Chapter 2 The measurement of color

AZimuth

Volumn 1, Issue C, 1998, Pages 31-96

  Marcus, Robert T ^a  

^a D and S Plastics International Mansfield   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77957051962     PISSN: 13876783     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S1387-6783(98)80005-6     Document Type: Chapter

References (134)

1. Billmeyer Jr. F.W., and Saltzman M. Principles of Color Technology. 2nd edn (1981), Wiley, New York
2. CIE, 1986a, Publication 15.2, Colorimetry. 2nd edn (1986), Commission International de l'Eclairage (CIE), Central Bureau of the CIE, Vienna
3. Field G.G. Color and Its Reproduction (1988), Graphics Arts Technical Foundation, 4615 Forbes Avenue, Pittsburgh, PA 15213
4. Hunt R.W.G. Measuring Colour. 2nd edn (1991), Ellis Horwood, Chichester, West Sussex, England
5. Hunter R.S., and Harold R.W. The Measurement of Appearance. 2nd edn (1987), Wiley, New York
6. In: McDonald R. (Ed). Colour Physics for Industry. 2nd edn (1997), Society of Dyers and Colourists, P.O. Box 244, Perkin House, 82 Grattan Road, Bradford, West Yorkshire BDI 2JB, England
7. Wyszecki G., and Stiles W.S. Color Science, Concepts and Methods, Quantitative Data and Formulae. 2nd edn (1982), Wiley, New York
8. Color Research and Application (Wiley, 605 Third Ave., New York, NY 10158).
9. AATCC, 0001, AATCC Test Method 173 CMC: Calculation of small color differences for acceptability. AATCC Technical Manual/1993 (American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215).
10. AATCC, 0002, AATCC Test Method 153 color measurement of textiles: Instrumental. AATCC Technical Manual/1993 (American Association of Textile Chemists and Colorists P.O. Box 12215, Research Triangle Park, NC 27709-2215).
11. Adebayo O., and Rigg B. Relative tolerances in the CMC colour-difference formula for paint samples. J. Oil Chemists and Colourists Association 11 (1986) 302-309
12. Allen, E. and B. Yuhas, Setting up acceptability tolerances: A case study. Color Research and Application 9, 37-48.
13. American National Standard. American National Standard CGATS.5 Graphic technology-spectral measurement and colorimetric computation for graphic arts images (1899), NPES The Association for Suppliers of Printing and Publishing Technologies, 1899 Preston White Drive, Reston, VA 22091-4367
14. ASTM, 0001, ASTM E 1499 Standard guide to the selection, evaluation and training of observers. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
15. ASTM, 0002, ASTM E 308 Standard test method for computing the colors of objects by using the CIE system. Annual Book of ASTM Standard (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
16. ASTM, 0003, ASTM D 4086 Standard practice for visual evaluation of metamerism. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
17. ASTM, 0004, ASTM D 3134 Standard practice for establishing color and gloss tolerances. Annual Book of ASTM Standard (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
18. ASTM, 0005, ASTM D 1535 Standard test method for specifying color by the Munsell system. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
19. ASTM, 0006. ASTM E 1360 Standard practice for specifying color by using the Optical Society of American uniform color scales system. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
20. ASTM, 0007, ASTM E 1541 Standard practice for specifying and matching color using the Colorcurve system. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor, Drive, West Conshohocken, PA 19428).
21. ASTM, 0008, ASTM D 1729 Standard practice for visual evaluation of color differences of opaque materials. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
22. ASTM, 0009, ASTM D 2616 Standard test method for evaluation of visual color difference with a gray scale. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
23. ASTM, 0010, ASTM D 4449 Standard test method for visual evaluation of gloss differences between surfaces of similar appearance. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
24. ASTM, 0011, ASTM D 3928 Standard test method for evaluation of gloss or sheen uniformity. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
25. ASTM, 0012, ASTM D 2244 Standard test method for calculation of color differences from instrumentally measured color coordinates. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA, 19428).
