Approximation-assisted optimization for novel compact heat exchanger designs

HVAC and R Research

Volumn 16, Issue 5, 2010, Pages 707-728

  Abdelaziz, Omar ^a   Aute, Vikrant ^b   Azarm, Shapour ^c   Radermacher, Reinhard ^b  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF MARYLAND   (United States)

^c UNIVERSITY OF MARYLAND   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77956909254     PISSN: 10789669     EISSN: None     Source Type: Journal    
DOI: 10.1080/10789669.2010.10390929     Document Type: Article

References (56)

1. Abdelaziz, O., 2009. Development of multi-scale, multi-physics, analysis capability and its application to novel heat exchanger design and optimization, PhD dissertation College Park, MD:Department of Mechanical Engineering, University of Maryland. http://hdl.handle.net/1903/9566
2. th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. September10–12, Victoria, British Columbia, Canada.
3. Celata, G. P., 2004. "Single Phase Fluid Flow,". ”. In Heat Transfer and Fluid Flow in Microchannels Edited by:Celata, G. P., Guo, Z.-Y., Li, Z.-X., and Zummo, G., Wallingford, U. K.:Begell House, Inc.
4. Cressie, N. A. C., 1993. Statistics for Spatial Data New York:J. Wiley.
5. De Losier, C. R., Subramanian, S., Ponyavin, V., Chen, Y., Hechanova, A. E., and Peterson, P. F., 2007. The parametric study of an innovative offset strip-fin heat exchanger. Journal of Heat Transfer, 129:1453–58.
6. Deb, K., 2001. Multi-Objective Optimization Using Evolutionary Algorithms New York:John Wiley & Sons.
7. Fabbri, G., 1997. A genetic algorithm for fin profile optimization. International Journal of Heat and Mass Transfer, 40:2165–72.
8. Fluent. 2007. User’s Guide Lebanon, NH:Fluent Inc.
9. Foli, K., Okabe, T., Olhofer, M., Jin, Y., and Sendhoff, B., 2006. Optimization of micro heat exchanger:CFD, analytical approach and multi-objective evolutionary algorithms. International Journal of Heat and Mass Transfer, 49:1090–99.
10. st Aerospace Sciences Meeting and Exhibit. January6–9, Reno, NV.
11. Gruss, J., Bouzon, C., and Thonon, B., 2005. Extruded microchannel-structured heat exchangers. Heat Transfer Engineering, 26:56–63.
12. Guessous, L., and Maddipatla, S., Improving radiator design through shape optimization. ASME International Mechanical Engineering Congress and Exposition. November17–22, New Orleans, LA.
13. th Conference on Winter simulation. Monterey, CA. pp. 882–88.
14. Harris, C., Despa, M., and Kelly, K., 2000. Design and fabrication of a cross flow micro heat exchanger. Journal of Microelectromechanical Systems, 9:502–508.
15. Harris, C., Kelly, K., Wang, T., McCandless, A., and Motakef, S., 2002. Fabrication, modeling, and testing of micro-cross-flow heat exchangers. Journal of Microelectromechanical Systems, 11:726–35.
16. Hilbert, R., Janiga, G., Baron, R., and Thevenin, D., 2006. Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms. International Journal of Heat and Mass Transfer, 49:2567–77.
17. Huang, L., and Aute, V., 2008. “ RE:State of the art heat exchanger design. ”. In Email to the author
18. Jiang, H. B., Aute, V., and Radermacher, R., 2006. CoilDesigner:a general-purpose simulation and design tool for air-to-refrigerant heat exchangers. International Journal of Refrigeration, 29:601–10.
19. Jing, W., Jianbing, W., Liuyang, G., Suili, W., and Dayong, H., CFD optimization application on air-side plate fins of condenser coil of gravity-assisted heat pipe. Proceedings of the ASME Summer Heat Transfer Conference, HT 2005. San Francisco, CA. pp. 779–85.
20. Kandlikar, S. G., 2006. "Single-phase liquid in minichannels and microchannels,". ”. In Heat Transfer and Fluid Flow in Minichannels and Microchannels Edited by:Kandlikar, S. G., Garimella, S., Li, D., Colin, S., and King, M. R., Oxford, U. K.:Elsevier ltd.
21. Kasagi, N., Shikazono, N., Suzuki, Y., and Oku, T., Assessment of high-performance compact micro bare-tube heat exchangers for electronics equipment cooling. First International Symposium on Process Intensification and Miniaturization. August18–21. University of Newcastle upon Tyne.
22. Kasagi, N., Suzuki, Y., Shikazono, N., and Oku, T., Optimal design and assessment of high performance micro bare-tube heat exchangers. Proceedings on the Fourth International Conference on Compact Heat Exchangers and Enhancement Technologies for the Process Industries. Crete. pp. 241–46.
23. Kelly, K. W., Harris, C. R., and Despa, M. S., Crossflow micro heat exchanger. USA patent application 09/501215. 2002.
24. Lee, K.-S., Kim, W.-S., and Si, J.-M., 2001. Optimal shape and arrangement of staggered pins in the channel of a plate heat exchanger. International Journal of Heat and Mass Transfer, 44:3223–31.
25. th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. September6–8, Portsmouth, VA.
26. Li, Z., Davidson, J., and Mantell, S., 2004. Heat transfer enhancement using shaped polymer tubes:Fin analysis. ASME Journal of Heat Transfer, 126:211–18.
