Fabrication and characterization of jute reinforced polypropylene composite: Effectiveness of coupling agents

Journal of Composite Materials

Volumn 44, Issue 16, 2010, Pages 1945-1963

  Haydaruzzaman, ^a   Khan, A H ^a   Hossain, M A ^a   Khan, Mubarak A ^b   Khan, Ruhul A ^b   Hakim, M A ^c  

^a JAHANGIRNAGAR UNIVERSITY   (Bangladesh)

^b INSTITUTE OF NUCLEAR SCIENCE AND TECHNOLOGY   (Bangladesh)

^c ATOMIC ENERGY CENTER   (Bangladesh)

Author keywords

composite; HEMA; jute fabrics; mechanical and electrical properties; polypropylene; starch

Indexed keywords

2-HYDROXYETHYL METHACRYLATE; BENDING MODULI; COMPOSITE; FIBER CONTENTS; HEMA; JUTE FABRICS; MATRIX; MECHANICAL AND ELECTRICAL PROPERTIES; PHOTO-INITIATOR; POLYPROPYLENE COMPOSITE; SCANNING ELECTRON MICROSCOPIC; STARCH SOLUTIONS; TENSILE MODULI; WATER UPTAKE;

BENDING STRENGTH; COMPRESSION MOLDING; COUPLING AGENTS; DIELECTRIC PROPERTIES OF SOLIDS; ELASTIC MODULI; ELECTRIC PROPERTIES; FABRICS; IMPACT STRENGTH; METHANOL; POLYPROPYLENES; PROPYLENE; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; STARCH; TENSILE STRENGTH; THERMAL AGING; THERMOPLASTICS; ULTRAVIOLET RADIATION;

MECHANICAL PROPERTIES;

EID: 77957162193     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998309356604     Document Type: Article

References (44)

