Purification of white waters by selective flotation

BioResources

Volumn 5, Issue 4, 2010, Pages 2153-2172

  Haapala, Antti ^a   Körkkö, Mika ^a   Kemppainen, Kalle ^a   MacNeil, Donald ^b   Niinimäki, Jouko ^a  

^a UNIVERSITY OF OULU   (Finland)

^b ÅBO AKADEMI UNIVERSITY   (Finland)

Author keywords

Extraction; Extractives; Froth; Ink; Pitch; Process water; Separation; Stickies

Indexed keywords

EXTRACTIVES; FROTH; PITCH; PROCESS WATER; STICKIES;

CONTAMINATION; INK; PAPER PRODUCTS; PAPERMAKING; PAPERMAKING MACHINERY; REMOVAL;

FROTH FLOTATION;

EXTRACTION; EXTRACTIVES; FLOTATION; FOAM; INK; PAPER MAKING EQUIPMENT; PAPER PRODUCTS; PITCH; POLLUTION; REMOVAL; SEPARATION; STICKIES; WATER SUPPLY;

EID: 77956089349     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (53)

1. Allen, S. L., Allen, L. H., and Flaherty, T. D. (1993). "Defoaming in the pulp and paper industry," in: Defoaming: Theory and Industrial Applications, Garrett, P. R. (ed.), CRC Press, 344 pp.
2. Ajersch, M., and Pelton, R. (1996). "Mechanisms of pulp loss in flotation deinking," J. Pulp Pap. Sci. 22(9), 338-345.
3. Ben, Y., Dorris, G., Hill, G., and Allen, J. (2003). "Contaminant removal from deinking process water, Part I: Mill benchmarking," Pulp Pap. Can. 104(1), 42-48.
4. Ben, Y., and Dorris, G. (2004). "Characterization of dissolved air flotation rejects," Pulp Pap. Can. 105(11), 28-33.
5. Brune, O. (1917). "Verfahren zum Ausscheiden von Harzen, Fetten und Ölen aus Zellstoff, Holzstoff und aus Holz erzeugten Papierstoffen," D.R.P. 310554.
6. Carré, B., Vernac, Y., and Beneventi, D. (2001). "Is there something interesting to recover in flotation deinking froths?," Pulp Pap. Can. 102(6), T152-T155.
7. De Grado, A. F., Lascar, A., Pottier, S., Carré, B, and Zeno, E., (2010). "How to improve paper mill efficiency by a global control of surface active substances S.A.S," Conf. Proc. of PTS-CTP Deinking Symposium, Munich, Germany, 27-29 April, Paper 20.
8. th Research Forum on Recycling, Niagara Falls, Canada, 23-26. September, 321-328.
9. Drabek, O., Sterne, J., and van de Ven, T. G. M. (1998). "Effect of deinking chemicals on the deposition of fines and fillers on an air-water interface," J. Pulp Pap. Sci. 24(4), 116-120.
10. Eklund, D., and Lindström, T. (1991). Paper Chemistry, an Introduction, DT Paper Science Publications, Grankulla, Finland, 305 p.
11. Ekman, R. (2000). "Resin during storage and in biological treatment," in Pitch Control, Wood Resin and Deresination, Back, E. L., and Allen, L. H. (eds.). TAPPI Press, Atlanta, 185-204.
12. Gabl, H., Hamm, U., Bobek, B., Putz, H-J., Schabel, S., Hamann, L., Cordier, O., Kappen, J., and Pauly, D. (2006). "Sticky and trash removal techniques for water loops in paper mills," Paper Tech. 47(September), 31-34.
13. Haapala, A., Körkkö, M., Laitinen, O., and Niinimäki, J. (2009). "Methods for process water ink content analysis," Conf. Proc. of TAPPI EPE, Memphis, TN, USA, October 14-16.
14. th Appita Annual Conf., Melbourne, AUS, April, 18-21.
15. Haynes, D. (2003). "Measurement of micro stickies formation," Prog. Pap. Recycl. 12(2), 19-26.
16. Helle, T. (2008). "Characterization and removal of gas in papermaking," Dissertation, Helsinki University of Technology, Finland, 51 pp.
17. Holik, H. (2000). "Unit operations and equipments in recycled fiber processing", In: Göttsching, L. and Pakarinen, H., Recycled Fiber and Deinking, Fapet Oy, Jyväskylä, Finland, 94 p.
18. Holmbom, B., and Sundberg, A. (2003). "Dissolved and colloidal substances accumulating in papermaking process waters," Wochenblatt für Papierfabrikation, 131(21), 1305-1311.
19. Hubbe, M. A. (2007a). "Water and papermaking 2. White water components," Paper Tech. 48(2), 31-40.
20. Hubbe, M. A. (2007b). "Water and papermaking 3: Measures to clean up process water," Paper Tech. 48(3), 23-30.
21. Hubbe, M. A., Rojas, O. J., and Venditti, R. A. (2006). "Control of tacky deposits on paper machines - A review," Nord Pulp Pap. Res. J. 21(2), 154-171.
22. Johansson, H., Wikman, B., Lindström, E., and Österberg, F. (2003). "Detection and evaluation of micro-stickies," Prog. Pap. Recycl. 12(2), 4-12.
23. Korpela, A. (2006). "Removal of resin from mechanical pulps by selective flotation: Mechanisms of resin flotation and yield loss on fibers," J. Wood Chem. Tech. 26(2), 175-186.
24. Käyhkö, J. (2002). "The influence of process conditions on the deresination efficiency in mechanical pulp washing," Dissertation, Lappeenranta University of Technology, Digipaino, 112 pp.
