Material Failure by Void Growth to Coalescence

Advances in Applied Mechanics

Volumn 27, Issue C, 1989, Pages 83-151

  Tvergaard, Viggo ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77956849479     PISSN: 00652156     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2156(08)70195-9     Document Type: Article

References (104)

1. Anderson, H., Analysis of a model for void growth and coalescence ahead of a moving crack tip. J. Mech. Phys. Solids 25 (1977), 217–233.
2. Aoki, S., Kishimoto, K., Takeya, A., Sakata, M., Effects of microvoids on crack blunting and initiation in ductile materials. Int. J. Fracture 24 (1984), 267–278.
3. Aravas, N., McMeeking, R.M., Microvoid growth and failure in the ligament between a hole and a blunt crack. Int. J. Fracture 29 (1985), 21–38.
4. Argon, A.S., Mechanisms and mechanics of fracture in creeping alloys, 1982, Recent Advances in Creep and FractJe Press, Swansea, U.K.
5. Becker, R., Needleman, A., Effect of yield surface curvature on necking and failure in porous plastic solids. J. Appl. Mech. 108 (1986), 491–499.
6. Becker, R., Needleman, A., Richmond, O., Tvergaard, V., Void growth and failure in notched bars, 1987, Brown University, Division of Engineering.
7. Becker, R., Needleman, A., Suresh, S., Tvergaard, V., Vasudevan, A.K., An analysis of ductile failure by grain boundary void growth, 1987, Brown University, Division of Engineering.
8. Berg, C.A., Plastic dilatation and void interaction. Kanninen, M.F., et al. (eds.) Inelastic Behaviour of Solids, 1970, McGraw-Hill, 171–210.
9. Bishop, J.F.W., Hill, R., A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. Phil. Mag. 42 (1951), 414–427.
10. Brown, L.M., Embury, J.D., The initiation and growth of voids at second phase particles. Proc. 3rd Int. Conf. on Strength of Metals and Alloys, 1973, Inst. of Metals, London, 164–169.
11. Budiansky, B., Remarks on theories of solid and structural mechanics. Lavrent'ev, M.A., et al. (eds.) Problems of Hydrodynamics and Continuum Mechanics, 1969, SIAM, Philadelphia.
12. Budiansky, B., Hutchinson, J.W., Slutsky, S., Void growth and collapse in viscous solids. Hopkins, H.G., Sewell, M.J., (eds.) Mechanics of Solids, The Rodney Hill 60th Anniversary Volume, 1982, Pergamon Press, 13–45.
13. Chu, C.C., Needleman, A., Void nucleation effects in biaxially stretched sheets. J. Eng. Materials Technol. 102 (1980), 249–256.
14. Cialone, H., Asaro, R.J., Hydrogen assisted fracture of spheroidized plain carbon steels. Met. Trans. 12A (1980), 1373–1387.
15. Cocks, A.C.F., Ashby, M.F., On creep fracture by void growth. Prog. Materiuls Science 27 (1982), 189–244.
16. Cocks, A.C.F., Leckie, F.A., Creep constitutive equations for damaged materials. Adv. Appl. Mech. 25 (1987), 239–294.
17. Cottrell, A.H., Theory of brittle fracture in steel and similar metals. Transactions AIME 212 (1958), 192–203.
18. Cox, T.B., Low, J.R., An investigation of the plastic fracture of AISI 4340 and 18 nickel-200 grade maraging steels. Mer. Trans. 5 (1974), 1457–1470.
19. Dafalias, Y.F., Corotational rates for kinematic hardening at large plastic deformations. J. Appl. Mech. 50 (1983), 561–565.
20. Doraivelu, S.M., Gegel, H.L., Gunaselsera, J.S., Malas, J.C., Morgan, J.T., Thomas, J.F., A new yield function for compressible P/M materials. Int. J. Mech. Sci. 26 (1984), 527–535.
21. Dyson, B.F., Constraints on diffusional cavity growth rates. Metal Science 10 (1976), 349–353.
22. Dyson, B.F., Continuous cavity nucleation and creep fracture. Scripta Metall. 17 (1983), 31–37.
23. Frost, H.J., Ashby, M.F., Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, 1982, Pergamon Press, Oxford.
24. Goods, S.H., Brown, L.M., The nucleation of cavities by plastic deformation. Acta Metall. 27 (1979), 1–15.
25. Green, A.E., Zerna, W., Theoretical Elasticity, 1968, Oxford University Press, Oxford.
26. Guennouni, T., Francois, D., Constitutive equations for rigid plastic or viscoplastic materials containing voids. Fatigue Fract. Engng. Mater. Struct. 10 (1987), 399–418.
