Utilization of coal combustion by-products in sustainable construction materials

Resources, Conservation and Recycling

Volumn 54, Issue 12, 2010, Pages 1060-1066

  Siddique, Rafat ^a  

^a THAPAR UNIVERSITY   (India)

Author keywords

Boiler slag; Bottom ash; Clean coal ash; Fly ash; Leachate methods

Indexed keywords

ASH HANDLING; ASHES; BOILERS; COAL; COAL ASH; COMBUSTORS; ENVIRONMENTAL IMPACT; FLY ASH; MANUFACTURE; MUNICIPAL SOLID WASTE; SLAGS; SOLID WASTES; SUSTAINABLE DEVELOPMENT; WASTE DISPOSAL; WASTE INCINERATION; WASTE MANAGEMENT; WASTE UTILIZATION;

BOILER SLAG; BOTTOM ASH; CLEAN COAL; COAL COMBUSTION BYPRODUCTS; COAL COMBUSTION PRODUCTS; FLUE GAS DESULFURIZATION(FGD); LEACHATES; SUSTAINABLE CONSTRUCTION;

COAL COMBUSTION;

COAL;

BOTTOM ASH; COAL; ENVIRONMENTAL IMPACT; FLY ASH; INDUSTRIAL WASTE; MUNICIPAL SOLID WASTE; RECYCLING; WASTE DISPOSAL; WASTE MANAGEMENT;

BUILDING MATERIAL; COMBUSTION; ENVIRONMENTAL IMPACT; FLUE GAS; FLY ASH; PHYSICAL CHEMISTRY; RECYCLING; REVIEW; SLAG; SOLID WASTE MANAGEMENT;

EID: 77955849916     PISSN: 09213449     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.resconrec.2010.06.011     Document Type: Review

References (38)