25. Körkkö, M., Laitinen, O., Vahlroos, S., Ämmälä, A., and Niinimäki, J. (2008). "Components removal in flotation deinking," Prog. Pap. Recycl. 17(4), 15-22.
26. Lee, H. L., and Kim, J. M. (2006). "Quantification of macro and micro stickies and their control by flotation in OCC recycling process," Appita J. 59(1), 31-36.
27. Leiviskä, T., and Rämö, J. (2008). "Coagulation of wood extractives in chemical pulp bleaching filtrate by cationic polyelectrolytes," J. of Hazardous Materials 153, 525-531.
28. Lim, J. C. (2009). "Effect of formation of calcium carbonate on foam stability in Neodol 25-3S anionic surfactant Systems," J. Ind. Eng. Chem., 15, 257-264.
29. Ljunggren, M., and Jönsson, L. (2003). "Separation characteristics in dissolved air flotation - Pilot and full-scale demonstration," Water Sci. Tech. 48(3), 89-96.
30. MacNeil, D., Holmbäck, Å., Lassus, A., Hoel, H., Røring, A., and Holmbom, B. (2004). "Removal of fatty and resin acids in European deinking processes," Prog. Pap. Recycl. 14(1), 6-13.
31. MacNeil, D., Sarja, T., Reunanen, M., Xu, C.-L., and Holmbom, B. (2006). "Distribution of stickies in deinked pulp, Part I: Methods for extraction and analysis of stickies," Professional Papermaking 1/2006, 10-14.
32. MacNeil, D., Sundberg, A., Vähäsalo, L., and Holmbom, B. (2010). "Effect of calcium on the phase distribution of resin and fatty acids in pitch emulsions," J. Disp. Sci. Tech., (In press)
33. Murray, G., Stack, K., McLean, D. S., Shen, W., and Garnier, G. (2009). "Dynamics of colloidal pitch adsorption at the solid-liquid interface by surface plasmon resonance," Colloids and Surfaces A: Physicochem. Eng. Aspects, 341, 127-133.
34. Nelson, G. L. (1981). "The screening quotient: a better index for screening performance," Tappi Journal, 64(5): 133-134.
35. th PTS-CTP Deinking Symposium, Leipzig, Germany, 25-27 April, Paper 31.
36. rd an. meeting of the Pulp and Paper Technical Association of Canada, v B, p B263-B270.
37. Ricard, M., Dorris, G., Lapointe, C., Dionne, Y., and Daneault, C. (2008). "Prospects of using column flotation to decontaminate paper machine whitewater," Conf. Proc. of PTS-CTP Deinking Symposium, Leipzig, Germany, 15-17. April, 34, 1-16.
38. th Appita Annual Conf. Canberra, Australia, 19-21 April, 79-84.
39. Røring, A., and Wackerberg, E. (1997). "Characterization of deinking white water - Influence on flotation and bleaching efficiency," Pulp Pap. Can. 98(5), 17-21.
40. Røring, A., Øvrum, T., Røstad, T., and Harbak, G. E. (2002). "Hunting high yield," Proc. of PTS-CTP Deinking Symposium, Munich, Germany, 23-26 April, 19, 1-13.
41. Rundlöf, M., Htun, M., Höglund, H., and Wagberg, L. (2000a). "Mechanical pulp fines of poor quality - characteristics and influence of white water," J. Pulp Pap. Sci. 26(9), 308-316.
42. Rundlöf, M., Sjölund, A-K., Ström, H., and Asell, I. (2000b). "Effect of dissolved and colloidal substances released from TMP on the properties of TMP fines," Nord Pulp Pap. Res. J. 15(4), 256-265.
43. Saarimaa, V., Sundberg, A., Holmbom, B., Blanco, A., Negro, C., and Fuente, E. (2006). "Purification of peroxide-bleached TMP water by dissolved air flotation," Tappi J., 5(5), 15-21.
44. Sarja, T., Zabihian, M., Kourunen, P., and Niinimäki, J. (2004). "New method for measuring potential secondary stickies in deinked pulp filtrates," Water Sci. Technol. 50(3), 207-215.
45. Sarja, T. (2007). "Measurement, nature and removal of stickies in deinked pulp," dissertation, University of Oulu, Finland, 82 pp.
46. Sarja, T., MacNeil, D., Huber, P., and Niinimäki, J. (2007). "Removal of stickies in flotation," Prog. Pap. Recycl. 16(3), 5-11.
47. Sitholé, B. B., and Allen, L. (2002). "The effects of wood extractives on system closure," Tappsa J. 105(7), 22-30.
48. Stoor, T. (2006). "Air in pulp and papermaking processes," Dissertation, University of Oulu, Finland, 66 pp.
49. Sundberg, A., Holmbom, B., Willför, S., and Pranovich, A. (2000). "Weakening of paper strength by wood resin," Nord Pulp Pap. Res. J. 15(1), 46-53.
50. Valto, P., Knuutinen, J., Alén, R., Rantalankila, M., Lehmonen, J., Grönroos, A., and Houni, J. (2010). "Analysis of resin and fatty acids enriched in papermaking process waters," BioResources 5(1), 172-186.
51. Xu, Y., and Deng, Y. (2004). "The buildup of dissolved solids in closed white water systems," Tappi J. 3(8), 17-21.
52. Zhang, H., Miller, C., Garrett, P., and Raney, K. (2004). "Defoaming effect of calcium soap," J. Colloid Surf. Chem. 279, 539-547.
53. Örså, F., and Holmbom, B. (1994). "A convenient method for the determination of wood extractives in papermaking process waters and effluents," J. Pulp Pap. Sci. 20(12), J361-J365.