1. Cao, Y., Shibata, S. and Fukumoto, I. (2006). Mechanical Properties of Biodegradable Composites Reinforced With Bagasse Fiber Before and After Alkali Treatments, Composites: Part A, 37: 423-429. (Pubitemid 43243826)
2. Ben Brahim, S. and Ben Cheikh, R. (2007). Influence of Fiber Orientation and Volume Fraction on the Tensile Properties of Unidirectional Alfa-Polyester Composite, Composites Science and Technology, 67: 140-147.
3. Mirbagheri, J., Tajvidi, M. and John, C. (2007). Tensile Properties of Wood Flour/Kenaf Fiber Polypropylene Hybrid Composites, Journal of Applied Polymer Science, 105: 3054-3059. (Pubitemid 47168997)
4. Rahman, S.M.M.A., Mustafa, I. and Khan, M.A. (2008). Jute Reinforced Polypropylene Composite: Effect of Surface Pretreatment by Photocuring with Acrylic Monomers, Journal of Reinforced Plastics and Campsites, 28 (14). 1733-1745.
5. Nangia, S. and Biswas, S. (2000). Jute Composite: Technology & Business Opportunities, In: Proceedings of International Conference on Advances in Composites, Banglore, India, 24-26 August, pp. 295-305.
6. Kalaprasad, G., Pradeep, P., Mathew, G., Pavithran, C. and Thomas, S. (2000). Thermal Conductivity Analyses of Low Density Polyethylene Composites Reinforced with Sisal, Glass and Intemately Mixed Sisal Glass Fibers, Composites Science and Technology, 60: 2967-2977.
7. Munikenche Gowda, T., Naidu, A.C.B. and Chhaya, R. (1999). Some Mechanical Properties of Untreated Jute Fabric Reinforced Polyester Composites, Composites: Part A., 30: 277-284.
8. Karim, H.G. (2003). Handbook of Polypropylene and Polypropylene Composites, Marcel Dekker, New York.
9. Razera, I.A.T. and Frollini, E. (2004). Composites Based on Jute Fibers and Phenolic Matrices: Properties of Fibers and Composites, Journal of Applied Polymer Science, 91: 1077-1085.
10. Mannan, Kh.M. and Talukder, M.A. (1997). Characterization of Raw Delignified and Bleached Jute Fibers Study of Absorption of Moisture and some Mechanical Properties, Polymer, 38 (10). 2493-2500.
11. Bonfim, R.F.S. (1968). Fibras Sintéticas e o Futuro da Economia da Juta, 2nd edn, p. 43, Sudam, Brasillia, Brazil.
12. Nassar, N.L. (ed.) (1980). Bibliografia da Juta (Corchorus capsularis L., C. olitorius L.), Embrapa / DID, Brasilia, Brazil.
13. Homma, A.K.O. (ed.) (1998). Amaznia: Meio Ambiente e Desenvolvimento Agricola, p. 412, Embrapa-SPI, Embrapa-CPATU, Brasilia, Brazil.
14. Wambua, P., Ivan, J. and Verport, I. (2003). Natural Fibers: Can They Replace Glass in Fiber Reinforced Plastics, Composites Science and technology, 63: 1259-1264.
15. Gassan, J. and Bledzki, A.K. (1999). Possibilities for Improving the Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibers, Composites Science and technology, 59: 303-1309.
16. Van de Weyenberga, I., Ivensa, J., De costerb, A., Kinob, B., Bactensb, E. and Verposta, I. (2003). Influence of Processing and Chemical Treatment of Flax Fibers on Their Composites, Composites Science and technology, 63: 1241-1246.
17. Saheb, D.N. and Jog, J.P. (1999). Natural Fiber Polymer Composites: A Review, Advances in Polymer Technology, 18 (4). 351-363.
18. Aziz, S.H. and Ansell, M.P. (2004). The Effect of Alkalization and Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fiber Composites: Part 2 Cashew Nut Shell Liquid Matrix, Composites Science and Technology, 64: 1231-1238.
19. Ray, D., Sarkar, B.K., Rana, A.K. and Bose, N.R. (2001). Effect of Alkali Treated Jute Fibers on Composites Properties, Bull Materials Science, 24 (2). 129-135.
20. Netravali, A.N. (2004). Advanced Natural Fibers, Plastic and Composites Recent Advances, Kluwer Academic Publishers, New York.
21. Valadez-Gonzaleza, A., Cervantes-Uca, J.M., Olayob, R. and Herrera-Francoa, P.J. (1999). Effect of Fiber Surface Treatment on the Fiber-Matrix Bond Strength of Natural Fiber Reinforced Composites, Composites: Part B, 30: 309-320.
22. Luo, S. and Netravali, A.N. (1999). Interfacial and Mechanical Properties of Environment Friendly Green Composites Made from Pineapple Fibers and Poly(Hydroxybutyrate-Co-Valerate) Resin, Journal of Materials Science, 20: 367-378.
23. Morye, S.S. and Wool, R.P. (2005). Mechanical Properties of Glass/Flax Hybrid Composites Based on a Novel Modified Soybean Oil Matrix Material, Polymer Composites, 26: 408-416.
24. Khan, M.A., Ali, K.M.I., Hinrichsen, G. and Koop, C. (1999). Study of Tensile Properties of Biopol-Jute Composites, Polymer Plastics Technology and Engineering, 38 (1). 99-112.