1. ACAA. Coal combustion products (CCP)-production and use. Alexandria, VA: ACAA; 2007. p. 2.
2. ACI Committee 232. Use of fly ash in concrete. ACI Materials Journal 1997:381-409.
3. Bakoshi T, Kohno K, Kawasaki S, Yamaji N. Strength and durability of concrete using bottom ash as replacement for fine aggregate. ACI Special Publication (SP-179- 10) 1998:159-72.
4. Bilodeau A, Malhotra VM. High volume fly ash system: concrete solution for sustainable development. ACI Materials Journal 2000;97(1):41-8.
5. CAAA. Clean Air Act Amendments of 1990. Public Law 1990:101-549.
6. Cao C, Sun W, Qin H. The analysis of strength and fly ash effect on rollercompacted concrete with high volume fly ash. Cement and Concrete Research 2000;30(1):71-5.
7. Churchill EV, Amirkhanian SN. Coal ash utilization in asphalt concrete mixtures. ASCE Journal of Materials in Civil Engineering 1999;11(4):295-301.
8. Courts GD. The aggregate of the future is here today. In: Proceedings of the Ninth International Ash Use Symposium, ACAA; 1991. p. 1, 21-1-121-10.
9. Ghafoori N, Mora CAG. Compacted non-cement concrete utilizing fluidized bed and pulverized coal combustion by-products. ACI Materials Journal 1998;95(5):582-92.
10. Greer BA, Vandracek JE,HamRK,OmanDE. The nature and characteristics of foundry waste and its constructive use: a review of literature and current practice. Report submitted to United Foundrymen of Wisconsin, University of Wisconsin, Madison; 1989. 103 p.
11. Hay PD, Dunstan ER. Lightweight aggregate production and use in Florida. In: Proceedings of the Ninth International Ash Use Symposium, vol. 1; 1991. p. 22-1-22-10.
12. Hemmings R, Berry E. Evaluation of plastic filler applications for leached fly ash. EPRI Report No. CS-4765. Palo Alto, CA; 1986.
13. ICF Northwest. Advanced SO2 control by-product utilization laboratory evaluation. EPRI Report No. CS-6044. Palo Alto, CA; 1988.
14. ICF Technology Inc. Laboratory characterization of advanced SO2 control byproducts: spray dryer wastes. EPRI Report No. CS 5782. Palo Alto, CA; May 1988.
15. Kim AG, Kazonich G. Relative mass release of rates of trace elements from fly ash. In: Presented at the 1997 Ash Utilization Symposium; 1997.
16. Langley WS, Leaman GH. Practical uses for high-volume fly ash concrete utilizing a low calcium fly ash. ACI Special Publication (SP-178-30) 1998:545-73.
17. Naik TR, Ramme BW, Kolbeck HJ. Filling abandon underground facilities with CLSM fly ash slurry. ACI Concrete International 1990;12(7):1-7.
18. Naik TR, Ramme BW. High early strength fly ash concrete for precast/pre-stressed products. PCI Journal 1990;35(6):72-8.
19. Naik TR, Ramme BW, Tews JH. Use of high volumes of class C and class F fly ash in concrete. ASTM Cement Concrete and Aggregates 1994;16(1):12-20.
20. Naik TR, Singh SS, Belonger S. Development of manufacturing technology for low-cost, high performance, blended cements in Wisconsin. Experimental investigation CBU-1995-06.UWMCenter for By-Products Utilization, University of Wisconsin-Milwaukee; 1995a. p. 47.
21. Naik TR, Singh SS, Mohammad M. Properties of high performance concrete incorporating large amounts of high-lime fly ash. International Journal of Construction and Building Materials 1995b;9(4):195-204.
22. Naik TR, Singh SS, OlsonWA,Beffel JC. Temperature effects on strength and durability of high-performance concrete. In: Proceedings of the PCI/FHWA International Symposium on High Performance Concrete; 1997. p. 16.
23. Naik TR, Singh SS. Permeability of flowable slurry materials containing foundry sand and fly ash. ASCE Journal of Geotechnical and Geoenvironmental Engineering 1997;123(5):446-52.
24. Naik TR, Singh SS. Fly ash generation and utilization-an overview. In: Suri RK, Harapanhalli AB, editors. Recent trends in fly ash utilization. New Delhi: Grand Prix; 1998. p. 1-25.
25. Naik TR, Kraus RN. MPU ash as a potential source for combustion materials, CBU-2001-14. UWM Center for By-products Utilization, University of Wisconsin-Milwaukee; 2001. p. 63.
26. Naik TR, Singh SS, Ramme BW. Performance and leaching assessment of flowable slurry. ASCE Journal of Environmental Engineering 2001;127(4):359-68.
27. Pflughoeft-Hassett DF, Hasset D, Lillemoen CM. Comparative leaching of Midwestern coal fly ash and cements. In: Proceedings of the Tenth ACAA international ash symposium; 1993. p. 30-1-20-14.
28. Poon CS, Lam L, Wong YL. A study on high strength concrete prepared with large volumes of low calcium fly ash. Cement and Concrete Research 2000;30(3): 447-55.
29. Pytlik EC, Saxena J. Fly ash based autoclaved cellular concrete: the building material of the 21st century. In: Proceedings of the ninth international ash use symposium, vol. 1; 1991. p. 1, 25-1-25-12.
30. Quanttroni G, Levita G, Maronetti A. Fly ashes as modifier for low-cost polymeric materials. In: Proceedings of the tenth international ash use symposium; 1989. p. 2, 75-1-75-9.
31. Ramme BW, Nechvatal T, Naik TR, Kolbeck HJ. By-product lightweight aggregates from fly ash. In: A paper presented and pre-print published at the 1995 fall convention of ACI; 1995. p. 22.
32. Rohatgi PK, Keshavaram BN, Huang P, Guo R, Golden DM, Reinhardt S, Odor D. Microstructure and properties of cast aluminum fly ash particle composites. In: Proceedings of the tenth international ash use symposium; 1993. p. 2, 76- 1-76-22.
33. Rohatgi PK. Low-cost, fly ash-containing aluminum-matrix composites. Journal of Materials Science 1994:55-9.
34. Schrader EK. Roller compacted concrete for dams: the state of the art. In: Malhotra VM, editor. Advances in Concrete Technology. 2nd ed. Ottawa, Canada: Natural Resources Canada; 1994. p. 371-417.
35. Siddique R. Effect of fine aggregate replacement with class F fly ash on the abrasion resistance of concrete. Cement and Concrete Research 2003;33:1881-7.
36. Smith CL. FGD waste engineering properties are controlled by disposal choice. In: Proceedings of conference on utilization of waste materials in civil engineering construction; 1992.
37. Swamy RN, Hung HH. Engineering properties of high-volume fly ash concrete. ACI Special Publication (SP-178-19) 1998:331-59.
38. Wei LH. Utilization of coal combustion by-products for masonry construction. EPRI Report no. TR-100707. Palo Alto, CA; 1992. p. 1-2-B-12.