26. ASTM, 0013, ASTM E 313 Standard test method for indexes of whiteness and yellowness of near-white, opaque materials. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
27. ASTM, 0014, ASTM D 1925 Standard test method for yellowness index of plastics. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
28. ASTM, 0015, ASTM D 5531 Standard guide for preparation, maintenance, and distribution of physical product standards for color and geometric appearance of coatings. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
29. ASTM, 0016, ASTM E 179 Standard guide for selection of geometric conditions for measurement of reflection and transmission properties of materials. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
30. ASTM, 0017, ASTM E 429 Standard test method for measurement and calculation of reflecting characteristics of metallic surfaces using integrating sphere instruments. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
31. ASTM, 0018, ASTM E 1164 Standard practice for obtaining spectrophotometric data for object-color evaluation. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
32. ASTM, 0019, ASTM E 259 Standard practice for preparation of pressed powder white reflectance factor transfer standards for hemispherical geometry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
33. ASTM, 0020, ASTM E 805 Standard practice for identification of instrumental methods of color or color-difference measurement of materials. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
34. ASTM, 0021, ASTM E 1331 Standard test method for reflectance factor and color by spectrophotometry using hemispherical geometry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
35. ASTM, 0022, ASTM E 1349 Standard test method for reflectance factor and color by spectrophotometry using bidirectional geometry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
36. ASTM, 0023, ASTM E 1347 Standard test method for color and color-difference measurement by tristimulus (filter) colorimetry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshocken, PA 19428).
37. ASTM, 0024, Draft document "Standard guide for reflectance and transmittance measurement of translucent materials" (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
38. ASTM, 0025, ASTM E 991 Standard practice for color measurement of fluorescent specimens. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
39. ASTM, 0026, ASTM E 1247 Standard test method for identifying fluorescence in object-color specimens by spectrophotometry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
40. ASTM, 0027, ASTM D 3925 Standard pratice for sampling liquid paints and related pigmented coatings. Annual Book of ASTM Standards (American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428).
41. ASTM, 0028, ASTM D 3964 Standard practice for selection of coating specimens for appearance measurements. Annual Book of ASTM Standards, American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
42. ASTM, 0029, ASTM D 823 Standard practices for producing films of uniform thickness of paint, varnish, and related products on test panels. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
43. ASTM, 0030, ASTM E 1345 Standard practice for reducing the effect of variability of color measurement by use of multiple measurements. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
44. ASTM, 0031, ASTM E 1348 Standard test method for transmittance and color by spectrophotometry using hemispherical geometry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
45. ASTM, 0032, ASTM E 450 Standard test method for measurement of color of low-colored clear liquids using the Hunterlab color difference meter. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
46. ASTM, 0033, ASTM D 1003 Standard test method for haze and luminous transmittance of transparent plastics. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
47. ASTM, 0034, ASTM E 1341 Standard practice for obtaining spectroradiometric data from radiant sources for colorimetry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
48. ASTM, 0035, ASTM E 1336 Standard test method for obtaining colorimetric data from a video display unit by spectroradiometry. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
49. ASTM, 0036, ASTM E 1455 Standard practice for obtaining colorimetric data from a visual display unit using tristimulus colorimeters. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
50. ASTM, 0037, ASTM F 923 Standard guide to properties of high visibility materials used to improve individual safety. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
51. ASTM, 0038, ASTM E 808 Standard practice for describing retroreflection. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
52. ASTM, 0039, ASTM E 809 Standard practice for measuring photometric characteristics of retroreflectors. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
53. ASTM, 0040, ASTM E 810 Standard test method for coefficient of retroreflection of retroreflective sheeting. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
54. ASTM, 0041, ASTM D 4061 Standard test method for retroreflection of horizontal coatings. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
55. ASTM, 0042, ASTM E 811 Standard practice for measuring colorimetric characteristics of retroreflectors under nighttime conditions. Annual Book of ASTM Standards (American Society for Testing and Materials, 100, Bar Harbor Drive, West Conshohocken, PA 19428).
56. Billmeyer Jr. F.W. Survey of color order systems. Color Research and Application 12 (1987) 173
57. Billmeyer Jr. F.W., and Alessi P.J. Assessment of color-measuring instruments. Color Research and Application 6 (1981) 195-202
58. Billmeyer Jr. F.W., and Fairman H.S. CIE method for calculating tristimulus values. Color Research and Application 12 (1987) 27-36
59. Billmeyer Jr. F.W., and Marcus R.T. Effect of illuminating and viewing geometry on the color coordinates of samples with various surface textures. Applied Optics 8 (1969) 763-768
60. Billmeyer Jr. F.W., and Saltzman M. Principles of Color Technology. 2nd edn (1981), Wiley, New York
61. British Standard. BS6923:1988 Standard method for calculation of small colour differences (1988), British Standards Institution, 2 Park Street, London W1A 2BS
62. Budde W. The gloss trap in diffuse reflectance measurements. Color Research and Application 5 (1980) 73-75
63. Available from Dr. D.C. Rich, Secretary of the Inter-Society Color Council, Datacolor International, 5 Princess Road, Lawrenceville NJ 08648. Carter E.C., Billmeyer F.W., and Rich Jr. D.C. Guide to material standards and their use in color measurement. ISCC Technical Report 89-1 (2000)
64. Chickering K.D. Optimization of the MacAdam-modified 1965 Friele color-difference formula. J. Opt. Soc. Am. 57 (1967) 537-541
65. Chickering K.D. FMC color-difference formulas: clarification concerning usage. J. Opt. Soc. Am. 61 (1971) 118-122
66. CIE. Recommendations on uniform color spaces-color-difference equations. Supplement 2 to CIE Publication 15 (1971) (1978), Psychometric Color Terms (Commission International de l'Eclairage (CIE), Central Bureau of the CIE, Vienna). These recommendations have since been incorporated into CIE Publication 15.2 (see CIE, 1986a).
67. Available from USNC/CIE Publications c/o TLA-Lighting Consultants, Inc., 72 Loring Avenue, Salem, MA 01970. CIE. A method for assessing the quality of daylight simulators for colorimetry. Publication 51 (1981), Commission International de l'Eclairage (CIE), Central Bureau of the CIE, Vienna
68. Available from USNC/CIE Publications, c/o TLA-Lighting Consultants, Inc., 72 Loring Avenue, Salem, MA 01970. CIE. Publication 15.2, Colorimetry. 2nd edn (1986), Commission International de l'Eclairage (CIE), Central Bureau of the CIE, Vienna
69. Available from USNC/CIE Publications, c/o TLA-Lighting Consultants, Inc., 72 Loring Avenue, Salem, MA 01970. CIE. Publication x007, Proceedings of the CIE Symposium on Advanced Colorimetry (1986), Commission International de l'Eclairage (CIE), Central Bureau of the CIE, Vienna
70. Available from USNC/CIE Publications, c/o TLA-Lighting Consultants, Inc., 72 Loring Avenue, Salem, MA 01970. CIE. Technical Report 116, Industrial colour-difference evaluation, Commission International de l'Eclairage (CIE) (1995), Central Bureau of the CIE, Vienna
71. Clark F.J.J., McDonald R., and Rigg B. Modification to the JPC 79 colour-difference formula. J. Soc. Dyers and Colorists 100 (1984) 128-132
72. Clarke F.J.J. Ceramic colour standards. Die Farbe 20 (1971) 299-306
73. Compton J.A. The thermochromic properties of the ceramic colour standards. Color Research and Application 9 (1984) 15-22
74. Connelly Sr. R.L. Preparation and mounting textile samples for color measurement. In: Celikiz G., and Kuehni R.G. (Eds). Color Technology in the Textile Industry (1983), American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709
75. CTS, 0001, Report No. 87 of the color and appearance collaborative reference program, Collaborative Testing Services, Herndon, VA 22070.
