Anode side diffusion barrier coating for solid oxide fuel cells interconnects

Journal of Fuel Cell Science and Technology

Volumn 7, Issue 3, 2010, Pages 0310201-0310207

  Froitzheim, J ^a   Niewolak, L ^a   Brandner, M ^b   Singheiser, L ^a   Quadakkers, W J ^a  

^a FORSCHUNGSZENTRUM JÜLICH   (Germany)

^b Innovation Services   (Austria)

Author keywords

[No Author keywords available]

Indexed keywords

ANODE SIDE; AREA-SPECIFIC RESISTANCES; BARRIER LAYERS; BARRIER PROPERTIES; COPPER LAYER; DIFFUSION BARRIER COATINGS; DIFFUSION BARRIER LAYERS; DIRECT CONTACT; ELECTRONIC CONDUCTIVITY; INTER-DIFFUSION; LONG TERM EXPOSURE; METALLIC SUBSTRATE; OXIDE SCALE; PRE-OXIDATION; SPUTTERED COATINGS; STEEL SURFACE; VOID FORMATION;

CERIUM COMPOUNDS; DIFFUSION BARRIERS; DIFFUSION COATINGS; ELECTROMIGRATION; FERRITE; METALLIC COMPOUNDS; SCALE (DEPOSITS); SOLID OXIDE FUEL CELLS (SOFC); STEEL METALLOGRAPHY; SUBSTRATES;

FERRITIC STEEL;

EID: 77955437629     PISSN: 1550624X     EISSN: 15516989     Source Type: Journal    
DOI: 10.1115/1.3182731     Document Type: Article

References (31)

