Biaxial high cycle fatigue of a type 304L stainless steel: Cyclic strains and crack initiation detection by digital image correlation

European Journal of Mechanics, A/Solids

Volumn 29, Issue 5, 2010, Pages 810-825

  Poncelet, M ^a   Barbier, G ^b,d   Raka, B ^b   Courtin, S ^c   Desmorat, R ^b   Le Roux, J C ^d   Vincent, L ^a  

^a SRMA   (France)

^b CNRS   (France)

^c AREVA NP   (France)

^d EDF R AND D   (France)

Author keywords

Biaxial High Cycle Fatigue; Crack initiation; Digital image correlation; Stroboscopic image acquisition

Indexed keywords

304L STAINLESS STEEL; CONSTANT LOADS; CYCLIC STRAIN; DIGITAL IMAGE CORRELATIONS; EXPERIMENTAL PROTOCOLS; EXPERIMENTAL SETUP; FATIGUE CURVES; FATIGUE TESTS; FULL-FIELD STRAIN MEASUREMENT; HIGH CYCLE FATIGUE; HIGH CYCLE FATIGUE TEST; IN-SITU; LOAD RATIO; LOADING PATH; LOCAL STRAINS; MALTESE CROSS; MULTIAXIAL; MULTISCALES; NON-HOMOGENEOUS; NONPROPORTIONAL LOADING; NUMBER OF CYCLES; RATCHETTING; RESIDUAL STRAINS; ROOM TEMPERATURE; STRAIN AMPLITUDE; TESTING MACHINE; TIME HISTORY; TOTAL STRAIN;

AUSTENITIC STAINLESS STEEL; CRACK DETECTION; CRACK INITIATION; DIGITAL IMAGE STORAGE; FATIGUE OF MATERIALS; FATIGUE TESTING; IMAGE ACQUISITION; LOADING; STEEL TESTING; STRAIN MEASUREMENT; STRESS CORROSION CRACKING;

STRAIN;

EID: 77955469967     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.euromechsol.2010.05.002     Document Type: Article

References (69)

