Modeling of particle emission during dry orthogonal cutting

Journal of Materials Engineering and Performance

Volumn 19, Issue 6, 2010, Pages 776-789

  Khettabi, Riad ^a   Songmene, Victor ^a   Zaghbani, Imed ^a   Masounave, Jacques ^a  

^a ÉCOLE DE TECHNOLOGIE SUPÉRIEURE   (Canada)

Author keywords

dry turning; modeling; particle emission; prediction

Indexed keywords

6061-T6 ALUMINUM ALLOY; AISI 4140 STEEL; CHIP SEGMENTATION; CUTTING CONDITIONS; CUTTING SPEED; DRY MACHINING; DRY TURNING; ENERGY APPROACH; GREY CAST IRON; MACHINING OPERATIONS; MACHINING PROCESS; METALLIC PARTICLES; MICROFRICTION; MODELING; NEW PARAMETERS; ORTHOGONAL CUTTING; ORTHOGONAL TURNING; PARTICLE EMISSIONS; PREDICTION; REDUCING PARTICLE; TOOL GEOMETRY; WORKING PROCESS; WORKPIECE MATERIALS;

CAST IRON; DUST; FORECASTING; MACHINING CENTERS; METAL WORKING; OCCUPATIONAL RISKS;

MACHINING;

EID: 77955773101     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11665-009-9538-z     Document Type: Article

References (49)

