Spatial modelling of industrial heat loads and recovery potentials in the UK

Energy Policy

Volumn 38, Issue 10, 2010, Pages 5878-5891

  McKenna, R C ^a   Norman, J B ^a  

^a University of Bath   (United Kingdom)

Author keywords

Energy and exergy analysis; Heat recovery; Manufacturing

Indexed keywords

INDUSTRIAL HEATING; MANUFACTURE; THERMAL LOAD; WASTE HEAT; WASTE HEAT UTILIZATION;

ENERGETIC AND EXERGETIC ANALYSIS; ENERGY AND EXERGY ANALYSIS; ENERGY-INTENSIVE SECTORS; EU EMISSIONS TRADING SCHEME; NATIONAL ALLOCATION PLANS; SPECIFIC ENERGY CONSUMPTION; TECHNICAL POTENTIAL; TEMPORAL CONSTRAINTS;

ENERGY UTILIZATION;

ENERGY USE; EXERGY; INDUSTRIAL PRODUCTION; MANUFACTURING; MODELING; RECOVERY; SPATIAL ANALYSIS; THERMODYNAMICS;

UNITED KINGDOM;

EID: 77956419677     PISSN: 03014215     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enpol.2010.05.042     Document Type: Article

References (67)

1. AEA Energy and Environment, last updated, 2009. Industrial Heat Map. (accessed 25-3-2009).
2. APPE, last updated, 2006. Facts and figures. (accessed 25-3-2009).
3. Bejan, A., Moran, M., Tsatsaronis, G., 1996. Thermal Design and Optimization. John Wiley and Sons, Inc., New York.
4. BERR, 2007. Digest of United Kingdom Energy Statistics 2007 [DUKES]. TSO/National Statistics, London.
5. BERR, 2008a. Heat Call for Evidence. Department for Business Enterprise and Regulatory Reform, London.
6. BERR, 2008b. Monthly Statistics of Building Materials and Components. BERR/National Statistics, London.
7. BERR, 2008c. DUKES Table 6.9: CHP - Use of Fuels by Sector. BERR, London, [spreadsheet].
8. Bisio, G., 1997. Energy recovery from molten slag and exploitation of the recovered energy. Energy 22 (5), 501-509.
9. Bisio, G., Rubatto, G., 2000. Energy saving and some environment improvements in coke-oven plants. Energy 25 (3), 247-265.
10. Boustead, I., Hancock, G.F., 1979. Handbook of Industrial Energy Analysis. Ellis Norwood, Chichester.
11. Brown, H.L., Hamel, B.B., Hedman, B.A., 1985. Energy Analysis of 108 Industrial Processes. Drexel University, Philadelphia.
12. Chemical Week, 2006a. Product focus: ammonia. Chemical Week August 30, 43.
13. Chemical Week, 2006b. Product focus: soda ash. Chemical Week December 13, 32.
14. Chemical Week, 2007. Product focus: titanium dioxide. Chemical Week February 14/21, 26.
15. Choudrie, S.L., Jackson, J., Watterson, J.D., Murrells, T., Passant, N., Thomson, A., Cardenas, L., Leech, A., Mobbs, D.C., Thistlethwaite, G., 2008. UK Greenhouse Gas Inventory, 1990-2006. DEFRA, London.
16. CIGT, 2002. Enhancing the Competitiveness of the UK Chemicals Industry. BERR, London.
17. de Beer, J.G., Worrell, E., Blok, K., 1998. Future technologies for energy-efficient iron and steel making. Annual Review of Energy and Environment 23, 123-205.
18. De Beer, J., Worrell, E., Blok, K., 1998. Long-term energy-efficiency improvements in the paper and board industry. Energy 23 (1), 21-42.
19. DEFRA, 2001. Umbrella Climate Change Agreement for the Lime Sector, DEFRA.
20. DEFRA, 2007a. Climate Change Agreements: Results of the Third Target Period Assessment. DEFRA, London.
21. DEFRA, 2007b. EU Emissions Trading Scheme: Approved Phase II National Allocation Plan 2008-2012. DEFRA, London.
22. DEFRA, 2007c. EU ETS Phase II Research Documentation: Glass. DEFRA, London.
23. DTI, 2006. Guidance on Background Information to Accompany Notifications Under Section 14(1) of the Energy Act 1976 and Applications Under Section 36 of the Electricity Act 1989. DTI, London.
24. DTI, 2007. ECUK Table 4.6: Detailed Industrial Energy Consumption by Fuel 1990 to 2005. DTI, London, [spreadsheet].
25. EC JRC IPTS, last updated 2008. Reference documents. (accessed 25-3-2009).
26. EEF, 2007. UK Steel: Key Statistics 2007. EEF, London.
27. Energetics, 2000. Energy and Environmental Profile of the U.S. Iron and Steel Industry. USDOE ITP, Washington, DC.
28. Energetics, E3M, 2004. Energy Use, Loss and Opportunities Analysis: U.S. Manufacturing and Mining. USDOE, Industrial Technologies Program, Washington.
29. Entec UK Ltd., 2006b. EU Emissions Trading Scheme Phase II Review of New Entrants' Benchmarks-Integrated Steelworks. DTI, London.
30. Entec UK Ltd., 2006a. EU Emissions Trading Scheme Phase II Review of New Entrants' Benchmarks-Iron and Steel (EAF Steelmaking). DTI, London (Version 2).
31. Entec UK Ltd., 2006c. EU Emissions Trading Scheme Phase II Review of New Entrants' Benchmarks-Lime. DTI, London (Version 2).
32. Entec UK Ltd., NERA Economic Consulting, 2005. EU Emissions Trading Scheme benchmark research for Phase 2. Final Report, DTI, London.
33. Environment Agency, 2001. IPPC S3.01: Sector Guidance Note: Guidance for the Cement and Lime Sector. Environment Agency, Bristol.
34. Enviros Consulting, 2002. Sectoral Mass Balance Study for the UK Chemicals Industry. Biffaward, Newark, Nottinghamshire.
35. Enviros Consulting, 2006a. EU ETS Phase II New Entrant Benchmarks Supporting Documentation: Petrochemicals. DTI, London.