1. Akamatsu, M., Chevallier, E., 2001. Caractérisation chimique et mécanique des matériaux approvisionnés pour l'étude du comportement en fatigue des aciers inoxydables austénitiques, Technical note HT-42/00/020/A, EDF, R&D.
2. J.M.H. Andrew, and E.G. Ellison A testing rig for cycling at high biaxial strains J. Strain Anal. Eng. Des. Prof. Eng. Publ. 0309-3247 8 3 1973 2041 3130
3. Barbier, G., 2009. Fatigue biaxiale grand nombre de cycles: étude expérimentale, endommagement deux échelles probabiliste, PhD thesis, ENS Cachan.
4. S. Bari, and T. Hassan Anatomy of coupled constitutive models for ratchetting simulation Int. J. Plas. 16 2000 381 409
5. Bedkowski, W., 1994. Determination of critical plane and effort criterion in fatigue life evaluation for materials under multiaxial random loading. Experimental verification based on fatigue tests of cruciform specimens. Proceedings of the Fourth ICB/MF, May 31-June 3, 1994, Paris, pp. 435-447.
6. G. Besnard, F. Hild, and S. Roux "Finite-element" displacement fields analysis from digital images: application to Portevin-Le-Châtelier bands Exp. Mech. 46 6 2006 789 804
7. L. Bocher, P. Delobelle, P. Robinet, and X. Feaugas Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion-internal and external pressure Int. J. Plast. 17 2001 1491 1530
8. Bonnand, V., Chaboche, J.L., Cherouali, H., Gomez, P., Kanouté, P., Pacou, D., Paulmier, P., Ostoja-Kuczynski, E., Vogel, F., 2009. Experimental and theoretical comparison of some multiaxial fatigue design criteria in the context of life assessment of rotating parts in turboengines. In: ICAF 2009, Proceedings of the 25th Symposium of the International Committee on Aeronautica l Fatigue, Rotterdam, The Netherlands, 27-29 May 2009.
9. C. Bouvet, S. Calloch, and C. Lexcellent Mechanical behavior of a Cu-Al-Be shape memory alloy under multiaxial proportional and nonproportional loadings J. Eng. Mater. Technol. 124 2002 112
10. S. Calloch, and D. Marquis Triaxial tension - compression tests for multiaxial cyclic plasticity Int. J. Plast. 15 5 1999 521 549
11. J.L. Chaboche, and P.M. Lesne A non-linear continuous fatigue damage model Fatigue Fract. Eng. Mater. Struct. 11 1988 1 17
12. J.-L. Chaboche On some modifications of kinematic hardening to improve the description of ratchetting effects Int. J. Plast. 7 1991 661 678
13. S. Chapuliot, C. Gourdin, T. Payen, J.P. Magnaud, and A. Monavon Hydro-thermal-mechanical analysis of thermal fatigue in a mixing tee Nucl.r Eng. Des. 235 2005 575 596
14. E. Charkaluk, and A. Constantinescu An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron Mater. High Temp. 17 3 2000 373 380
15. P. Chellapandi, S.C. Chetal, and R. Baldev Thermal striping limits for components of sodium cooled fast spectrum reactors Nucl. Eng. Des. 239 12 2009 2754 2765
16. Cipiere, M.-F., Goltrant, O., 2002. Circuit RRA N4 - Incident de Civaux 1 - Endommagement par fatigue thermique de tuyauteries situées dans les zones de mélange, Fontevraud V, Contribution of material investigations to the resolution of problems encountered in PWR's, France, 23-27 September 2002.
17. J. Colin, A. Fatemi, and S. Taheri Fatigue behavior of stainless steel 304L including strain hardening, prestraining, and mean stress effects ASME J. Eng. Mat. Technol. 132 2010 Online
18. J. Cognard, V. Feuardent, and J.-M. Virely Integrated design and manufacturing in mechanical engineering. Section optimisation of a structure for biaxial mechanical tests P. Chedmail, 1997 Kluwer Academics
19. B. Crossland Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel Proceedings of the International Conference on Fatigue Metals Inst. Mech. Eng. 1956 138 149
20. K. Dang Van Sur la résistance la fatigue des métaux Technical Report 3me fascicule Sciences et techniques de l'armement, Mémorial de l'artillerie franaise 1973
21. K. Dang Van, and I. Papadopoulos High Cycle Metal Fatigue 1999 Springer New York