27. Gurson, A.L., Continuum theory of ductile rupture by void nucleation and growth–I. Yield criteria and flow rules for porous ductile media. J. Engng. Materials Technol. 99 (1977), 2–15.
28. Gurson, A.L., Porous rigid-plastic materials containing rigid inclusions–Yield function, plastic potential, and void nucleation. Taplin, D.M.R., (eds.) Proc. Int. Conf. Fracture, 2A, 1977, Pergamon Press, 357–364.
29. Hadamard, J., Lecons sur la propagation des ondes et les Âqations de I'hydrodynamique, 1903, Libraire Scientifique A., Hermann, Paris.
30. Hahn, G.T., The influence of microstructure on brittle fracture toughness. Met. Trans. 15A (1984), 947–959.
31. Hahn, G.T., Rosenfield, A.R., Metallurgical factors affecting fracture toughness of aluminum alloys. Met. Trans. 6A (1975), 653–668.
32. Hancock, J.W., Plasticity of porous metals. Baker, T.N., (eds.) Yield, Flow and Fracture of Polycrystals, 1982, Appl. Sci. Publishers, 69–79.
33. Hancock, J.W., Brown, D.K., On the role of strain and stress state in ductile failure. J. Mech. Phys. Solids 31 (1983), 1–24.
34. Hancock, J.W., Mackenzie, A.C., On the mechanisms of ductile failure in high strength steels subjected to multiaxial stress-states. J. Mech. Phys. Solids 24 (1976), 147–169.
35. He, M.Y., Hutchinson, J.W., The penny-shaped crack and the plane strain crack in an infinite body of power-law material. J. Appl. Mech. 48 (1981), 830–840.
36. Hill, R., Acceleration waves in solids. J. Mech. Phys. Solids 10 (1962), 1–16.
37. Hull, D., Rimmer, D.E., The growth of grain-boundary voids under stress. Phil. Mag. 4 (1959), 673–687.
38. Hutchinson, J.W., Finite strain analysis of elastic-plastic solids and structures. Hartung, R.F., (eds.) Numerical Solution of Nonlinear Structural Problems, 1973, ASME, New York, 17.
39. Hutchinson, J.W., Constitutive behaviour and crack tip fields for materials undergoing creep-constrained grain boundary cavitation. Acta Metall. 31 (1983), 1079–1088.
40. Hutchinson, J.W., Tvergaard, V., Surface instabilities on statically strained plastic solids. Int. J. Mech. Sci. 22 (1980), 339–354.
41. Hutchinson, J.W., Tvergaard, V., Shear band formation in plane strain. Int. J. Solids Structures. 17 (1981), 451–470.
42. Hutchinson, J.W., Tvergaard, V., Softening due to void nucleation in metals. Harvard University, 1987, Division of Appl. Sci. Mech-99.
43. Koplik, J., Needleman, A., Void growth and coalescence in porous plastic solids, 1987, Brown University Division of Engineering.
44. Lee, E.H., Mallett, R.L., Wertheimer, T.B., Stress analysis for kinematic hardening in finite-deformation plasticity. J. Appl. Mech. 50 (1983), 554–560.
45. Li, F.Z., Needleman, A., Shih, C.F., Creep crack growth by grain boundary cavitation: Crack tip fields and crack growth rates under transient conditions, 1988, Brown University Report.
46. Magnusen, P.E., Koss, D.A., Dubensky, E.M., Ductile fracture and random vs. regular hole/void arrays, 1987, Office of Naval Research N00014–86-K-0381, Techn. Rep. No. 5.
47. Marciniak, K., Kuczynski, K., Limit strains in the process of stretch forming sheet metals. Int. J. Mech. Sci. 9 (1967), 609–620.
48. McClintock, F.A., A criterion for ductile fracture by growth of holes. J. Appl. Mech. 35 (1968), 363–371.
49. McMeeking, R.M., Finite deformation analysis of crack tip opening in elastic-plastic materials and implications for fracture initiation. J. Mech. Phys. Solid 25 (1977), 357–381.
50. Mear, M.E., Hutchinson, J.W., Influence of yield surface curvature on flow localization in dilatant plasticity. Mech. Materials 4 (1985), 395–407.
