Manufacturing of high-temperature polymer electrolyte membranes-part I: System design and modeling

Journal of Fuel Cell Science and Technology

Volumn 7, Issue 1, 2010, Pages 0110071-0110079

  Harris, Tequila A L ^a   Walczyk, Daniel F ^b   Weber, Mathias M ^c  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^c BASF Fuel Cell   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CATASTROPHIC FAILURES; DESIGN METHODOLOGY; FUEL CELL COMPONENTS; HIGH TEMPERATURE POLYMERS; MANUFACTURING CHALLENGES; MANUFACTURING SYSTEM; MEMBRANE ELECTROLYTES; PIN HOLES; POWER LAW FLUID; SYSTEM DESIGN; TIME-TEMPERATURE;

DESIGN; FAILURE ANALYSIS; FUEL CELLS; POLYELECTROLYTES;

MANUFACTURE;

EID: 77955302136     PISSN: 1550624X     EISSN: 15516989     Source Type: Journal    
DOI: 10.1115/1.3119055     Document Type: Article

References (44)

1. Baker, R., 2000, Membrane Technology and Applications, McGraw-Hill, New York.
2. Mehta, V., and Cooper, J., 2003, "Review and Analysis of PEM Fuel Cell Design and Manufacturing," J. Power Sources, 114, pp. 32-53.
3. Department of Energy (DoE), 2005, "Manufacturing Research & Development of PEM Fuel Cell Systems for Transportation Applications," Background Material for the Manufacturing R&D Workshop, Jul.
4. Rensselaer Polytechnic Institute, 2007, http://rpifuelcell. eventurestudio.com/optional/index.cfm.
5. Appleby, A. J., 1996, "Erratum to Issues in Fuel Cell Commercialization," J. Power Sources, 58, pp. 153-176.
6. 2 Fuel Cell Using Acid Doped Polybenzimidazole as Polymer Electrolyte," Electrochim. Acta, 41, pp. 193-197. (Pubitemid 126349339)
7. Giordano, N., Staiti, P., Hocevar, S., and Arico, S., 1996, "High Performance Fuel Cell Based on Phosphotungstic Acid as Proton Conducting Electrolyte," Electrochim. Acta, 41, pp. 397-403.
8. Kreuer, K. D., 1997, "On the Development of Proton Conducting Materials for Technological Applications," Solid State Ionics, 97, pp. 1-15.
9. Savadogo, O., and Xing, B., 2000, "Hydrogen/Oxygen Polymer Electrolyte Membrane Fuel Cell (PEMFC) Based on Acid-Doped Polybenzimidazole (PBI)," J. New Mater. Electrochem. Syst., 3, pp. 345-349.
10. Alberti, G., Casciola, M., Massinelli, L., and Bauer, B., 2001, "Polymeric Proton Conducting Membranes for Medium Temperature Fuel Cells (110-160°C)," J. Membr. Sci., 185, pp. 73-81.
11. Perry, M. L., and Fuller, T. F., 2002, "A Historical Perspective of Fuel Cell Technology in the 20th Century," J. Electrochem. Soc., 149, pp. S59-S67.
12. Nakajima, H., Nomura, S., Sugimoto, T., Nishikawa, S., and Honma, I., 2002, "High Temperature Proton Conducting Organic/Inorganic Nanohybrids for Polymer Electrolyte Membrane," J. Electrochem. Soc., 149, pp. A953-A959.
13. Xiao, L., 2003, "Novel Polybenzimidazole Derivatives for High Temperature Polymer Electrolyte Membrane Fuel Cell Applications," doctoral thesis, Rensselaer Polytechnic Institute, Troy, NY.
14. Johnson, A., and Flori, A., 2001, "High Density and Fine Feature Solder Paste Printing," Proceedings of APEX.
15. Sandia National Laboratory, 2004, "Sandia Polymer Electrolyte Membrane Brings Goal of a High Temperature PEM Fuel Cell Closer," available at http:// www.sandia.gov/news-center/news-releases/2004/renew-energy-batt/ microfuel.html.
16. Glenn Research Center, 2004, "Polymer Membranes for High-Temperature PEM Fuel Cells and Solid Polymer Batteries," Article No. M-1406-1413, available at http://technology.grc.nasa.gov/tops/TOP300178.pdf.
17. Zawodzinski, T., 2004, "High Temperature Polymer Membranes for Fuel Cells," available at www.eere.energy.gov/hydrogenandfuelcells/pdfs/ review04/fc-6-zawodzinski.pdf.
