Stabilisation of reactive subgrades by cementitious slurry injection - A review

Australian Geomechanics Journal

Volumn 39, Issue 4, 2004, Pages 81-94

  Wilkinson, A ^a   Haque, A ^a   Kodikara, J ^a   Christie, D ^b   Adamson, J ^c  

^a MONASH UNIVERSITY   (Australia)

^b RailCorp   (Australia)

^c Works Infrastructure Pty Ltd   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

COST EFFECTIVENESS; DIRECT INJECTION; STABILIZATION;

CEMENTITIOUS ADDITIVES; COST-EFFECTIVE METHODS; SLURRY DESIGNS; SLURRY INJECTION; SLURRY MATERIALS; SOIL PARTICLES; STRENGTH AND STIFFNESS; TECHNICAL PROCESS;

SOILS;

EID: 77956832289     PISSN: 08189110     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (51)

1. Ahnberg, H., Johansson, S.-E., Pihl, H. and Carlsson, T. (2003), Stabilising effects of different binders in some Swedish soils, Ground Improvement, 7(1), pp. 9-23.
2. Akbulut, S. and Saglamer, A. (2003). The effects of silica fume in cement grouting, Ground Improvement, 7(1), pp. 37-44.
3. Alfaro, M. C. and Wong, R. C. K. (2001). Laboratory studies on fracturing of low-permeability soils, Canadian Geotechnical Journal, 38, pp. 303-315.
4. Anderson, J. (2004). "An $11.4 Billion Boost for Australia's Roads and Railways", Budget Media Releases, TRS1/Budget, www.dotars.gov. au/dept/budget/0405/trs1-budget.aspx.
5. Anderson, K. H., Rawlings, C. G., Lunne, T. A., and By, T. H. (1994). Estimation of hydraulic fracture pressure in clay, Canadian Geotechnical Journal, Vol. 31 pp. 817-828.
6. ASCE Committee on Grouting (1995). Verification of Geotechnical Grouting - Committee Report, ASCE Geotechnical Special Publication, 57, pp. 1-77.
7. Au, S. K. A., Soga, K., Jafari, M. R., Bolton, M. D. and Komiya, K. (2003). Factors Affecting Long-Term Efficiency of Compensation Grouting in Clays, Journal of Geotechnical and Geoenvironmental Engineering, March, pp. 254-262.
8. Bjerrum, L., Nash, J. K. T. L., Kennard, R. M. and Gibson, R. E. (1972). Hydraulic fracturing in field permeability testing, Geotechnique, 22 No. 2, pp 319-332.
9. Bolton, M. D. and Whittlement, R. W. (1999). A non-linear elastic/perfectly plastic analysis for plane strain undrained expansion tests, Technical note, Geotechnique 49, No. 1, pp. 133-141.
10. Borden, R. H. and Baez, J. I. (1991). Testing Techniques for Evaluating the Shear Strength of Lime/Fly-ash Slurry Stabilized Soil, Geotechnical Testing Journal, pp 247-256.
11. Bouchelaghem, F. and Almonsni, A. (2003). Experimental Determination of the Longitudinal Dispersivity During the Injection of a Micro-Cement Grout in a One-Dimensional Soil Column, Transport in Porous Media 52, pp. 67-94.
12. Bouchelaghem, F. (2002). Two large-scale injection experiments, and assessment of the advection-dispersion-filtration model, Geotechnique 52, No. 9, 667-682.
13. Brandl, H. (2001). Geotechnics of railtrack structures, 'Geotechnics for roads, rail tracks and earth structures', International society for soil mechanics and geotechnical engineering, A. A. Balkema Publishers.
14. Broek, D. (1986). Elementary Engineering Fracture Mechanics, 4th Ed., Kluwer Academic Publishers.
15. Brooker, E. W., and Ireland, H. O. (1965). Earth pressure at rest related to stress history, Canadian Geotechnical Journal, 2:29-38.
16. Carter, J. P. (1986). Cavity expansion in cohesive frictional soils, Geotechnique, 36(3):349-358.
17. Chew, S. H., Kamruzzaman, A. H. M. and Lee, F. H. (2004). Physico-Chemical and Engineering Behavior of Cement Treated Clays, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, July, Pp. 696-706.
18. Cokca, E. (2001). Use of Class C Fly-ashes for the Stabilization of an Expansive Soil, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127(7), 568-573.
19. Dahlhaus, P. G. and O'Rourke, M. (1992). The Newer Volcanics, Engineering Geology of Melbourne, Peck, W. A., Neilson, J. L., Olds, R. J. and Seddon, K. D. (eds.), Balkema, Rotterdam, pp. 205-212.
20. De Paoli, B., Bosco, B., Granata, R. and Bruce, D. A. (1992). Fundamental Observations on Cement Based Grouts (1): Traditional Materials, 'Grouting, Soil Improvement and Geosynthetics', ASCE Geotechnical Special Publication No. 30, pp 474-485.
21. Flintoff, T. (1992). Engineering properties of Newer Volcanics, Engineering Geology of Melbourne, Peck, W. A., Neilson, J. L., Olds, R. J. and Seddon, K. D. (eds.), Balkema, Rotterdam, pp. 213-222.
22. Foun, D. and Martin, M. (2002). Development of the QR Ballast Specification, CORE2002 Conference on Railway Engineering, Wollongong, Railway Technical Society of Australasia.
23. Gause, C and Bruce, D. A. (1997). Control of Fluid Properties of Particulate Grouts: Part 1 - General Concepts, Grouting: Compaction, Remediation and Testing, ASCE Special Publication 66, pp. 213-229.