51. Moussy, F., Les differentes echelles du developpement de l'endommagement dans del aciers. Influence sur la localization de la deformation a l'echelle microscopique. Salencon, J., (eds.) Proc. Int. Symp. on Plastic Instability; Considere Memorial, 1985, Presses Ponts et Chaussâs, 263–272.
52. Needleman, A., Void growth in an elastic-plastic medium. J. Appl. Mech. 41 (1972), 964–970.
53. Needleman, A., A numerical study of void nucleation at carbides, 1987, Brown University Division of Engineering.
54. Needleman, A., Rice, J.R., Limits to ductility set by plastic flow localization. Koistinen, D.P., et al. (eds.) Mechanics of Sheet Metal Forming, 1978, Plenum Publishing, 237–267.
55. Needleman, A., Rice, J.R., Plastic creep flow effects in the diffusive cavitation of grain boundaries. Acta Metall. 28 (1980), 1315–1332.
56. Needleman, A., Tvergaard, V., An analysis of ductile rupture in notched bars. J. Mech. Phys. Solids 32 (1984), 461–490.
57. Needleman, A., Tvergaard, V., Finite element analysis of localization in plasticity. Oden, J.T., Carey, G.F., (eds.) Finite Elements, Special Problems in Solid Mechanics, V, 1984, Prentice-Hall, 94–157.
58. Needleman, A., Tvergaard, V., Limits to formability in rate-sensitive metal sheets. Carlsson, J., Ohlson, N.G., (eds.) Mechanical Behavior of Materials–IV, 1984, Pergamon Press, Oxford, 51–65.
59. Needleman, A., Tvergaard, V., An analysis of ductile rupture modes at a crack tip. J. Mech. Phys. Solids 35 (1987), 151–183.
60. Nemat-Nasser, S., Taya, M., Model studies of ductile fracture. Continuum Models of Discrete Systems, 1977, University of Waterloo Press, 387–405.
61. Nemat-Nasser, S., Sumi, Y., Keer, L.M., Unstable growth of tension cracks in brittle solids: Stable and unstable bifurcations, snap-through, and imperfection sensitivity. Int. J. Solids Structures 16 (1980), 1017–1035.
62. Norris, D.M., Computer simulation of the Charpy V-notch toughness test. Engineering Frucrure Mechanics 11 (1979), 261–274.
63. Nutt, S.R., Needleman, A., Void nucleation at fiber ends in Al-SiC composites. Scripta Metallurgica 21 (1987), 705–710.
64. Pan, J., Saje, M., Needleman, A., Localization of deformation in rate sensitive porous plastic solids. Int. J. Fracture 21 (1983), 261–278.
65. Paris, P.C., Tada, H., Zahoor, A., Emst, H., Initial experimental investigation of tearing instability theory. Elastic-Plastic Fracture, 1979, ASTM STP 668.
66. Peirce, D., Shih, C.F., Needleman, A., A tangent modulus method for rate dependent solids. Compur. Struct. 18 (1984), 875–887.
67. Petch, N.J., The ductile-brittle transition in the fracture of α-iron. I. Phil. Mag. 3 (1958), 1089–1097.
68. Puttick, D.E., Ductile fracture in metals. Phil. Mag. 4 (1960), 964–969.
69. Rice, J.R., Elastic-plastic fracture mechanics. Erdogan, F., (eds.) The Mechanics of Fracture, 1976, ASME AMD 19, 23–53.
70. Rice, J.R., The localization of plastic deformation. Koiter, W.T., (eds.) Theoretical and Appl. Mech, 1977, North-Holland, 207–220.
71. Rice, J.R., Constraints on the diffusive cavitation of isolated grain boundary facets in creeping polycrystals. Acta Metall. 29 (1981), 675–681.
72. Rice, J.R., Johnson, M.A., The role of large crack tip geometry changes in plane strain fracture. Kanninen, M.F., et al. (eds.) Inelastic Behaviour of Solids, 1970, McGraw-Hill, New York, 641–672.
73. Rice, J.R., Tracey, D.M., On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17 (1969), 201–217.
74. Riedel, H., Fracture at High Temperatures, 1986, Springer-Verlag, Berlin.
75. Ritchie, R.O., Knott, J.F., Rice, J.R., On the relationship between critical tensile stress and fracture toughness in mild steel. J. Mech. Phys. Solids 21 (1973), 395–410.
