Investigation of effect of the process parameters on kerf angle of the granite in abrasive waterjet cutting;Aşindirici su jeti ile kesmede çalişma parametrelerinin granit kerf açisina etkisnin araştirilmasi

Madencilik

Volumn 49, Issue 2, 2010, Pages 17-26

  Aydin, Gökhan ^a   Karakurt, Izzet ^a   Aydiner, Kerim ^b  

^a TRABZON   (Turkey)

^b TRABZON   (Turkey)

Author keywords

Abrasive water jet; Granite; Kerf angle; Kerf geometry

Indexed keywords

ABRASIVE SIZE; ABRASIVE WATER JET; ABRASIVE WATERJET CUTTING; CUTTING METHODS; EXPERIMENTAL STUDIES; KERF ANGLE; KERF GEOMETRY; MACHINING PROCESS; ORTHOGONAL EXPERIMENTAL DESIGN; PROCESS PARAMETERS; STANDOFF DISTANCE; TAGUCHI; TRAVERSE SPEED; WATER PRESSURES;

ABRASIVES; COMPUTATIONAL GEOMETRY; GRANITE; JETS; MACHINING;

ABRASIVE CUTTING;

ALUMINUM; FLUID PRESSURE; GEOMETRY; GRANITE; MACHINERY; ROCK; STEEL;

EID: 77955697565     PISSN: 00249416     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (30)