36. Enviros Consulting, 2006b. EU ETS Phase II New Entrant Benchmarks Supporting Documentation: Ceramics. DTI, London.
37. Enviros Consulting, 2006c. EU ETS Phase II New Entrant Benchmarks Supporting Documentation: Glass. DTI, London.
38. Ertem, M.E., ĺzdabak, A., 2005. Energy balance application for Erdemir Coke Plant with thermal camera measurements. Applied Thermal Engineering 25 (2-3), 423-433.
39. European Commission, 2001a. IPPC Reference Document on Best Available Techniques in the Chlor-Alkali Manufacturing Industry. European Commission, Seville.
40. European Commission, 2001b. IPPC Reference Document on Best Available Techniques in the Non-Ferrous Metals Industry. European Commission, Seville.
41. European Commission, 2003a. IPPC Reference Document on Best Available Techniques in the Large Volume Organic Chemical Industry. European Commission, Seville.
42. European Commission, 2003b. State Aid N 340/2003-UK, State aid in favour of Ineos Chlor (multisectoral framework). Letter from Mario Monti, Member of the European Commission, to the Right Hon Jack Straw MP. European Commission, Brussels, Belgium.
43. European Commission, 2004. IPPC Draft Reference Document on Best Available Techniques in the Large Volume Inorganic Chemicals, Ammonia, Acids and Fertilisers Industries. European Commission, Seville.
44. European Commission, 2005a. IPPC Draft Reference Document on Best Available Techniques in the Large Volume Inorganic Chemicals-Solid and Other Industry. European Commission, Seville.
45. European Commission, 2005b. IPPC Draft Reference Document on Best Available Techniques in the Production of Polymers. European Commission, Seville.
46. European Commission, 2007. Reference Document on Best Available Techniques in the Cement and Lime Manufacturing Industries (Draft). European Commission, Seville.
47. European Commission, 2008a. IPPC Draft Reference Document on Best Available Techniques for the Non-Ferrous Metals Industries. European Commission, Seville.
48. European Commission, 2008b. Draft Reference Document on Best Available Technologies for the Production of Iron and Steel. European Commission, Directorate General, JRC, Seville, Spain.
49. 2 Emissions. International Energy Agency, Paris.
50. Jochem, E., 2000. Energy end-use efficiency. In: Energy and the Challenge of Sustainability, The World Energy Assessment Report, UNDP, New York (Chapter 6).
51. Martin, N., Worrell, E., Ruth, M., Price, L., Elliot, R.N., Shipley, A.M., Thorne, J., 2000. Emerging Energy-Efficient Industrial Technologies. LBNL/ACEEE, Berkeley, USA.
52. McKenna, R.C., 2009. Industrial energy efficiency: interdisciplinary perspectives on the thermodynamic, technical and economic constraints. Ph.D., University of Bath.
53. National Grid, 2008. GB Seven Year Statement 2008: Table 4.1 - Installed Capacity of Medium and Small Generation Embedded within Distribution Networks, National Grid Plc, London, [spreadsheet].
54. National Statistics, 2008. National Statistics Postcode Directory: 2008 User Guide. ONS, London.
55. NineSigma, 2007. Request for Proposal: Waste Heat Recovery from Aluminium Smelting Off-Gas. NineSigma, Cleveland, Ohio.
56. ONS, 2008. Annual Business Inquiry: 2007 Provisional Results. ONS, Newport, Wales.
57. Quirk, R., Shulver, I.N.W., Bird, D.A., McIntosh, R.M., 1994. Flat glass furnaces. Patent EP0599548, Pilkington Glass Ltd. (GB).
58. Rafiqul, I., Weber, C., Lehmann, B., Voss, A., 2005. Energy efficiency improvements in ammonia production-perspectives and uncertainties. Energy 30 (13), 2487-2504.
59. Shorrock, L.D., Utley, J.I., 2003. Domestic Energy Factfile 2003. Building Research Establishment, Garston.
60. Stubbles, J., 2000. Energy Use in the U.S. Steel Industry: An Historical Perspective and Future Opportunities. USDOE, Washington, DC.
61. UNSD, 2005. Industrial Commodities Database. United Nations Industrial Commodities Division, New York.
62. US DOE ITP, 2006. Energy savings assessment for ESA-025. Final Public Report, USDOE, Washington, DC.
63. USEPA, 1995. Compilation of Air pollutant Emission Factors. Vol. I: stationary point and area sources [AP-42], Section 6.1: carbon black. USEPA, North Carolina.
64. Werner, S., 2006. Ecoheatcool Work Package 4: possibilities with more district heating in Europe. Euroheat & Power, Brussels.
65. Worrell, E., Phylipsen, D., Einstein, D., Martin, N., 2000. Energy use and energy intensity of the U.S. chemical industry. Energy Analysis Department, Environmental Energy Technologies Division, LBNL, Berkeley, CA.
66. Worrell, E., Price, L., Galitsky, C., 2004. Emerging energy-efficient technologies in industry: case studies of selected technologies. Ernesto Orlando Lawrence Berkeley National Laboratory, Environmental Energy Technologies Division, Berkeley.
67. Worrell, E., Price, L., Martin, N., 2001. Energy efficiency and carbon dioxide emissions reduction opportunities in the US iron and steel sector. Energy 26, 513-536.