22. P. Delobelle, P. Robinet, and L. Bocher Experimental study and phenomenological modelization of Ratchet under uniaxial and biaxial loading on an austenitic stainless steel Int. J. Plast. 11 1995 295 330
23. Desmorat, R., Pauget, F., Sermage, J.-P., 2006. DAMAGE-2005: a post-processor for high cycle fatigue under complex thermomechanical loading, PVP 2006/ICPVT 11 - ASME Pressure Vessels and Piping Division Conference, Vancouver, BC, Canada, 23-27 July 2006.
24. R. Desmorat, A. Kane, M. Seyedi, and J.-P. Sermage Two scale damage model and related numerical issues for thermo-mechanical High Cycle Fatigue Eur. J. Mech. A/Solids 26 2007 909 935
25. DOC-DIY http://www.doc-diy.net/photo/shutter-lag/ 2010 (accessed 13.04.10)
26. C. Doudard, M. Poncelet, S. Calloch, C. Boue, F. Hild, and A. Galtier Determination of an HCF criterion by thermal measurements under biaxial cyclic loading Int. J. Fatigue 29 4 2007 748 757
27. G.H. Eichelmann, and F.C. Hull The effect of composition on the temperature of spontaneous transformation of austenite to martensite in 18.8 stainless steel Trans. ASM 45 1953 77
28. Faidy, C., Le Courtois, T., de Fraguier, E., Le Duff, J.A., Le Franois, A., Dechelotte, J., 2000. Thermal fatigue in French RHR system. In: International Conference on Fatigue of Reactor Components, Napa, California, USA, 31 July-2 August 2000.
29. A. Fatemi, and L. Yang Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials Int. J. Fatigue 20 1 1998 9 34
30. A. Fissolo, S. Amiable, O. Ancelet, F. Mermaz, J.M. Stelmaszyk, A. Constantinescu, C. Robertson, L. Vincent, V. Maillot, and F. Bouchet Crack initiation under thermal fatigue: An overview of CEA experience. Part I: thermal fatigue appears to be more damaging than uniaxial isothermal fatigue Int. J. Fatigue 31 3 2009 587 600
31. M. Gerland, R. Alain, B. Ait Saadi, and J. Mendez Low cycle fatigue behaviour in vacuum of a 316L-type austenitic stainless steel between 20 and 600 °C - part II: dislocation structure evolution and correlation with cyclic behaviour Mat. Sci. Eng. A 229 1997 68 86
32. R. Hamam, F. Hild, and S. Roux Stress intensity factor gauging by digital image correlation: application in cyclic fatigue Strain 43 2007 181 192
33. T. Itoh, M. Sakane, and M. Ohnami High temperature multiaxial low cycle fatigue of cruciform specimen J. Eng. Mater. Technol. 116 91 1994 90 98
34. J. Kaleta, and G. Zietek Representations of cyclic properties of austenitic steels with plasticity-induced martensitic transformation Fatigue Fract. Eng. Mater. Struct. 21 1998 955 964
35. N. Kimura, H. Miyakoshi, and H. Kamide Experimental investigation on transfer characteristics of temperature fluctuation from liquid sodium to wall in parallel triple-jet Int. J. Heat.Mass Transfer 50 2007 2024 2036
36. U. Kurpp, H.J. Christ, P. Lezuo, H.J. Maier, and R.G. Teteruk Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions Mater. Sci. Eng. A 319 21 2001 527 530
37. G. Lanza Strength of shafting subject to both twisting and bending Trans. ASME 8 1886 130
38. D. Lefebvre, C. Chebl, L. Thibodeau, and E. Khazzari A high-strain biaxial-testing rig for thin-walled tubes under axial load and pressure Exp. Mech. 23 4 1983 384 392
39. J. Lemaitre A Course on Damage Mechanics 1992 Springer-Verlag Berlin
40. J. Lemaitre, and I. Doghri Damage 90: a post-processor for crack initiation Comp. Methods Appl. Mech. Eng. 115 1994 197 232
41. J. Lemaitre, J.-P. Sermage, and R. Desmorat A two scale damage concept applied to fatigue Int. J. Fract. 97 1999 67 81
42. J. Lemaitre, J.L. Chaboche, A. Benallal, and R. Desmorat Mécanique des matériaux solides third ed. 2009 Dunod Paris
43. Le Roux, J.-C., 2004. Influence de paramtres métallurgiques et d'essai sur l'amorage des fissures de fatigue en déformation imposée des aciers inoxydables austénitiques, Projet t2-00-04 (domzone), Note EDF R&D HT-26/03/056/B.
44. S.S. Manson, and M. Hirschberg Fatigue: An Interdisciplinary Approach 1964 Syracuse University Press Syracuse, NY