27. Li, Z., Davidson, J., and Mantell, S., 2006. Numerical simulation of flow field and heat transfer of streamlined cylinders in cross flow. ASME Journal of Heat Transfer, 128:564–70.
28. Lophaven, S. N., Nielsen, H. B., and Sondergaard, J., 2002. Aspects of the MATLAB toolbox DACE Kongens Lyngby, Denmark:Informatics and Mathematical Modeling. Technical University of Denmark.
29. Martin, J. D., and Simpson, T. W., 2005. Use of kriging models to approximate deterministic computer models. AIAA Journal, 43:853–63.
30. Mathworks. 2007. MATLAB® Natick, MA:The MathWorks, Inc.
31. McKay, M. D., Beckman, R. J., and Conover, W. J., 1979. A comparison of three methods for selecting values of input variables in the analysis of response from a computer code. Technometrics, 21:239–45.
32. Micheli, D., Pediroda, V., and Pieri, S., 2008. Multi-objective optimization of a microturbine compact recuperator. Journal of Engineering for Gas Turbines and Power, 130 (3):032301
33. Nobile, E., Pinto, F., and Rizzetto, G., Multiobjective shape optimization of convective wavy channels. 2005 ASME Summer Heat Transfer Conference. July17–22, San Francisco, CA. HT 2005
34. Nobile, E., Pinto, F., and Rizzetto, G., 2006. Geometric parameterization and multiobjective shape optimization of convective periodic channels. Numerical Heat Transfer, Part B:Fundamentals, 50:425–53.
35. O'Brien, J. E., Sohal, M. S., and Wallstedt, P. C., 2004. Local heat transfer and pressure drop for finned-tube heat exchangers using oval tubes and vortex generators. Journal of Heat Transfer, 126:826–35.
36. Palm, B., and Peng, X.-F., 2004. "Single-phase convective heat transfer,". ”. In Heat Transfer and Fluid Flow in Microchannels Edited by:Celata, G. P., Guo, Z.-Y., Li, Z.-X., and Zummo, G., Wallingford, U. K.:Begell House, Inc.
37. Park, K., and Moon, S., 2005. Optimal design of heat exchangers using the progressive quadratic response surface model. International Journal of Heat and Mass Transfer, 48:2126–39.
38. Park, K., Oh, P.-K., and Lim, H.-J., 2006. The application of the CFD and Kriging method to an optimization of heat sink. International Journal of Heat and Mass Transfer, 49:3439–47.
39. Pettersen, J., Hafner, A., Skaugen, G., and Rekstad, H., 1998. Development of compact heat exchangers for CO2 air-conditioning systems. International Journal of Refrigeration, 21:180–93.
40. Queipo, N., Devarakonda, R., and Humpherey, J. A. C., 1994. Genetic algorithms for thermosciences research:Application to the optimized cooling of electronic components. International Journal of Heat and Mass Transfer, 37:893–908.
41. Queipo, N. V., Arevalo, C. J., and Pintos, S., 2005. The integration of design of experiments, surrogate modeling and optimization for thermoscience research. Engineering with Computers, 20:309–15.
42. Rohsenow, W. M., and Choi, H. Y., 1961. Heat, Mass, and Momentum Transfer Englewood Cliffs, NJ:Prentice-Hall.
43. Romero-Mendez, R., Sen, M., Yang, K. T., and McClain, R., 2000. Effect of fin spacing on convection in a plate fin and tube heat exchanger. International Journal of Heat and Mass Transfer, 43:39–51.
44. Saji, N., Nagai, S., Tsuchiya, K., Asakura, H., and Obata, M., 2001. Development of a compact laminar flow heat exchanger with stainless steel micro-tubes. Physica C, 354:148–51.
45. Shah, R. K., and London, A. L., 1978. Laminar flow forced convection in ducts:a source book for compact heat exchanger analytical data New York, NY:Academic Press.
46. Shah, R. K., and Sekulic, D. P., 2003. Fundamentals of Heat Exchanger Design Hoboken, NJ:John Wiley & Sons.
47. Shen, P., Aliabadi, S. K., and Abedi, J., A review of single-phase liquid flow and heat transfer in microchannels. Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004). Rochester, NY. pp. 213–20.
48. Shewry, M. C., and Wynn, H. P., 1987. Maximum entropy sampling. Journal of Applied Statistics, 14:165–170.
49. Simpson, T. W., Peplinski, J. D., Koch, P. N., and Allen, J. K., 2001. Metamodels for computer-based engineering design:Survey and recommendations. Engineering with Computers, 17:129–50.
50. rd International Conference on Microchannels and Minichannels, ICMM2005. Toronto, ON. pp. 667–78.
51. Sunden, B., 2007. Computational fluid dynamics in research and design of heat exchangers. Heat Transfer Engineering, 28:898–910.
52. th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Portsmouth, VA. pp. 647–57.
53. Wang, G. G., and Shan, S., 2007. Review of metamodeling techniques in support of engineering design optimization. ASME Journal of Mechanical Design, 129:370–80.
54. Webb, R., and Kim, N. H., 2005. Principles of Enhanced Heat Transfer, 2d ed. New York:Taylor & Francis Group.
55. Westphalen, D., Roth, K. W., and Brodrick, J., 2006. Heat transfer enhancement. ASHRAE Journal, 48:68–71.
56. Wu, J. M., and Tao, W. Q., 2007. Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle. Applied Thermal Engineering, 27:2609–17.