Calculation of the acoustic noise spectrum of SRM using modal superposition

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 9, 2010, Pages 2939-2945

  Fiedler, Jens O ^a   Kasper, Knut A ^b   De Doncker, Rik W ^b  

^a WILO SE ^*  (Germany)

^b RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

Spectrum; stator eigen mode; switched reluctance machine (SRM); vibrations

Indexed keywords

ACOUSTIC NOISE SPECTRUM; EIGEN MODES; HARMONIC CONTENTS; MODAL SUPERPOSITION; RADIAL FORCES; SPECTRAL COMPOSITION; SPECTRUM; STATOR VIBRATION; SWITCHED RELUCTANCE MACHINE; VIBRATIONS;

ACOUSTIC IMPEDANCE; ACOUSTIC NOISE; SWITCHING SYSTEMS; UNDERWATER ACOUSTICS;

STATORS;

EID: 77955650070     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2046573     Document Type: Article

References (27)

1. B. Fahimi, "Control of vibration in switched reluctance drives," Ph.D. dissertation, Texas A&M Univ., College Station, TX, 1999.
2. J. Fiedler, "Design of low-noise switched reluctance drives," Ph.D. dissertation, RWTH Aachen Univ., Aachen, Germany, 2007.
3. P. Desai, M. Krishnamurthy, N. Schofield, and A. Emadi, "Novel switched reluctance machine configuration with higher number of rotor poles than stator poles: Concept to implementation," IEEE Trans. Ind. Electron., vol.57, no.2, pp. 649-659, Feb. 2010.
4. J. Mahn, D. Williams, P. Wung, G. Horst, J. Lloyd, and S. Randall, "Systematic approach toward studying noise and vibration in switched reluctance machines: Preliminary results," in Conf. Rec. IEEE IAS Annu. Meeting, 1996, pp. 779-785.
5. J. Li and Y. Cho, "Investigation into reduction of vibration and acoustic noise in switched reluctance motors in radial force excitation and frame transfer function aspects," IEEE Trans. Magn., vol.45, no.10, pp. 4664-4667, Oct. 2009.
6. Z. Tang, P. Pillay, Y. Chen, and A. M. Omekanda, "Prediction of electromagnetic forces and vibrations in SRMs operating at steady-state and transient speeds," IEEE Trans. Ind. Appl., vol.41, no.4, pp. 927-934, Jul./Aug. 2005.
7. W. Cai, P. Pillay, Z. Tang, and A. M. Omekanda, "Low-vibration design of switched reluctance motors for automotive applications using modal analysis," IEEE Trans. Ind. Appl., vol.39, no.4, pp. 971-977, Jul./Aug. 2003.
8. Z. Tang, P. Pillay, and A. M. Omekanda, "Vibration prediction in switched reluctance motors with transfer function identification from shaker and force hammer tests," IEEE Trans. Ind. Appl., vol.39, no.4, pp. 978-985, Jul./Aug. 2003.
9. J. Li, X. Song, and Y. Cho, "Comparison of 12/8 and 6/4 switched reluctance motor: Noise and vibration aspects," IEEE Trans. Magn., vol.44, no.11, pp. 4131-4134, Nov. 2008.
10. J. Sun, Q. Zhan, S. Wang, and Z. Ma, "A novel radiating rib structure in switched reluctance motors for low acoustic noise," IEEE Trans. Magn., vol.43, no.9, pp. 3630-3637, Sep. 2007.
11. F. Keddar, A. Kaddour, and A. Maache, "Analysis of the sound field emitted by a doubly salient switched reluctance motor using acoustic intensity measurement," in Proc. 32nd IEEE IECON, 2006, pp. 1453-1458.
12. K. Vijayakumar, R. Karthikeyan, S. Paramasivam, R. Arumugam, and K. Srinivas, "Switched reluctance motor modeling, design, simulation, and analysis: A comprehensive review," IEEE Trans. Magn., vol.44, no.12, pp. 4605-4617, Dec. 2008.
13. S. Lei and W. Jianhua, "Switched reluctance motor vibration prediction: From low frequency to high frequency," in Proc. IEEE IEMDC, 2009, pp. 971-978.
14. D. Panda and V. Ramanarayanan, "Reduced acoustic noise variable DCbus-voltage-based sensorless switched reluctance motor drive for HVAC applications," IEEE Trans. Ind. Electron., vol.54, no.4, pp. 2065-2078, Aug. 2007.
15. Q. Zhan, J. Sun, S. Wang, and K. Xin, "A fixed-frequency direct instantaneous torque control method of switched reluctance motor contributing to low vibration and acoustic noise," in Proc. 32nd IEEE IECON, 2006, pp. 1580-1585.
16. A. Yoshida, D. Tanaka, and I. Miki, "A study on the reduction of vibration and acoustic noise for switched reluctance motor," in Proc. 8th ICEMS, 2005, vol.1, pp. 520-523.
17. F.-C. Lin and S.-M. Yang, "An approach to producing controlled radial force in a switched reluctance motor," IEEE Trans. Ind. Electron., vol.54, no.4, pp. 2137-2146, Aug. 2007.
18. D. Cameron, J. Lang, and S. Umans, "The origin and reduction of acoustic noise in doubly salient variable-reluctance motors," IEEE Trans. Ind. Appl., vol.28, no.6, pp. 1250-1255, Nov. 1992.
19. J. Hendershot, "Causes and sources of audible noise in electrical motors," in Proc. 22nd Incremental Motion Control Syst. Devices Symp., 1993, pp. 259-270.
20. M. N. Anwar and O. Husain, "Radial force calculation and acoustic noise prediction in switched reluctance machines," IEEE Trans. Ind. Appl., vol.36, no.6, pp. 1589-1597, Nov./Dec. 2000.
21. W. Cai and P. Pillay, "Design and control of switched reluctance motors with low vibration and noise," in Proc. IEEE IEMDC, May 2007, vol.2, pp. 1324-1331.
22. J. Fiedler and R. De Doncker, "Simplified calculation of radial force spectrum in SRM for acoustic noise prediction in preliminary machine design," in Proc. IET PEMD Conf., 2006, pp. 216-220.
23. J. Fiedler, K. Kasper, and R. De Doncker, "Spectral composition of stator vibrations resulting from modal superposition in SRM," in Proc. IET PEMD Conf., 2006, pp. 652-656.
24. L. Cremer, M. Heckl, and E. Ungar, Structure-Borne Sound, 2nd ed. Berlin, Germany: Springer-Verlag, 1988.
25. L. Rayleigh, Theory of Sound, 2nd ed. London, U.K.: Macmillan, 1849.
26. P. Rasmussen, F. Blaabjerg, J. Pedersen, P. Kjaer, and T. Miller, "Acoustic noise simulation for switched reluctance motors with audible output," in Proc. Eur. Conf. Power Electron. Appl. (EPE), 1999. [CD ROM].
27. K. Kasper, S. Fingerhuth, M. Klemenz, J. Fiedler, R. De Doncker, and M. Vorländer, "Psychoacoustic quantities and their relevance for soundquality optimization of switched reluctance machines," in Proc. Eur. Conf. Power Electron. Appl. (EPE), 2005. [CD ROM].