45. J. Marin Résistance des métaux la fatigue par contraintes biaxiales J. Appl. Mech. 16 1949 383
46. W. Mason Alternating stress experiments Proc. Inst. Mech. Eng. 1 1917 187 190
47. McClaren, S.W., Terry, F.L., 1963. Characteristics of aerospace materials subjected to biaxial static and fatigue loading conditions. A.S.M.E. Paper 63-WA-315.
48. S. McNeill, W. Peters, and M. Sutton Estimation of stress intensity factor by digital image correlation Eng. Fract. Mech. 28 1 1987 101 112
49. Molinie, E., 2002. Caractéristiques des tronons RRA 900-1300 déposés: synthse et enseignements acquis, Fontevraud V. Contribution of materials investigations to the resolution of problems encountered in PWR's, France, 23-27 September 2002.
50. C. Müller-Bollenhagen, M. Zimmermann, and H.-J. Christ Very high cycle fatigue behaviour of austenitic stainless steel and the effect of strain-induced martensite Int. J. Fatigue 32 6 2010 936 942
51. National Instrument, NI LabVIEWTM Version 5.1, User's Manual 1999 http://www.ni.com
52. N. Ohno, and J.D. Wang Kinematic hardening rules with critical state of dynamic recovery, part I and II Int. J. Plast. 9 1993 375 403
53. Otin, S., Desmorat, R., Bambrine, B., 2007. Incremental damage laws for design of turbomachines, ICNM 5 - Fifth International Conference on Nonlinear Mechanics, Shangai, China, 11-14 June 2007, pp. 221-227.
54. E. Paffumi, K.-F. Nilsson, and N.G. Taylor Simulation of thermal fatigue damage in a 316L model pipe component Int. J. Press. Vess. Piping 85 2008 798 813
55. K. Pascoe, and J. De Villiers Low cycle fatigue of steels under biaxial straining J. Strain Anal. 2 2 1967 117 126
56. L. Portier, S. Calloch, D. Marquis, and P. Geyer Ratchetting under tension-torsion loadings: experiments and modelling Int. J. Plast. 16 2000 303 335
57. Renault, A., 2006. Technical Note, FdE, LA2M2006-007 AT MET DT 345.
58. Rupil, J., Malésys, N., Vincent, L., Hild, F., 2009. Contribution of mechanical fatigue experiments to the improvement of a probabilistic model for the formation of crack networks under thermal fatigue. In: Proceeding of ESMC 2009, Electronic Version.
59. Sermage, J.-P., 1998. Fatigue thermique multiaxiale température variable. PhD thesis, Université Pierre et Marie Curie Paris, 6 pp.
60. J.-P. Sermage, J. Lemaitre, and R. Desmorat Multiaxial creep fatigue under anisothermal conditions Fatigue. Fract. Eng. Mater. Struct. 23 3 2000 241 252
61. E. Shiratori, and K. Ikegami A new biaxial tensile testing machine with flat specimen Bull. Tokyo Inst. Technol. 82 1967 105 118
62. G. Sines Behavior of metals under complex static and alternating stresses G. Sines, J.L. Waisman, 1959 McGraw-Hill New York 145 169
63. Solomon, H.D., Amzallag, C., Delair, R.E., Vallee, A.J., 2004. Strain controlled fatigue of type 304L SS in air and PWR. In: Third International Conference on Fatigue of Reactors Components, Seville 3-6 October 2004.
64. Stephan, J.-M., Curtit, F., Vindeirinho, C., Taheri, S., Akamatsu, M., Peniguel, C., 2002. Evaluation of the risk of damages in mixing zones: EDF R&D program, ASME PVP Conference, Canada, Vancouver, 4-8 August 2002.
65. J. Stolarz, N. Baffie, and T. Magnin Fatigue short crack behavior in metastable austenitic stainless steels with different grain sizes Mater. Sci. Eng. A 319 21 2001 521 526
66. S. Vanlanduit, J. Vanherzeele, R. Longo, and P. Guillaume A digital image correlation method for fatigue test experiments J. Opt. Las. Eng. 47 2009 371 378
67. Vincent, L., Perez, G., 2005. Etude de la fatigue d'un acier inoxydable austénitique aux faibles niveaux de chargement. Rapport d'avancement n°3. CEA Tech. Report, DMN/SRMA/LC2M/NT/2005-2742/A.
68. W. Weibull A statistical distribution function of wide applicability ASME J. Appl. Mech. 18 3 1951 293 297
69. I. Wilson, and D. White Cruciform specimens for biaxial fatigue tests: an investigation using finite-element analysis and photoelasticcoating techniques J. Strain Anal 6 1 1971 27 37