Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process

Materials and Design

Volumn 32, Issue 1, 2011, Pages 139-145

  Ghosh, Subrata Kumar ^a   Saha, Partha ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

A. Al based metal matrix composite; C. Direct metal laser sintering; E. Wear

Indexed keywords

ABRASIVE WEARS; CRACK DENSITY; DIRECT METAL LASER SINTERING; E. WEAR; METAL MATRIX COMPOSITES; SCANNING ELECTRON MICROGRAPHS; SIC PARTICULATES; VOLUME PERCENTAGE; WEAR BEHAVIORS; WEAR PERFORMANCE; WEAR RATES; WEAR TEST; WORN SURFACE;

ABRASIVES; ALUMINUM; CRACKS; LASER HEATING; METALS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; SINTERING; WEAR OF MATERIALS; WEAR RESISTANCE;

METALLIC MATRIX COMPOSITES;

EID: 77956177865     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.06.020     Document Type: Article

References (31)

1. Sannino A.P., Rack H.J. Dry sliding wear of discontinuously reinforced aluminum composites: review and discussion. Wear 1995, 189:1-19.
2. Shipway P.H., Kennedy A.R., Wilkes A.J. Sliding wear behaviour of aluminium-based metal matrix composites produced by a novel liquid route. Wear 1998, 216:160-171.
3. Sawla S., Das S. Combined effect of reinforcement and heat treatment on the two body abrasive wear of aluminum alloy and aluminum particle composites. Wear 2004, 257:555-561.
4. Hassan A.M., Alrashdan A., Hayajneh M.T., Mayyas A.T. Wear behavior of Al-Mg-Cu-based composites containing SiC particles. Tribol Int 2009, 42:1230-1238.
5. Sahin Y., Özdin K. A model for the abrasive wear behaviour of aluminium based composites. Mater Des 2008, 29:728-733.
6. Sahin Y. Tribological behaviour of metal matrix and its composite. Mater Des 2007, 28:1348-1352.
7. Li X.Y., Tandon K.N. Effect of ion implantation on the dry sliding wear behavior of SiC reinforced Al-Si composite. Surf Coat Technol 1997, 90:136-142.
8. Wilson S., Alpas A.T. Effect of temperature on the sliding wear performance of A1 alloys and A1 matrix composites. Wear 1996, 196:270-278.
9. Wilson S., Alpas A.T. Wear mechanism maps for metal matrix composites. Wear 1997, 212:41-49.
10. Miyajima T., Iwai Y. Effects of reinforcements on sliding wear behavior of aluminum matrix composites. Wear 2003, 255:606-616.
11. 3. Wear 2009, 266:1082-1090.
12. Natarajan S., Narayanasamy R., Kumaresh Babu S.P., Dinesh G., Anil Kumar B., Sivaprasad K. Sliding wear behaviour of Al 6063/TiB2 in situ composites at elevated temperatures. Mater Des 2009, 30:2521-2531.
13. Kumar S., Balasubramanian V. Developing a mathematical model to evaluate wear rate of AA7075/SiCp powder metallurgy composites. Wear 2008, 264:1026-1034.
14. Ma T., Yamaura H., Donald A.K., Voigt R.C. Dry sliding wear behavior of cast SiC-reinforced Al MMCs. Mater Sci Eng A 2003, 360:116-125.
15. Deuis R.L., Subramanian C., Yellup J.M. Abrasive wear of aluminium composites-a review. Wear 1996, 201:132-144.
16. Onat A., Akbulut H., Yilmaz F. Production and characterisation of silicon carbide particulate reinforced aluminium-copper alloy matrix composites by direct squeeze casting method. J Alloys Compd 2007, 436:375-382.
17. Sahin Y. Preparation and some properties of SiC particle reinforced aluminium alloy composites. Mater Des 2003, 24:671-679.
18. Gu D., Shen Y. Influence of reinforcement weight fraction on microstructure and properties of submicron WC-Cop/Cu bulk MMCs prepared by direct laser sintering. J Alloys Compd 2007, 431:112-120.
19. Simchi A. Direct laser sintering of metal powders: mechanism, kinetics and microstructural features. Mater Sci Eng A 2006, 428:148-158.
20. Wang Y., Bergström J., Burman C. Characterization of an iron-based laser sintered material. J Mater Process Technol 2006, 172:77-87.
21. Simchi A., Pohl H. Direct laser sintering of iron-graphite powder mixture. Mater Sci Eng A 2004, 383:191-200.
22. Gåård A., Krakhmalev P., Bergström J. Microstructural characterization and wear behavior of (Fe, Ni)-TiC MMC prepared by DMLS. J Alloys Compd 2006, 21:166-171.
23. Ramesh C.S., Srinivas C.K., Channabasappa B.H. Abrasive wear behavior of laser sintered iron-SiC composites. Wear 2009, 267:1777-1783.
24. Simchi A., Godlinskic D. Effect of SiC particles on the laser sintering of Al-7Si-0.3Mg alloy. Scripta Mater 2008, 59:199-202.
25. Chatterjee A.N., Kumar S., Saha P., et al. An experimental design approach to selective laser sintering of low carbon steel. J Mater Process Technol 2003, 136:151-157.
26. Murali K., Chatterjee A.N., Saha P., et al. Direct selective laser sintering of iron-graphite powder mixture. J Mater Process Technol 2003, 136:179-185.
27. ED job surface integrity. J Mater Process Technol 2007, 189:169-177.
28. Zhou S., Zeng X., Hu Q., Huang Y. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization. Appl Surf Sci 2008, 255:1646-1653.
29. Kadolkar P.B., Watkins T.R., De Hosson J.Th.M., Kooi B.J., Dahotre N.B. State of residual stress in laser-deposited ceramic composite coatings on aluminum alloys. Acta Mater 2007, 55:1203-1214.
30. Pauschitza A., Roy M., Franek F. Mechanisms of sliding wear of metals and alloys at elevated temperatures. Tribol Int 2008, 41:584-602.
31. Ibrahim I.A., Mohamed F.A., Lavernia E.J. Particulate reinforced metal matrix composites - a review. J Mater Sci 1991, 26:1137-1156.