76. Rolfe, S.T., Barsom, J.M., Fracture and Fatigue Control in Structures–Applications of Fracture Mechanics, 1977, Prentice-Hall, Englewood Cliffs, New Jersey.
77. Rudnicki, J.W., Rice, J.R., Conditions for the localization of deformation in pressure-sensitive dilatant materials. J. Mech. Phys. Solids 23 (1975), 371–394.
78. Saje, M., Pan, J., Needleman, A., Void nucleation effects on shear localization in porous plastic solids. Int. J. Fracture 19 (1982), 163–182.
79. Sham, T.-L., Needleman, A., Effects of triaxial stressing on creep cavitation of grain boundaries. Acta Metall. 31 (1983), 919–926.
80. Shima, S., Oyane, M., Plasticity theory for porous metals. Int. J. Mech. Sci. 18 (1976), 285–291.
81. Smith, E., Cleavage fracture in mild steel. Int. J. Fracture Mechanics 4 (1968), 131–145.
82. Speich, G.R., Spitzig, W.A., Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels. Met. Trans. 13A (1982), 2239–2258.
83. Stone, R.H., Psioda, J.A., Discussion of Metallurgical factors affecting fracture toughness of aluminum alloys. Met. Trans. 6A (1975), 668–670.
84. Tvergaard, V., Effect of kinematic hardening on localized necking in biaxially stretched sheets. Int. J. Mech. Sci. 20 (1978), 651–658.
85. Tvergaard, V., Influence of voids on shear band instabilities under plane strain conditions. Int. J. Fracture 17 (1981), 389–407.
86. Tvergaard, V., On localization in ductile materials containing spherical voids. Int. J. Fracture 18 (1982), 237–252.
87. Tvergaard, V., Ductile fracture by cavity nucleation between larger voids. J. Mech. Phys. Solids 30 (1982), 265–286.
88. Tvergaard, V., Material failure by void coalescence in localized shear bands. Int. J. Solids Structures 18 (1982), 659–672.
89. Tvergaard, V., Influence of void nucleation on ductile shear fracture at a free surface. J. Mech. Phys. Solids 30 (1982), 399–425.
90. Tvergaard, V., On the creep constrained ditksive cavitation of grain boundary facets. J. Mech. Phys. Solids 32 (1984), 373–393.
91. Tvergaard, V., Constitutive relations for creep in polycrystals with grain boundary cavitation. Acta Metall. 32 (1984), 1977–1990.
92. Tvergaard, V., Effect of grain boundary sliding on creep constrained diffusive cavitation. J. Mech. Phys. Solids 33 (1985), 447–469.
93. Tvergaard, V., Analysis of creep crack growth by grain boundary cavitation. Int. J. Fracture 31 (1986), 183–209.
94. Tvergaard, V., Effect of yield surface curvature and void nucleation on plastic flow localization. J. Mech. Phys. Solids 35 (1987), 43–60.
95. Tvergaard, V., Ductile shear fracture at the surface of a bent specimen. Mech. Materials 6 (1987), 53–69.
96. Tvergaard, V., Effect of anisotropic hardening on ductile failure of a material containing two size-scales of particles, 1987, Technical University of Denmark DCAMM Report No. 354.
97. Tvergaard, V., 3D-analysis of localization failure in a ductile material containing two size-scales of spherical particles, 1987, Technical University of Denmark DCAMM Report No. 365.
98. Tvergaard, V., Effect of microstructure degradation on creep crack growth. Dept. of Solid Mech., 1988, Technical University of Denmark.
99. Tvergaard, V., Needleman, A., Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32 (1984), 157–169.
100. Tvergaard, V., Needleman, A., Effect of material rate sensitivity on failure modes in the Charpy V-notch test. J. Mech. Phys. Solids 34 (1986), 213–241.
101. Tvergaard, V., Needleman, A., Temperature and rate dependence of Charpy V-notch energies for a high nitrogen steel, 1987, Brown University Division of Engineering.
102. Tvergaard, V., Needleman, A., Lo, K.K., Flow localization in the plane strain tensile test. J. Mech. Phys. Solids 29 (1981), 115–142.
103. Yamamoto, H., Conditions for shear localization in the ductile fracture of void-containing materials. Int. J. Fracture 14 (1978), 347–365.
104. Ziegler, H., A modification of Prager's hardening rule. Quart. Appl. Math. 17 (1959), 55–65.