1. F.P. Holt, Inhaled Dust and Disease, Wiley-Interscience/John Wiley, New York, 1987
2. O. Witschger and F. Fabriès, Particules ultra-fines et santé au travail 1-caractéristiques et effets potentiels sur la santé, INRS, Vol 199, 2005, p 21-35. http://www.inrs.fr/htm/particules- ultra-fines-sante-travail.html (in French)
3. C. Ostiguy, G. Lapointe, L. Ménard, Y. Cloutier, M. Trottier, M. Boutin, M. Antoun, and C. Normand, Les nanoparticules: État des connaissances sur les risques en santé et sécurité du travail, IRSST, 2006. http://www.irsst.qc.ca/files/documents/PubIRSST/R-455.pdf (in French)
4. Q Zhang Y Kusaka K Donaldson 2000 Comparative Pulmonary Responses Caused by Exposure to Standard Cobalt and Ultra Fine Cobalt J. Occup. Health 42 179 184 10.1539/joh.42.179 1:CAS:528:DC%2BD3cXmtlSksbk%3D
5. G Oberdörster E Oberdörster J Oberdörster 2005 Nanotechnology: An Emerging Discipline Evolving from Studies of Ultra Fine Particles Environ. Health Perspect. 113 7 823 839 10.1289/ehp.7339 16002369 (Pubitemid 40984181)
6. G Kreyling M Semmler F Erbe P Mayer S Takenaka H Schultz G Oberdoster A Ziesenis 2002 Translocation of Ultra Fine Insoluble Iridium Particles from Lungs Epithelium to Extra Pulmonary Organs J. Toxicol. Environ. Health 65 20 1513 1530 10.1080/00984100290071649 1:CAS:528:DC%2BD38XosF2lsbw%3D (Pubitemid 35217498)
7. C Katz A Burkhalter W Dreyer 1984 Fluorescent Latex Micro Spheres as a Retrograde Neuronal Marker for In Vivo and In Vitro Studies of Visual Cortex Nature 310 498 500 10.1038/310498a0 1:STN:280:DyaL2c3ntVOhug%3D%3D 6205278 1984Natur.310..498K
8. AC Elder R Gelein M Azadniv M Frampton J Finkelstein G Oberdorster 2004 Systemic Effects of Inhaled Ultra Fine Particles in Two Compromised, Aged Rat Strains Inhale Toxicol. 16 461 471 10.1080/08958370490439669 1:CAS:528:DC%2BD2cXjvValsb0%3D (Pubitemid 38685138)
9. M Ramulu P Young H Kao 1999 Drilling of Graphite/Bismaleimide Composite Material J. Mater. Eng. Perform. 8 330 338 10.1361/105994999770346882 1:CAS:528:DyaK1MXjvFyht78%3D
10. Y Kimura J Sugimura 1984 Micro Geometry of Sliding Surfaces and Wear Particles Wear 100 33 45 10.1016/0043-1648(84)90004-8
11. Y Zhu HA Kishawy 2005 Influence of Alumina Particles on the Mechanics of Machining Metal Matrix Composites Int. J. Mach. Tools Manuf. 45 389 398 10.1016/j.ijmachtools.2004.09.013 (Pubitemid 40142532)
12. M Nouari I Iordanoff 2007 Effect of the Third-Body Particles on the Tool-Chip Contact and Tool-Wear Behaviour During Dry Cutting of Aeronautical Titanium Alloys Tribol. Int. 40 1351 1359 10.1016/j.triboint.2007.03.003 1:CAS:528:DC%2BD2sXmtlWhs7w%3D (Pubitemid 46863392)
13. M Cocks 1962 Interaction of Sliding Metal Surfaces J. Appl. Phys. 33 7 2152 2161 10.1063/1.1728920 1962JAP....33.2152C
14. DH Hwang DE Kim SJ Le 1999 Influence of Wear Particle Interaction in the Sliding Interface on Friction of Metals Wear 225-229 1 427 439 10.1016/S0043-1648(98)00371-8 (Pubitemid 30112890)
15. PA Swanson AF Vetter 1984 The Measurement of Abrasive Particle Shape and Its Effect on Wear ASLE Trans. 28 225 230
16. S Bahadur R Badruddin 1990 Erodent Particle Characterization and the Effect of Particle Size and Shape on Erosion Wear 138 189 208 10.1016/0043-1648(90)90176-B 1:CAS:528:DyaK3cXltFyquro%3D (Pubitemid 20710722)
17. M Liebhard A Levy 1991 The Effect of Erodent Particle Characteristics on the Erosion of Metals Wear 151 381 390 10.1016/0043-1648(91)90263-T 1:CAS:528:DyaK38XhsFKitLc%3D
18. GB Stachowiak GW Stachowiak 2001 The Effects of Particle Characteristics on Three-Body Abrasive Wear Wear 249 201 207 10.1016/S0043-1648(01)00557-9 1:CAS:528:DC%2BD3MXjsFaktLY%3D (Pubitemid 32546195)
19. WHO, Hazard Prevention and Control in the Work Environment: Airborne Particle, Prevention and Control Exchange (PACE), World Health Organization, WHO/SDE/OEH/99.14, Geneva, Switzerland, 1999, p 1-219
20. H Tönshoff B Karpuschewski T Glatzel 1997 Particle Emission and Emission in Dry Grinding Ann. CIRP 46 2 693 695 10.1016/S0007-8506(07)90007-4
21. V Songmene B Balout J Masounave 2008 Clean Machining: Experimental Investigation on Particle Formation, Part II: Influence of Machining Strategies and Drill Condition Int. J. Environ. Conscious Des. Manuf. (ECDM) 14 1 17 33
22. H.W. Rossmoore and L.A. Rossmoore, Effect of Microbial Growth Products on Biocide Activity in Metalworking Fluids, Symposium on Extra cellular Microbial Products in Bio-Deterioration, Vol 27(2), Apr 9-10, 1990, International Bio-deterioration, 1990, p 145-156
23. M Sondossi HW Rossmoore, et al. 2001 Relative Formaldehyde Resistance Among Bacterial Survivors of Biocide-Treated Metalworking Fluid Int. Biodeter. Biodegr. 48 1-4 286 300 10.1016/S0964-8305(01)00095-6 1:CAS:528: DC%2BD3MXnvFGrsL8%3D (Pubitemid 33107367)
24. D.K. Verma, D.S. Shaw, et al., An Evaluation of Analytical Methods, Air Sampling Techniques, and Airborne Occupational Exposure of MetalWorking Fluids, J. Occup. Environ. Hyg., 2006, 3, p 53-66
25. NOSH: National Institute for Occupational Safety and Health, Criteria for a Recommended Standard: Occupational Exposure to Metalworking Fluids, DHHS Pub. No. 98-102, NIOSH, Cincinnati, Ohio, 1998