18. Xiao, L., Zhang, H., Jana, T., Scanlon, E., Chen, R., Choe, E.-W., Ramanathan, L., Yu, S., and Benicewicz, B. C., 2005, "Synthesis and Characterization of Pyridine-Based Polybenzimidazoles for High Temperature Polymer Electrolyte Membrane Fuel Cell Applications," Fuel Cells, 5(2), pp. 287-295.
19. BASF, 2007, www.basf.com/fuelcell.
20. DuPont, 2007, http://www.dupont.com/fuelcells/products/nafion.html.
21. Harris, T. A. L., 2006, "Design Methodology, Science, And Technology To Manufacture High Temperature Polymer Electrolyte Membranes For Fuel Cells," Ph.D. thesis, Rensselaer Polytechnic Institute, Troy, NY.
22. Harris, T., Walczyk, D., O'Donnell, R. and Puffer, R., 2004, "Design of an Experimental Test Bed for Depositing Membrane Material for High Temperature Fuel Cells," Trans. NAMRI/SME, 32, pp. 431-438.
23. Chong, J., 1997, "Coating Weight Uniformity and Die Internal Design," J. Imaging Sci. Technol., 41(1), pp. 41-47.
24. Curtin, D., and Howard, E., Jr., 2003, U.S. Patent No. 6,552,093.
25. Solvay Solexis, 2007, http://www.solvaysolexis.com/producthide/0,45065-2- 10,00.htm.
26. W. L. Gore, 2007, http://www.gore.com/en-x/products/electronic/fuelcells/ index.html.
27. Asahi Glass, 2007, http://www.agc.co.jp/english/products/products-4.html.
28. Polyfuel, 2007, http://www.polyfuel.com/technology/direct-methanol- fuelcell-membrane.html.
29. Fumatech, 2007, http://www.fumatech.com/EN/Company/Products-andservices.
30. Lousenberg, D., Henry, T., Curtin, D., Tisack, M., and Tangeman, P., 2003, Differentiated Membranes and Dispersions for Commercial PEM Fuel Cell and Electrolysis Systems, Fuel Cell Seminar, DuPont-Fayetteville Works, Fayetteville, NC.
31. Carlson, E. J., Kopf, P., Sinha, J., Sriramulu, S., and Yang, Y., 2005, "Cost Analysis of PEM Fuel Cell," National Renewable Energy Laboratory (NREL), Systems for Transportation, Report No. NREL/SR-560-39104.
32. Harris, T. A., and Walczyk, D. F., 2006, "Development of a Casting Technique for Membrane Material Used in High Temperature PEM Fuel Cells," J. Manuf. Process., 8(1), pp. 8-20.
33. Chhabra, R., and Richardson, J., 1999, Non-Newtonian Flow in the Process Industries, Butterworth-Heinemann, Oxford.
34. Extrusion Die Industries, LLC, 2006, www.extrusiondies.com.
35. Skelland, A. H. P., 1967, Non-Newtonian Flow and Heat Transfer, Wiley, New York.
36. Metzner, A. B., and Reed, J., 1955, "Flow of Non-Newtonian Fluids Correlation of the Laminar, Transition, and Turbulent-Flow Regions," AIChE J., 1, pp. 434-440.
37. Kittridge, C. P., and Rowley, D. S., 1957, "Resistance Coefficients for Laminar and Turbulent Flow Through One-Half Inch Valves and Fittings," Trans. ASME, 79, pp. 1759-1766.
38. Geankoplis, C., 1993, Transport Processes and Unit Operations, 3rd ed., Prentice-Hall, Englewood Cliffs, NJ, p. 94.
39. Wen, S., and Liu, T., 1995, "Extrusion Die Design for Multiple Stripes," Polym. Eng. Sci., 35, pp. 759-767.
40. Weinstein, S. J., and Ruschak, K. J., 1996, "Asymptotic Analysis of Die Flow for Shear-Thinning Fluids," AIChE J., 42(6), pp. 1501-1513.
41. Yuan, S., 1995, "A Flow Model for Non-Newtonian Liquids Inside a Slot Die," Polym. Eng. Sci., 35, pp. 577-586.
42. Leonard, W., 1985, "Inertial and Gravitational Effects in Extrusion Dies for Non-Newtonian Fluids," Polym. Eng. Sci., 25(9), pp. 570-576.
43. Jeong, K., and Oh, B., 2002, "Fuel Economy and Life-Cycle Cost Analysis of a Fuel Cell Hybrid Vehicle," J. Power Sources, 105, pp. 58-65.
44. Penner, S., Appleby, A., