Invariant based transversely-isotropic material and failure model for fiber-reinforced polymers

Computers, Materials and Continua

Volumn 16, Issue 1, 2010, Pages 25-49

  Vogler, M ^a   Ernst, G ^a   Rolfes, R ^a  

^a LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

Failure; Fracture energy; Shear nonlinearities; Transverse isotropy

Indexed keywords

COMPOSITE BEAM; CONSTITUTIVE FORMULATION; DAMAGE STATE; ENERGY FORMULATIONS; EXPERIMENTAL DATA; FAILURE; FAILURE CRITERIA; FAILURE MODEL; FAILURE SURFACE; FE ANALYSIS; FIBER FAILURES; FIBER REINFORCED POLYMERS; FINITE ELEMENT PROGRAMS; INTERNAL LENGTH; MATERIAL MODELS; MATERIAL NON-LINEARITY; MATERIAL SOFTENING; NON-LINEARITY; STRESS STATE; TRANSVERSE ISOTROPY; TRANSVERSELY ISOTROPIC MATERIALS; TRIAXIALITY;

BRIDGE DECKS; COMPUTER SIMULATION; FIBER REINFORCED PLASTICS; FIBERS; FINITE ELEMENT METHOD; FRACTURE ENERGY; POLYMERS; REINFORCED PLASTICS; USER INTERFACES;

FRACTURE;

EID: 77955640584     PISSN: 15462218     EISSN: 15462226     Source Type: Journal    
DOI: None     Document Type: Article

References (34)

