54. Reap, J., Roman, F., Guldberg, T., and Bras, B., 2006, "Integrated Ecosystem Landscape and Industrial Modeling for Strategic Envronmentally Conscious Process Technology Selection," Proceedings of the 2006 13th CIRP International Conference on Life Cycle Engineering, Leuven.
55. Jeswiet, J., and Hauschild, M., 2008, "Market Forces and the Need to Design for the Environment," International Journal of Sustainable Manufacturing, 1(1/2), pp. 41-57.
56. Choi, J.-K., and Ramani, K., 2009, A Quest for Sustainable Product Design: A Systematic Methodology for Integrated Assessment ofEnvironmentally Benign and Economically Feasible Product Design, VDM, Saarbrucken, Germany.
57. Li, H., Zhang, H.-C., and Carrell, J., 2010, "Use of an Energy-Saving Concept to Assess Life-Cycle Impact in Engineering," International Journal of Sustainable Manufacturing, 2(1), pp. 99-111.
58. Gehin, A., Zwolinski, P., and Brissaud, D., 2007, "Towards the Use of LCA During the Early Design Phase to Define EoL Scenarios," 2007 Proceedings of the 14th CIRP Conference on Life Cycle Engineering - Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses, Tokyo, Japan.
59. Devanathan, S., Koushik, P., Zhao, F., and Ramani, K., 2009, "Integration of Sustainability Into Early Design Through Working Knowledge Model and Visual Tools," Proceedings of the 2009 ASME International Manufacturing Science and Engineering Conference, West Lafayette, IN, Paper No. MSEC2009-84356.
60. Devanathan, S., Ramanujan, D., Bertstein, W., Zhao, F., and Ramani, K., 2010, "Integration of Sustainability Into Early Design Through the Function Impact Matrix," ASME J. Mech. Des., 132(8), p. 081004.
61. Otto, K., and Wood, K. L., 2001, Product Design: Techniques in Reverse Engineering, Systematic Design, and New Product Development, Prentice-Hall, New York.
62. Strawbridge, Z., McAdams, D. A., and Stone, R. B., 2002, "A Computational Approach to Conceptual Design," ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal Canada.
63. Strawbridge, Z., 2001, "Design for Quality: Conceptual and Embodiment Methods," MS thesis, Mechanical Engineering, University of Missouri-Rolla, Rolla, MO.
64. Parashar, T., Grantham Lough, K., and Stone, R., 2009, "The Part Count Tool (PACT) for Concept Selection," Proceedings of the ASME 2009 International Design Engineering and Technical Conferences, San Diego, CA, Paper No. DETC2009-87547.
65. Ashby, M. F., 2009, Materials and the Environment: Eco-Informed Material Choice, Butterworth-Heinemann, Burlington, MA.