Synergistic effect of nano- and micrometer-size ceramic fibers on the tribological and thermal properties of automotive brake lining

Journal of Reinforced Plastics and Composites

Volumn 29, Issue 18, 2010, Pages 2732-2743

  Wu, Yaoqing ^a   Zeng, Ming ^a   Yu, Ling ^a   Fan, Liren ^a  

^a CHINA UNIVERSITY OF GEOSCIENCES   (China)

Author keywords

6TiO 2); ceramic fiber; friction coefficient; potassium titanate whiskers (K2O; thermal stability; wear resistance

Indexed keywords

AUTOMOTIVE BRAKE; ENVIRONMENTAL SCANNING ELECTRON MICROSCOPY; FILLER RETENTION; FRICTION COEFFICIENT; FRICTION PERFORMANCE; POTASSIUM TITANATE WHISKERS; POTASSIUM TITANATE WHISKERS (K2O; SYNERGISTIC EFFECT; THERMAL BEHAVIORS; THERMAL PROPERTIES; THERMAL STABILITY; TIO; WEAR RATES; WORN SURFACE;

BRAKE LININGS; CERAMIC FIBERS; CRYSTAL WHISKERS; FIBERS; FRICTION; FRICTION MATERIALS; HEAT RESISTANCE; IMPACT STRENGTH; MICROMETERS; POTASSIUM; REFRACTORY MATERIALS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; TITANIUM COMPOUNDS; TRIBOLOGY; WEAR RESISTANCE;

FIBER REINFORCED MATERIALS;

ABRASION RESISTANCE; CERAMIC FIBERS; FIBERS; FRICTION FACTOR; GRAVIMETRY; IMPACT STRENGTH; MICROMETERS; POTASSIUM; REINFORCED PLASTIC; SCANNING ELECTRON MICROSCOPY; THERMAL ANALYSIS; THERMAL PROPERTIES; THERMAL STABILITY; TITANIUM COMPOUNDS;

EID: 77956789840     PISSN: 07316844     EISSN: 15307964     Source Type: Journal    
DOI: 10.1177/0731684409360996     Document Type: Article

References (25)