1. Airbus (2006): Test results of L-angle 4-point bending tests. Technical report, ESWNG, Testing Technology Germany, Hamburg, 2006.
2. Allix, O.; Corigliano, A. (1999): Geometrical and interfacial non-linearities in the analysis of delamination in composites. International Journal of Solids and Structures, vol. 36, no. 15, pp. 2189 - 2216.
3. Allix, O.; Feissel, P.; Thévenet, P. (2003): A delay damage mesomodel of laminates under dynamic loading: Basic aspects and identification issues. Computers & Structures, vol. 81, no. 12, pp. 1177 - 1191.
4. Barbero, E. J.; Cortes, D. H. (2010): A mechanistic model for transverse damage initiation, evolution, and stiffness reduction in laminated composites. Composites Part B: Engineering, vol. 41, no. 2, pp. 124 - 132.
5. Boehler, J.(Ed): Applications of Tensor Functions in Solid Mechanics. CISM No. 292. Springer.
6. Camanho, P.; Dávila, C.; Moura, M. (2003): Numerical simulation of mixedmode progressive delamination in composite materials. Journal of Composite Materials, vol. 37, no. 16, pp. 1415 - 1438.
7. Cuntze, R.; Freund, A. (2004): The predictive capability of failure mode concept-based strength criteria for multidirectional laminates. In Hinton, M.; Kaddour, A.; Soden, P.(Eds): Failure criteria in fibre reinforced polymer composites: The World-Wide Failure Exercise, pp. 429-489. Elsevier Science, Oxford.
8. Duvaut, G.; Lions, J. (1976): Inequalities in Mechanics and Physics. Springer Verlag, Berlin.
9. Eidel, B. (2004): Anisotropic Inelasticity - Modelling, Simulation, Validation. PhD thesis, Fachbereich Bauingenieurwesen und Geodäsie, Technische Universität Darmstadt, 2004.
10. Ernst, G. (2009): Multiscale Analysis of Textile Composites -Stiffness and Strength-. PhD thesis, Leibniz Universität Hannover, 2009. Mitteilungen des Instituts für Statik und Dynamik der Leibniz Universität Hannover 10/2009.
11. Ernst, G.; Vogler, M.; Hühne, C.; Rolfes, R. (2010): Multiscale progressive failure analysis of textile composites. Composites Science and Technology, vol. 70, no. 1, pp. 61 - 72.
12. Hallett, S.; Green, B.; Jiang, W.; Wisnom, M. (2009): An experimental and numerical investigation into the damage mechanisms in notched composites. Composites Part A: Applied Science and Manufacturing, vol. 40, no. 5, pp. 613 - 624.
13. Hashin, Z. (1980): Failure Criteria for Unidirectional Fiber Composites. Journal of Applied Mechanics, vol. 47, pp. 329-334.
14. Hillerborg, A.; Modeer, M.; Petersson, P. E. (1976): Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research, vol. 6, pp. 773-782.
15. Hinton, M. J.; Kaddour, A. S.; Soden, P. D. (2004): Failure Criteria in Fibre Reinforced Polymer Composites: The World-Wide Failure Exercise. Elsevier Science, Oxford.
16. Knops, M. (2003): Sukzessives Bruchgeschehen in Faserverbundlaminaten. PhD thesis, Fakultät für Maschinenwesen der Rheinisch- Westfälischen Technischen Hochschule Aachen, 2003.
17. Krueger, R.; Paris, I. L.; O'Brien, T. K.; Minguet, P. J. (2002): Comparison of 2d finite element modeling assumptions with results from 3d analysis for composite skin-stiffener debonding. Composite Structures, vol. 57, no. 1-4, pp. 161 - 168.
18. Ladevèze, P.; Allix, O.; Deü, J.-F.; Lèvêque, D. (2000): A mesomodel for localisation and damage computation in laminates. Computer Methods in Applied Mechanics and Engineering, vol. 183, no. 1-2, pp. 105 - 122.
19. Maimí, P.; Camanho, P.; Mayugo, J.; Dávila, C. (2007): A continuum damage model for composite laminates: Part i - constitutive model. Mechanics of Materials, vol. 39, no. 10, pp. 897 - 908.
20. Maimí, P.; Camanho, P.; Mayugo, J.; Dávila, C. (2007): A continuum damage model for composite laminates: Part ii - computational implementation and validation. Mechanics of Materials, vol. 39, no. 10, pp. 909 - 919. (Pubitemid 46962125)
21. Maimí, P.; Mayugo, J. A.; Camanho, P. P. (2008): A three-dimensional damage model for transversely isotropic composite laminates. Composite Materials, vol. 42, no. 25/2008.
22. Nahas, M. N. (1986): Survey of Failure and Post-Failure Theories of Laminated Fiber-Reinforced Composites. Composites Technology & Research, vol. 8, no. 4, pp. 138-153.
23. Pinho, S.; Dávila, C.; Ianucci, L.; Robinson, P. (2004): Failure models and criteria for frp under in-plane or three-dimensional stress states including shear non-linearity. NASA/TM-2003-213530.
24. Puck, A. (1996): Festigkeitsanalyse von Faser-Matrix-Laminaten, Modelle für die Praxis. Hanser, München.
25. Puck, A.; Schneider, W. (1969): On failure mechanisms and failure criteria of filament-wound glass-fibre/resin composites. Plastics and Polymers, vol. 37, pp. 33-44.
26. Puck, A.; Schürmann, H. (2004): Failure analysis of FRP laminates by means of physically based phenomenological models. In Hinton, M. J.; Kaddour, A. S.; Soden, P. D.(Eds): Failure Criteria in Fibre Reinforced Polymer Composites: The World-Wide Failure Exercise, pp. 264-297. Elsevier Science, Oxford.
27. Rogers, T. (1987): Yield criteria, flow rules and hardening in anisotropic plasticity. In Boehler, J.(Ed): Yielding, damage and failure of anisotropic solids, volume 5, pp. 53-79. EGF Publication.
28. Rolfes, R.; Ernst, G.; Vogler, M.; Hühne, C. (2008): Material and failure models for textile composites. In Camanho, P. P.; Dávila, C. G.; Pinho, S. T.; Remmers, J.(Eds): Mechanical Response of Composites, volume 10 of Computational
29. Methods in Applied Sciences, pg. in print. Springer. ISBN: 978-1-4020-8583-3. Schröder, J. (1995): Theoretische und algorithmische Konzepte zur phänomenologischen Beschreibung anisotropen Materialverhaltens. PhD thesis, Universität Hannover, 1995.
30. Schuecker, C.; Pettermann, H. (2006): A continuum damage model for fiber reinforced laminates based on ply failure mechanisms. Composite Structures, vol. 76, no. 1-2, pp. 162 - 173. Fifteenth International Conference on Composite Materials - ICCM-15.
31. Spencer, A. (1987): Kinematic constraints, constitutive equations and failure rules for anisotropic materials. In Boehler, J.(Ed): Applications of Tensor Functions in Solid Mechanics, CISM No. 292, pp. 187-201. Springer.
32. Tsai, S. W.; Wu, E. M. (1971): A general theory of strength for anisotropic materials. Journal of Composite Materials, vol. 5, pp. 58-80.
33. Turon, A.; Camanho, P.; Costa, J.; Dávila, C. (2006): A damage model for the simulation of delamination in advanced composites under variable-mode loading. Mechanics of Materials, vol. 38, no. 11, pp. 1072 - 1089.
34. Turon, A.; Camanho, P.; Costa, J.; Renart, J. (2010): Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness. Composite Structures, vol. 92, no. 8, pp. 1857 - 1864.