26. JW Sutherland VN Kulur, et al. 2000 Experimental Investigation of Air Quality in Wet and Dry Turning CIRP Ann.-Manuf. Technol. 49 1 61 64 10.1016/S0007-8506(07)62896-0
27. I. Zaghbani, V. Songmene, and R. Khettabi, Fine and Ultra Fine Particle Characterisation and Modeling In High Speed Milling of 6061-T6 Aluminium Alloy, J. Mater. Eng. Perform., 2008, ASM International. doi: 10.1007/s11665-008-9265-x
28. B Balout V Songmene J Masounave 2007 An Experimental Study of Particle Generation During Dry Drilling of Pre-Cooled and Pre-Heated Workpiece Materials J. Manuf. Process. 9 1 23 34 10.1016/S1526-6125(07)70105-6
29. V Songmene B Balout J Masounave 2008 Clean Machining: Experimental Investigation on Particle Formation Part I: Influence of Machining Parameters and Chip Formation Int. J. Environ. Conscious Des. Manuf. (ECDM) 14 1 1 16
30. R Khettabi V Songmene J Masounave 2007 Effect of Tool Lead Angle and Chip Formation Mode on Particle Emission in Dry Cutting J. Mater. Process. Technol. 194 1-3 100 109 10.1016/j.jmatprotec.2007.04.005 1:CAS:528:DC%2BD2sXhtVGku73E
31. R. Khettabi, V. Songmene, and J. Masounave, Effects of Speeds, Materials and Tool Rake Angles on Metallic Particle Emission During Orthogonal Cutting, J. Mater. Eng. Perform., 2009, Accepted for Publication.
32. JRK Zipf ZT Bieniawski 1989 A Fundamental Study of Respirable Particle Generation in Coal Min. Sci. Technol. 9 1 87 99 10.1016/S0167-9031(89)90812-8 1:CAS:528:DyaL1MXmtFOjsL8%3D
33. SJ Page JA Organiscak 2004 Semi-Empirical Model for Predicting Surface Coal Mine Drill Respirable Particle Emission Int. J. Surf. Min. Reclam. Environ. 18 1 42 59 10.1076/ijsm.18.1.42.23546 (Pubitemid 38149836)
34. D Chen M Sarumi STS Al-Hassani 1998 Computational Mean Particle Erosion Model Wear 214 64 73 10.1016/S0043-1648(97)00210-X 1:CAS:528: DyaK1cXos1Ogug%3D%3D (Pubitemid 28203433)
35. Z Zhang L Zhang Y-W Mai 1994 Modelling Friction and Wear of Scratching Ceramic Particle-Reinforced Metal Composites Wear 176 231 237 10.1016/0043-1648(94)90151-1 1:CAS:528:DyaK2cXlvVGjtr4%3D (Pubitemid 284983)
36. E. Rabinowicz, Shape of Adhesive Wear Particles, ASME, New York, NY, USA, 1985, p 1377-1386
37. PL Ko SS Iyer H Vaughan M Gadala 2001 Finite element Modelling of Crack Growth and Wear Particle Formation in Sliding Contact Wear 250-251 1265 1278 10.1016/S0043-1648(01)00780-3
38. S.S. Akarca, W.J. Altenhof, and A.T. Alpas, Characterization and Modeling of Subsurface Damage in a 356 Aluminum Alloy Subjected to Multiple Asperity Sliding Contacts, Minerals, Metals and Materials Society, Warrendale, PA, USA, 2005, p 107-120
39. H.-W. Fang 2007 Characteristic Modeling of the Wear Particle Formation Process from a Tribological Testing of Polyethylene with Controlled Surface Asperities J. Appl. Polym. Sci. 103 587 594 10.1002/app.25210 1:CAS:528:DC%2BD28Xht1GrtbrL (Pubitemid 44832271)
40. H.-W. Fang, et al. 2006 Preparation of UHMWPE Particles and Establishment of Inverted Macrophage Cell Model to Investigate Wear Particles Induced Bioactivities J. Biochem. Biophys. Methods 68 175 187 10.1016/j.jbbm.2006.05.011 1:CAS:528:DC%2BD28XptVGntbY%3D 16859749 (Pubitemid 44292874)
41. S Rautio P Hynynen I Welling I Hemmil P Usenius A Narhi 2007 Modelling of Airborne Particle Emissions in CNC MDF Milling Holz als Roh- und Werkstoff 65 7 335 341 10.1007/s00107-007-0179-3 1:CAS:528:DC%2BD2sXhtVejtL7I (Pubitemid 47409708)
42. JQ Xie AE Bayoumi HM Zbib 1996 Study on Shear Banding in Chip Formation of Orthogonal Machining Int. J. Mach. Tools Manuf. 36 7 835 847 10.1016/0890-6955(95)00016-X (Pubitemid 126370653)
43. I. Zaghbani and V. Songmene, A Force-Temperature Model Including a Constitutive Equation for Dry and High Speed Milling of Aluminum Alloys, J. Mater. Process. Technol., 2008, doi: 10.1016/j.jmatprotec.2008.05.050
44. P.U. Arumugam, A.P. Malshe, S.A. Batzer, and D.G. Bhat, Study of Airborne Particle Emission and Process Performance During Dry Machining of Aluminum-Silicon Alloy with PCD and CVD Diamond Coated Tools NAMRC, May 21-24, 2002 (West Lafayette, ID), Society of Manufacturing Eng., MR02-153, 2002, p 1-8
45. J Palmqvist S Gustafsson 1999 Emission of Particle in Planning and Milling of Wood Holz Roh-Werkst 57 164 170 10.1007/s001070050035 1:CAS:528:DyaK1MXjvFCqt74%3D
46. PU Arumugam AP Malshe SA Batzer 2006 Dry Machining of Aluminium-Silicon Alloy Using Polished CVD Diamond-Coated Cutting Tools Inserts Surf. Coat. Technol. 200 11 3399 3403 10.1016/j.surfcoat.2005.08.127 1:CAS:528: DC%2BD28Xhs1yrtLg%3D (Pubitemid 43231180)
47. P. Atkins and J. de Paula, Physical Chemistry, 8th ed., W. H. Freeman and Company, New York, 2006
48. J Masounave Y Jallais J-M Welter 2007 Effect of Temperature on the Drilling of Brass and Aluminum Matériaux Tech. 95 331 342 10.1051/mattech:2008020 1:CAS:528:DC%2BD1cXhtFKitbbO
49. N. Tounsi, Analytical and Numerical Investigation of the Strain Rate Field in the Secondary Shear Zone, 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, 2005