1. Lu, Y.F., Tang, C.F., Zhao, Y.L. and Wright, M.A. (2004). Optimization of a Semimetallic Friction Material Formulation, Journal of Reinforced Plastics and Composites, 23: 1537-1545.
2. Hee, K.W. and Filip, P. (2005). Performance of Ceramic Enhanced Phenolic Matrix Brake Lining Materials for Automotive Brake Linings, Wear, 259: 1088-1096.
3. Jacko, M.G., Tsang, P.H.S. and Rhee, S.K. (1984). Automotive Friction Materials Evolution during the Past Decade, Wear, 100: 503-515.
4. Suresha, B., Chandramohan, G., Samapthkumaran, P., Seetharamu, S. and Vynatheya, S. (2006). Friction and Wear Characteristics of Carbon-Epoxy and Glass-Epoxy Woven Roving Fiber Composites, Journal of Reinforced Plastics and Composites, 25: 771-782.
5. Patnaik, A., Satapathy, A., Mahapatra, S.S. and Dash, R.R. (2009). A Comparative Study on Different Ceramic Fillers Affecting Mechanical Properties of Glass-Polyester Composites, Journal of Reinforced Plastics and Composites, 28: 1305-1318.
6. Mohanty, S. and Chugh, Y.P. (2007). Development of Fly Ash-based Automotive Brake Lining, Tribology International, 40: 1217-1224.
7. Hayer, L.G., Bach, A., Neilsen, G.T. and Morgen, P. (1999). Tribological Properties of Automotive Disc Brakes with Solid Lubricants, Wear, 232: 168-175.
8. Thorpe, A. and Harrison, R.M. (2008). Sources and Properties of Non-exhaust Particulate Matter from Road Traffic: A Review, Science of the Total Environment, 400: 270-282.
9. Satapathy, B.K. and Bijwe, J. (2005). Influence of Operating Parameters on the Performance of Friction Composites Based on Combinations of Rock Fibers and Organic Fibers, Journal of Reinforced Plastics and Composites, 24: 579-595. (Pubitemid 40690626)
10. Talegaonkar, R.P. and Gopinath, K. (2009). Influence of Alumina Fiber Content on Properties of Non-asbestos Organic Brake Friction Material, Journal of Reinforced Plastics and Composites, 28: 2069-2081.
11. Gopal, P., Dharani, L.R. and Blum, F.D. (1994). Fade and Wear Characteristics of a Glass-fiber-reinforced Phenolic Friction Material, Wear, 174: 119-127.
12. Kim, S.K., Cho, M.H., Lim, D.S. and Jang, H. (2001). Synergistic Effects of Aramid Pulp and Potassium Titanate Whiskers in the Automotive Friction Material, Wear, 251: 1484-1491.
13. Zhang, Z.-Z., Su, F.-H., Wang, K., Jiang, W., Men, X.-H. and Liu, W.-M. (2005). Study on the Friction and Wear Properties of Carbon Fabric Composites Reinforced with Micro- and Nano-Particles, Materials Science Engineering: A, 404: 251-258.
14. Zhang, G., Chang, L. and Schlarb, A.K. (2009). The Roles of Nano-SiO2 Particles on the Tribological Behavior of Short Carbon Fiber Reinforced PEEK, Composites Science and Technology, 69: 1029-1035.
15. Xian, G., Walter, R. and Haupert, F. (2006). A Synergistic Effect of Nano-TiO2 and Graphite on the Tribological Performance of Epoxy Matrix Composites, Journal of Applied Polymer Science, 102: 2391-2400.
16. Su, F.-H., Zhang, Z.-Z., Wang, K., Jiang, W., Men, X.-H. and Liu, W.-M. (2006). Friction and Wear Properties of Carbon Fabric Composites Filled with Nano-Al2O3 and Nano-Si3N4, Composites: Part A, 37: 1351-1357.
17. Kuo, S.W., Chan, S.C. and Chang, F.C. (2003). Effect of Hydrogen Bonding Strength on the Microstructure and Crystallization Behavior of Crystalline Polymer Blends, Macromolecules, 36: 6653-6661.
18. Zeng, M., Zhang, L. and Zhou, Y. (2004). Effects of Solid Substrate on Structure and Properties of Casting Waterborne Polyurethane/Carboxymethylchitin Films, Polymer, 45: 3535-3545.
19. Zeng, M., Zhang, L. and Kennedy, J.F. (2005). Intermolecular Interaction and Properties of Cross-linked Materials from Poly(Ester-Urethane) and Nitrochitosan, Carbohydrate Polymers, 60: 399-409.
20. Ma, Y., Martynkova, G.S., Valaskova, M., Matejka, V. and Lu, Y. (2008). Effects of ZrSiO4 in Non-metallic Brake Friction Materials on Friction Performance, Tribology International, 41: 166-174.
21. Dureja, N., Bijwe, J. and Gurunath, P.V. (2009). Role of Type and Amount of Resin on Performance Behavior of Non-asbestos Organic (NAO) Friction Materials, Journal of Reinforced Plastics and Composites, 28: 489-497.
22. Qi, H.S. and Day, A.J. (2007). Investigation of Disc/Pad Interface Temperatures in Friction Braking, Wear, 262: 505-513.
23. Zeng, M. and Zhang, L. (2006). Effects of Temperature on Morphology and Properties of Films Prepared from Poly(ester-urethane) and Nitrochitosan, Macromolecular Materials and Engineering, 291: 148-154.
24. Zeng, M. and Zhang, L. (2006). Effects of Reaction and Cure Temperatures on Morphology and Properties of Poly(Ester-Urethane), Journal of Applied Polymer Science, 100: 708-714.
25. Filip, P., Weiss, Z. and Rafaja, D. (2002). On Friction Layer Formation in Polymer Matrix Composite Materials for Brake Applications, Wear, 252: 189-198.