76. Ehr S.M. Color Tolerancing: The Practical Way. presented at the Regional Technical Conference of the Society of Plastics Engineers, Color Tolerances: Measuring Up to Today's Standards. Cherry Hill, NJ, September 14-16 (1992)
77. Ehr S.M. Color tolerancing: A practical case. Plastics Compounding November/December (1993) 48-51
78. Erb W. Gonioreflectometry-instrumentation and data. presented at the 1987 Inter-Society Color Council Williamsburg Conference, Appearance. Williamsburg, Virginia, February 8-11 (1987)
79. Fairchild M.D. The CIE Standard Observer: Mandatory retirement at age 65?. Color Research and Application 18 (1993) 129-134
80. Fairman H.S. A standards program for color control. Color Research and Application 6 (1981) 5-6
81. Fairman H.S. The calculation of weight factors for tristimulus integration. Color Research and Application 10 (1985) 199-203
82. Field G.G. Color and Its Reproduction (1988), Graphics Arts Technical Foundation, 4615 Forbes Avenue, Pittsburgh, PA 15213
83. Foster Jr. W.H., Gans R., Stearns E.I., and Stearns R.E. Weights for calculation of tristimulus values from sixteen reflectance values. Color Engineering 8 3 (1970) 35-47
84. Grum F., Fairchild M.D., and Berns R.S. Goniospectrophotometric characteristics of common transfer standards with respect to the cie normal/45 geometry. presented at the 1987 Inter-Society Color Council Williamsburg Conference, Appearance. Williamsburg, Virginia, February 8-11 (1987)
85. Gundlach D., and Terstiege H. Problems in measurement of fluorescent materials. Color Research and Application 19 (1994) 427-436
86. Hrd A., and Sivik L. NCS-Natural Color System: A Swedish standard for color notation. Color Research and Application 6 (1981) 129-138
87. translated by L.M. Hurvich and D. Jameson. Hering E. Outlines of a Theory of the Light Sense, 1874 (1964), Harvard University Press, Cambridge, MA
88. Hunt R.W.G. Measuring Colour. 2nd edn (1991), Ellis Horwood, Chichester, West Sussex, England
89. Hunter R.S., and Harold R.W. The Measurement of Appearance. 2nd edn (1987), Wiley, New York
90. Judd D.B. Ideal Color Space. Color Eng. 8 2 (1970) 36-53
91. Kubelka P. New contributions to the optics of intensely light-scattering materials. Part I. J. Opt. Soc. Am. 38 (1948) 448-457
92. Kubelka P. New contributions to the optics of intensely light-scattering materials. Part II: Non-homogenous Layers. J. Opt. Soc. Am. 44 (1954) 330-335
93. Kuehni R.G. Computer Colorant Formulation (1975), D.C. Heath, Lexington, MA
94. Liebeknecht A.L. CMC after one year in production: How well is it working?. presented at the Regional Technical Conference of the Society of Plastics Engineers, Color Tolerances: Measuring Up to Today's Standards. Cherry Hill, NJ, September 14-16 (1992)
95. Mabon T.J. Color Measurement of Plastics: Which Geometry Is Best?. presented at the Regional Technical Conference of the Society of Plastics Engineers, Color Tolerances: Measuring Up to Today's Standards. Cherry Hill, NJ, September 14-16 (1992)
96. MacAdam D.L. Uniform color scales. J. Opt. Soc. Am. 64 (1974) 1691-1702
97. Marcus R.T. Long-term repeatability of color-measuring instrumentation: Storing numerical standards. Color Research and Application 3 (1978) 29-33
98. In: McDonald R. (Ed). Colour Physics for Industry (1993), The Society of Dyers and Colourists, P.O. Box 244, Perkin House, 82 Grattan Road, Bradford BD1 2JB
99. In: McDonald R. (Ed). Colour Physics for Industry. 2nd edn (1997), Society of Dyers and Colourists, P.O. Box 244, Perkin House, 82 Grattan Road, Bradford, West Yorkshire BDI 2JB, England
100. McKinnon R.A. Methods of measuring the colour of opaque fluorescent materials. Rev. Prog. Coloration 17 (1987) 56-60
101. 11th edn (edited and rearranged) (Munsell Color Company, Baltimore, 1946). Now available from the Munsell Color Group, Macbeth Division of Kollmorgen Instruments Corporation, New Windsor, New York. Munsell A.H. A Color Notation. 1st edn (1905), Geo. H. Ellis Co., Boston
102. preliminary Charts A and B were published in 1910. Munsell A.H. Atlas of the Munsell Color System (1915), Wadsworth-Howland, Malden, MA
103. Now available from the Munsell Color Group, Macbeth Division of Kollmorgen Instruments Corporation, New Windsor, New York. Munsell A.H. Munsell Book of Color (1929), Munsell Color Company, Baltimore
104. Nemcsics A. The Coloroid color system. Color Research and Application 5 (1980) 113-120
105. Newhall S.M., Nickerson D., and Judd D.B. Final report of the O.S.A. subcommittee on the spacing of the Munsell Colors. J. Opt. Soc. Am. 33 (1943) 385-418
106. Nickerson D. Uniform color scales samples: A unique set. Color Research and Application 6 (1981) 7-33
107. Nickerson D., and Newhall S.M. A psychological color solid. J. Opt. Soc. Am. 33 (1943) 419-422
108. North A.D., and Fairchild M.D. Measuring color-matching functions. Part I. Color Research and Application 18 (1993) 155-162
109. North A.D., and Fairchild M.D. Measuring color-matching functions. Part II. New data for assessing observer metamerism. Color Research and Application 18 (1993) 163-170
110. Park J. Instrumental Colour Formulation: A Practical Guide (1993), The Society of Dyers and Colourists, P.O. Box 244, Perkin House, 82 Grattan Road, Bradford BD1 2JB
111. Pierce, P.E., and R.T. Marcus, 0001, Color and Appearance (Federation Series on Coatings Technology, Federation of Societies for Coatings Technology, 492 Norristown Road, Blue Bell, PA 19422)
112. Rich D.C. The effect of measuring geometry on computer color matching. Color Research and Application 13 (1988) 113-118
113. Rich D.C. Colorimetric repeatability and reproductibility of chroma-sensor spectrocolorimeters. Die Farbe 37 (1990) 247-261
114. Richter M., and Witt K. The story of the DIN color system. Color Research and Application 11 (1986) 138
115. SAE, 0001, SAE J1545 Recommended practice for instrumental color difference measurement for exterior finishes, textiles, and colored trim (Society of Automotive Engineers, 3001 W. Big Beaver, Troy, MI 48084).