25. Mohanty, A.K., Khan, M.A. and Herichsen, G. (2000). Effect of Chemical Modification on the Performance of Biodegradable Jute Yarn-Biopol Composites, Journal of Materials Science, 35: 2589-2595.
26. Khan, M.A., Koop, C. and Hinrichsen, G. (2001). Effect of Vinyl and Silicon Monomer on Mechanical and Biodegradable Properties of Biodegradable Jute-Biopol Composite, Journal of Reinforced Plastics and Composites, 20: 1414-1429.
27. Khan, M.A. and Drzal, L.T. (2000). Influence of Silane of Different Functionalities on Interfacial Bond on Jute-Polycarbonate Composites, In: Third International Conference on Wood and Natural Fiber Composites Symposium, Kessel, Germany, 19-20 September, pp. 5.1-5.6.
28. Khan, M.A., Hassan, M.M. and Drzal, L.T. (2005). Effect of 2-Hydroxyethyl Methacrylate (HEMA) on the Mechanical and Thermal Properties of Jute-Polycarbonate Composite, Composites: Part A, 36: 71-81.
29. Khan, M.A., Haque, M., Kafi, A.A., Alam, M.N. and Abedin, M.Z. (2006). Jute Reinforced Polymer Composite by Gamma Radiation: Effect of Surface Treatment with UV Radiation, Polymer Plastics Technology and Engineering, 45 (4). 607-613.
30. Ramaraj, B. (2007). Crosslinked Poly (vinyl alcohol) and Starch Composite Films: Study of their Physico-mechanical, Thermal, and Swelling Properties, Journal of Applied Polymer Science, 103: 1127-1132.
31. Ramaraj, B. (2007). Crosslinked Poly (vinyl alcohol) and Starch Composite Films II. Physicomechanical, Thermal Properties and Swelling Studies, Journal of Applied Polymer Science, 103: 909-916.
32. Rosa, M.F., Chiou, B.-S., Eliton, S. and Imam, S.H. (2009). Biodegradable Composites Based on Starch/EVOH/Glycerol Blends and Coconut Fibers, Journal of Applied Polymer Science, 111: 612-618.
33. Mathew Aji, P., Thielemans, W. and Dufresne, A. (2008). Mechanical Properties of NanoComposites from Sorbital Plasticized Starch and Tunicin Whiskers, Journal of Applied Polymer Science, 109: 4065-4074.
34. Cao, X., Chen, Y., Chang, P.R., Stumborg, M. and Huneault, M.A. (2008). Green Composites Reinforced with Nanocrystals in Plasticized Starch, Journal of Applied Polymer Science, 109: 3804-3810.
35. Kafi, A.A., Abedin, M.Z., Beg, M.D.H., Pickering, K.L. and Khan, M.A. (2006). Study on the Mechanical Properties of Jute/Glass Fiber-Reinforced Unsaturated Polyester Hybrid Composite: Effect of Surface Modification by Ultraviolet Radiation, Journal of Reinforced Plastics and Composites, 25 (6). 575-588.
36. Khan, M.A., Shehrzade, S., Chowdhury, A.S.M. and Rahman, M.M. (2002). Effect of Pretreatment with UV Radiation on Physical and Mechanical Properties of Photocured Jute Yarn with 1, 6-Hexanediol Diacrylate (HDDA), Journal of Polymers and the Environment, 9: 3-11.
37. Khan, M.A., Khan, R.A., Haydaruzzaman, Hossain, A. and Khan, A.H. (2008). Effect of Gamma Radiation on the Physico-Mechanical and Electrical Properties of Jute Fiber-Reinforced Polypropylene Composites, Journal of Reinforced Plastics and Composites, 28 (13). 1651-1660.
38. Mohanty, A.K., Khan, M.A. and Hinrichsen, G. (2000). Surface Modification of Jute and Influence on Performance of Biodegradable Jute-Fabric/Biopol Composites, Composite Science and Technology, 60: 1115-1124.
39. Khan, M.A., Das, L.R., Khan, A.H., Ahmed, F. and Badier Rahman, S.M. (2002). Study on the Mechanical and Dielectric Properties of Photocured Jute Fabrics with 2-Hydroxyethyl Methacrylate, Journal of Applied Polymer Science, 89: 655-661.
40. Shehrzade, S. and Khan, M.A. (2003). Effect of Pretreatment with Gamma Radiation on the Performance of Photocured Jute Yarn with 1,6-Hexanedio Diacrylate (HDDA), Polymer Plastic Technology and Engineering, 42 (5). 795-810.
41. Khan, M.A., Taslima, R. and Mustafa, A.I. (2005). Role of Urea on the Physico-Mechanical and Degradable Properties of Mercerized and Acid Hydrolyzed Coir(Cocos Nucifera) Fibers Photocured With 1,6-Hexanediol Diacylate, Polymer Plastic Technology and Engineering, 44: 1003-1023.
42. Uddin, M.K., Khan, M.A. and Ali, K.M.I. (1997). Degradable Jute Plastic Composites, Polymer degradation & Stability, 55: 1-7.
43. Rowell, R.M., Han, J.S. and Rowell, J.S. (2000). Characterization and Factors Effecting Fiber Properties, In: Frollini, E., Leao, A.L.L. and Mattoso, H.C. (eds), Natural Polymers and Agrofibers Composites, pp. 115-134, Sao Carios, Brazil.
44. Ghare, B.D., Khan, A.H. and Narayanan, S.P. (1982). Dielectric and Pyro-electric Properties on Sintered Discs of Sodium Meta-vanadate, In: Proceedings of International Seminar on Capacitors, Bombay, India, 9-10 December., pp. 1-21.