1. Akkurt, A., Külekçi, K. M., Seker, U. ve Ercan F., 2004; "Effect of Feed Rate on Surface Roughness in Abrasive Waterjet Cutting Applications", Journal of Materials Processing Technology, 147, 389-396.
2. Arola, D. and Ramulu, M., 1996; "A Study of Kerf Characteristics in Abrasive Water Jet Machining of Graphite/Epoxy Composite", J. Eng. Mater. Technol. 118(2), 256-265.
3. th International Symposium on Jet Cutting Technology", 4-6 October, Sendai - Japan.
4. Caniyilmaz E. ve Kutay, F., 2003; "Taguchi Metodunda Varyans Analizine Alternatif Bir Yaklaşim", Mühendislik Mimarlik Fakültesi Dergisi, Gazi Üniversitesi, 18(3), 51-63.
5. Chen, L., Siores, E. and Wong, W.C.K., 1996; "Kerf Characteristics in Abrasive Waterjet Cutting of Ceramic Materials", Int. J. Mach. Tools Manuf. 36, 1201-1206.
6. Colbourn, J.C. and Dinitz, J.H., 2001; "Mutually Orthogonal Latin Squares: A Brief Survey of Constructions", Journal of Statistical Planning and Inference, 95, 9-48.
7. Duflou, J.R., Kruth, J.P ve Bohez, E.L., 2001; "Contour Cutting of Pre-formed Parts with Abrasive Waterjet Using 3-axis Nozzle Control", Journal of Materials Processing Technology, 115, 38-43.
8. Ghandehari, M., Hatami, H. and Mahmoodian, E.S., 2005; "On the Size of the Minimum Critical Set of a Latin Square", Discrete Mathematics, 293, 121-127.
9. Gudimetla, P., Wang, J. ve Wong, W., 2002; "Kerf Formation Analysis in the Abrasive Waterjet Cutting of Industrial Ceramics", Journal of Materials Processing Technology, 128, 123-129.
10. Hagan, P.C., 1992; "The Cuttability of Rock Using a High Pressure Water Jet", The University of New South Wales (UNSW), Sydney, Australia.
11. Hashish, M. and Du Plessis, M.P., 1979; "Prediction Equations Relating High Velocity Jet Cutting Performance to Standoff Distance and Multiphases", Journal of Engineering for Industry, 101,311-318.
12. Karakurt, İ ve Aydiner, K., 2007; "Aşmdirici Su Jeti Kesme Sistemlerinin Kayaç Kesme Performanslari", Türkiye 20. Uluslararasi Madencilik Kongre ve Sergisi, 6-8 Haziran, Ankara, 127-134,.
13. Karakurt, L., Aydin, G. ve Aydiner, K., 2009; "Aşindirici Su Jeti Kesme Sistemlerinde Kesme Hizinin Kesme Performansina Etkisinin Araştirilmasi", Türkiye 21. Uluslararasi Madencilik Kongresi ve Sergisi, 6-8 Mayis, Antalya, 347-354,.
14. Kasman, Ş., 2009; "Lazer Mikro Işleme Parametrelerinin Yüzey Kalitesine Etkisinin Deney Tasarim Yöntemiyle Belirlenmesi", 5. Uluslararasi İleri Teknolojiler Sempozyumu, 13-15 Mayis, Karabük, Türkiye.
15. Külekçi, K.M. ve Akkurt, A., 2001; "Asindiricili Su Jeti Ile Kesilerek Eide Edilen Yüzey Kalitesinin Deǧerlendirilmesi" , Niģde Üniversitesi Mühendislik Bilimleri Dergisi, 5(2), 13-24.
16. Liu, H., 2004; "A Study of the Cutting Performance in Abrasive Waterjet Contouring of Alumina Ceramics and Associated Jet Dynamic Characteristics", PhD Thesis, School of Mechanical, Manufacturing and Medical Engineering, Queensland University of Technology.
17. Liu, Y. ve Chen, X., 2004; "A Study on The Abrasive Water Jet Cutting for Granite", Key Engineering Materials, 257-258, 527-532.
18. Miranda, M. R. ve Quintino, L., 2005; "Microstructural Study of Material Removal Mechanisms Observed in Abrasive Waterjet Cutting of Calcareous Stones", Materials Characterization, 54, 370-377.
19. Savaşkan, M., Taptik, Y. Ve Ürgen, M., 2004; "Deney Tasarimi Yöntemi ile Matkap Uçlarinda Performans Optimizasyonu", İTÜ Mühendislik Dergisi, 3(6), 117-128.
20. Shanmugam, D.K. and Masood, S.H., 2009; "An Investigation on Kerf Characteristics in Abrasive Waterjet Cutting of Layered Composites", J. Materials Proc. Tech., 209, 3887-3893.
21. Shanmugam, D.K., Chen, F.L., Siores, E., Brandt, M., 2002; "Comparative Study of Jetting Machining Technologies over Laser Machining Technology for Cutting Composite Materials", J.Composite Structures, 57, 289-296.
22. Shanmugam, D.K., J. Wang, and Liu, H., 2008; "Minimisation of Kerf Tapers in Abrasive Waterjet Machining of Alumina Ceramics Using a Compensation Technique", Int. J. Mach.Tools Manuf., 48, 1527-1534.
23. Wang, J., 1999; "Abrasive Waterjet Machining of Polymer Matrix Composites Cutting Performance, Erosive Process and Predictive Models", Int. Journal of Adv. Manufacture Tech. 15, 757-768.
24. Wang, J. and Guo, D.M., 2003; "The Cutting Performance in Multipass Abrasive Waterjet Machining of Industrial Ceramics", Journal of Materials Processing Technology, 133, 371-377.
25. Wang, J. and Liu, H., 2006; "Profile Cutting on Alumina Ceramics by Abrasive Waterjet, II. Cutting Performance Models", Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 220, 715-725.
26. th International Conference of Manufacturing Engineering, Chairns, Australia.
27. Xu, S. and Wang, J., 2006; "A Study of Abrasive Waterjet Cutting of Alumina Ceramics with Controlled Nozzle Oscillation", Int. Journal of Advanced Manufacture Tech., 27, 693-702.
28. Xu, S., 2005; "Modelling the Cutting Process and Cutting Performance in Abrasive Waterjet Machining with Controlled Nozzle Oscillation", PhD Thesis, School of Engineering Systems, Queensland University of Technology.
29. Yazicioǧlu, O., Kurt, M. ve Çetinkaya, Y.U., 1993; "Sert Parçalarin Kesilmesinde Basinçli Su Jetinin Kullanilmasi", 6. Makine Teorisi Sempozyumu, Eylül 1993, Trabzon.
30. Zeng, J. and Kim, T.J., 1996; "An Erosion Model in Polycrystalline Ceramics in Abrasive Waterjet Cutting", Wear, 193, 207-217.