116. Schmelzer H. Influence of the design of instruments on the accuracy of color-difference and color-matching calculations. J. Coating Technology 58 739 (1986) 53-59
117. Spooner D.L. Lateral diffusion errors caused by layered structure of graphics arts products. presented at Annual TAGA meeting. Mineapolis, MN, April 26. TAGA Proceedings (1993)
118. ® system. Color Research and Application 17 (1992) 263-272
119. Stanziola R.H., Hemmendinger H., and Momiroff B. The spectro sensor: A new generation spectrophotometer. Color Research and Application 4 (1979) 157-163
120. Stearns E.I. The determination of weights for use in calculating tristimulus values. Color Research and Application 6 (1981) 210-212
121. Stearns E.I. Calculation of tristimulus values and weights with the revised CIE recommendations. Textile Chemist and Colorist 17 8 (1985) 162/53-168/59
122. Sterns E.I., and Prescott W.B. Measurement of translucent cloth samples. In: Celikiz G., and Kuehni R.G. (Eds). Color Technology in the Textile Industry (1983)
123. Strocka D. Are intervals of 20 nm sufficient for industrial colour measurement?. In: Hunt R.W.G. (Ed). presented at the 2nd AIC Congress "Colour 73", York, England, July, 1973. Long abstract. Colour 73 (1973), Halsted Press, New York 453-456
124. Swedish Standard, 0001, Swedish Standard SS 01 91 00 D, Colour Notation System, Swedish Standards Commission.
125. Swedish S. SS 01 91 02 Colour Atlas (1979), Swedish Standrds Institution, SIS, Stockholm
126. Thornton W.A. Toward a more accurate and extensible colorimetry. Part I. Introduction. The visual colorimeter-spectroradiometer. Experimental results. Color Research and Application 17 (1993) 79-122
127. Thornton W.A. Toward a more accurate and extensible colorimetry. Part II. Discussion. Color Research and Application 17 (1993) 162-186
128. Thornton W.A. Toward a more accurate and extensible colorimetry. Part III. Discussion (continued). Color Research and Application 17 (1993) 240-262
129. Thornton W.A. Response. Color Research and Application 18 (1993) 134-136
130. Vance L.C. Statistical determination of numerical color tolerances. Modern Paint and Coatings November (1983) 49-51
131. West B. The Application of CMC Color Difference to Lot Acceptance of Colorants. presented at the Regional Technical Conference of the Society of Plastics Engineers, Color Tolerances: Measuring Up to Today's Standards. Cherry Hill, NJ, September 14-16 (1992)
132. Wilson Ch., and Sterns E.I. The spectrophotometric reflectance measurement of small samples. In: Celikiz G., and Kuehni R.G. (Eds). Color Technology in the Textile Industry (1983), American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709
133. Wyszecki G., and Stiles W.S. Color Science, Concepts and Methods, Quantitative Data and Formulae. 2nd edn (1982), Wiley, New York
134. Zwinkels J.C. Errors in colorimetry caused by the measuring instrument. Textile Chemist and Colorist 21 2 (1989) 23-29