1. Quadakkers, W. J., Piron-Abellan, J., Shemet, V, and Singheiser, L., 2003, "Metallic Interconnectors for Solid Oxide Fuel Cells-A Review", Mater. High. Temp., 20(2), pp. 115-127.
2. Konysheva, E., Laatsch, J., Wessel, E., Tietz, F., Christiansen, N., Singheiser, L., and Hilpert, K., 2006, "Influence of Different Perovskite Interlayers on the Electrical Conductivity Between La0.65Sr03MnO3 and Fe/Cr-Based Steels", Solid State Ionics, 177 (9-10), pp. 923-930.
3. Yang, Z., Xia, G.-G., Maupin, G. D., and Stevenson, J. W., 2006, "Conductive Protection Layers on Oxidation Resistant Alloys for SOFC Interconnect Applications", Surf. Coat. Technol., 201(7), pp. 4476-4483.
4. Franco, T., Ruckdäschel, R., Lang, M., Schiller, G., and Szabo, P., 2006, Diffusion and Protecting Barrier Layers in a Substrate Supported SOFC Concept, Lucerne, European Fuel Cell Forum.
5. Brandner, M., 2006, "Herstellung einer Metall/Keramik- Verbundstruktur für Hochtemperaturbrennstoffzellen in mobilen Anwendungen", Berichte des Forschungszentrums Jülich Report No. JUEL-4238.
6. Brandner, M., Bram, M., Sebold, D., Uhlenbruck, S., Ertl, S. T., Höfler, T., Wetzel, F J., Buchkremer, H. P., and Stöver, D., 2005, Inhibition of Diffusion Between Metallic Substrates and Ni-YSZ-Anodes During Sintering (Proceedings of the Electrochemical Society, PV 2005-07), S. C. Singhal and J. Mizusaki, eds., The Electrochemical Society, Pennington, NJ, pp. 1235-1243.
7. Visco, S. J., Jacobson, C. P., Villareal, I., Leming, A., Matus, Y., and Jonghe, L. C. D., 2003, Inhibition of Diffusion Between Metallic Substrates and Ni-YSZ-Anodes During Sintering (Proceedings of the Electrochemical Society, PV 2003-07), S. C. Singhal and M. Dokiya, eds., The Electrochemical Society, Pennington, NJ, pp. 1040-1050.
8. Singhal, S. C, and Kendall, K., 2006, High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, Elsevier, Oxford, UK.
9. Pirón Abellán, F J., and Quadakkers, W. J., 2005, "Development of Ferritic Steels for Application as Interconnect Materials for Intermediate Temperature Solid Oxide Fuel Cells (SOFCs)", Berichte des Forschungszentrums Jülich Report No. JUEL-4170.
10. Fu, Q. X., Tietz, F, and Stöver, D., 2006, "La04Sr0.6Ti1-xMnxO3 Perovskites as Anode Materials for Solid Oxide Fuel Cells", J. Electrochem. Soc, 153(4), pp. D74-D83.
11. Holt, A., and Kofstad, P., 1994, "Electrical Conductivity and Defect Structure of Cr2O3. II. Reduced Temperatures (< ∼ 1000°C)", Solid State Ionics, 69(2), pp. 137-143.
12. Hui, S., and Petric, A., 2001, "Conductivity and Stability of SrVO3 and Mixed Perovskites at Low Oxygen Partial Pressures", Solid State Ionics, 143 (3-4), pp. 275-283.
13. Hui, S., and Petric, A., 2002, "Electrical Properties of Yttrium-Doped Strontium Titanate Under Reducing Conditions", J. Electrochem. Soc, 149(1), pp. J1-J10.
14. Hui, S., and Petric, A., 2002, "Electrical Conductivity of Yttrium-Doped SrTiO3: Influence of Transition Metal Additives", Mater. Res. Bull., 37(7), pp. 1215-1231.
15. Kolodiazhnyi, T., and Petric, A., 2005, "The Applicability of Sr-Deficient n-Type SrTiO3 for SOFC Anodes", J. Electroceram., 15(1), pp. 5-11.
16. Marina, O. A., Canfield, N. L., and Stevenson, J. W., 2002, "Thermal, Electrical, and Electrocatalytical Properties of Lanthanum-Doped Strontium Titanate", Solid State Ionics, 149 (1-2), pp. 21-28.
17. Marucco, J. F, Gautron, J., and Lemasson, P., 1981, " Thermogravimetric and Electrical Study of Non-Stoichiometric Titanium Dioxide TiO2-x, Between 800 and 1100°C", J. Phys. Chem. Solids, 42(5), pp. 363-367.
18. Naik, I. K., and Tien, T. Y, 1978, "Small-Polaron Mobility in Nonstoichiometric Cerium Dioxide", J. Phys. Chem. Solids, 39(3), pp. 311-315.
19. Sakai, N., Horita, T., Xiong, Y P., Yamaji, K., Kishimoto, H., Brito, M. E., Yokokawa, H., and Maruyama, T., 2005, "Structure and Transport Property of Manganese-Chromium-Iron Oxide as a Main Compound in Oxide Scales of Alloy Interconnects for SOFCs", Solid State Ionics, 176 (7-8), pp. 681-686.
20. Tuller, H. L., and Nowick, A. S., 1979, "Defect Structure and Electrical Properties of Nonstoichiometric CeO2 Single Crystals", J. Electrochem. Soc, 126(2), pp. 209-217.
21. Mogensen, M., Sammes, N. M., and Tompsett, G. A., 2000, "Physical, Chemical and Electrochemical Properties of Pure and Doped Ceria", Solid State Ionics, 129 (1-4), pp. 63-94.
22. Chen, X., Hou, P. Y, Jacobson, C. P., Visco, S. J., and De Jonghe, L. C, 2005, "Protective Coating on Stainless Steel Interconnect for SOFCs: Oxidation Kinetics and Electrical Properties", Solid State Ionics, 176 (5-6), pp. 425-433.
23. Ertl, S., 2006, "Untersuchung zur oxidationsbedingten Lebensdauer von Chromstählen für die Anwendung in der Hochtemperaturbrennstoffzelle (SOFC)", Ph. D. thesis, RWTH, Aachen, Germany.
24. Huczkowski, P., and Quadakkers, W. J., 2007, "Effect of Geometry and Composition of Cr Steels on Oxide Sale Properties Relevant for Interconnector Applications in Solid Oxide Fuel Cells (SOFCs)", Report Forschungszentrums Jülich, Reihe Energietechnik/Energy Technology, Vol. 65.
25. Froitzheim, J., 2008, "Ferritic Steel Interconnectors and Their Interactions With Ni Base Anodes in Solid Oxide Fuel Cells (SOFC)", Ph. D. thesis, RWTH, Aachen, Germany.
26. Niewolak, L., Quadakkers, W. J., and Singheiser, L., 2006, "Interconnector for a Fuel Cell Stack, and Method for Production", Deutsche Patentanmeldung DE 10 2006 024 039 A1.
27. Zhou, X.-D., Huebner, W., and Anderson, H. U., 2005, "Size Effect on the Electronic Properties of Doped and Undoped Ceria", Defect Diffus. Forum, 242-244, pp. 277-289.
28. Powell, C. F, Oxley, J. H., and Blocher, J. M., 1966, Vapor Deposition (The Electrochemical Society Series), Wiley, New York.
29. Huang, K., Hou, P. Y, and Goodenough, J. B., 2000, "Characterization of Iron-Based Alloy Interconnects for Reduced Temperature Solid Oxide Fuel Cells", Solid State Ionics, 129 (1-4), pp. 237-250.
30. Lu, F.-H., Newhouse, M. L., Dieckmann, R., and Xue, J., 1995, "Platinum-A Non-Inert Material Reacting With Oxides", Solid State Ionics, 75, pp. 187-192.
31. Shemet, V., 2007, Forschungszentrum Jülich, unpublished.