24. Gerke, H. H and Van Genuchten, M. T. (1993). A Dual-Porosity Model for Simulating the Preferential Movement of Water and Solutes in Structured Porous Media, Water Resources Research, Vol. 29, No. 2 Pp. 305-319.
25. Hayashi, S. and Shahu, J. T. (2000). Mud pumping problem in tunnels on erosive soil deposits, Geotechnique 50, No. 4, 393-408.
26. Herzog, A. and Mitchell, J. K. (1962). Reactions Accompanying Stabilization of Clay with Cement, Highway Research Record 36, National Research Council, Washington, D. C, pp. 146-171
27. Hu, B. X. and Huang, H. (2002). Stochastic Analysis of Reactive Solute Transport in Heterogeneous, Fractured Porous Media: A Dual-Permeability Approach, Transport in Porous Media 48, pp. 1-39.
28. Jaworski, G. W., Duncan, J. M. and Seed, H. B. (1981). Laboratory study of hydraulic fracturing. Journal of Geotechnical Division, ASCE, 107 (GT6) pp. 713-732.
29. Kayes, I., Nissen, D. and Adamson, J. (2000). Stabilisation of Rail Track Formation and Embankments, CORE2000 conference, RTSA, Glenelg, S. A.
30. Lee, A. R. (1974). Blastfurnace and Steel Slag, Edward Arnold, London.
31. Li, D. and Selig, E. (1995). Evaluation of railway subgrade problems, Transportation Research Record, Rep. No. 1489, Transp. Res. Board, Nat. Res. Council, Washington D. C.
32. Mitchell, J. K. (1976). Fundamentals of Soil Behavior, John Wiley & Sons.
33. Mitchell, J. K. and Dermatas, D. (1990). Clay Soil Heave Caused by Lime-Sulfate Reactions, Innovations and Uses for Lime, ASTM Special Publication No. 1135, pp 41-64.
34. Madshus, C. (2001). Modelling, monitoring and controlling the behaviour of embankments under high speed train loads, Geotechnics for roads, rail tracks and Earth Structures, International society for Soil Mechanics and Geotechnical Engineering, Balkema Publishers.
35. Massarch, R. (1978). New aspects of soil fracturing in clay, Journal of Geotechnical Engineering, ASCE, 104:1109-1123.
36. Mori, A., Tamura, M., Shibata, H. and Hayashi, H. (1992). Some Factors Related to Injected Shape in Grouting, Grouting Soil Improvement and Geosynthetics, ASCE Geotechnical Special Publication, 30, pp 313-324.
37. Mori, A., Tamura, M. and Fukui, Y. (1990). Fracturing pressure of soil ground by viscous materials, Soils and Foundations, Vol 30, No. 3, pp. 130-136.
38. Mori, A. and Tamura, M. (1987). Hydrofracturing Pressure of Cohesive Soils, Japanese Society of Soil Mechanics and Foundation Engineering, Soils and Foundations, Vol. 27, No1, pp 14-22.
39. Murdoch, L. C. (2002). Mechanical Analysis of Idealized shallow Hydraulic Fracture, Journal of Geotechnical and Geoenvironmental Engineering, pp. 488-945.
40. Murdoch, L. C (1992). Hydraulic fracturing of soil during laboratory experiments Part 2. Propagation, Geotechnique 43, No. 2, 267-276.
41. Murdoch, L. C (1992). Hydraulic fracturing of soil during laboratory experiments Part 3. Theoretical analysis, Geotechnique 43, No. 2, 277-287.
42. Nontananandh, S. and Kamon, M. (1996). Hydration mechanisms of fly-ash stabilized by lime, Proceedings of the 2nd International Congress for soil mechanics and Foundation Engineering and the Japanese Geotechnical Society, Osaka, Japan, 857-863.
43. Puppala, A. J., Wattanasanticharoen, E. and Punthutaecha, K. (2003). Experimental evaluations of stabilisation methods for sulphate-rich expansive soils, Ground Improvement 7, No. 1, 25-35.
44. Selig, E. T. and Waters, J. M. (1994). Track Geotechnology and Substructure Management, Thomas Telford.
45. Soga, K., Au, S. K. A., Jafari, M. R. and Bolton, M. D. (2004). Laboratory investigation of multiple grout injections into clay, Geotechnique 54, No. 2, pp 81-90.
46. Tarumi, H. and Sekine, E. (1993). Study of Grouting Patterns Based on Pressure-Speed Relation and Pressure-Time Charts, Quarterly Report of the Railway Technical Research Institute, Japan, Vol. 34(4), pp. 255-262.
47. Vallejo, L. E. (1994). Application of Fracture Mechanics to soils: an Overview, Fracture Mechanics Applied to Geotechnical Engineering, ASCE Special Publication 43, pp. 1-19.
48. Vesic, A. S. (1972). Expansion of cavities in infinite soil mass, Soil Mechanics and Foundations, ASCE, pp. 265-290.
49. Warner, J. (2001). Soil Strengthening by Grouting, ASCE Geotechnical Special Publication, 113, pp 913-927.
50. Warner, J. (1998). Pressure behaviour: an important monitoring tool in grouting, Ground Improvement 2, pp. 5-10.
51. Yanagisawa, E. and Panah, A. K. (1994). Two dimensional study of hydraulic fracturing criteria in cohesive soils, Soils and Foundations, Vol 34, No. 1, pp. 1-9.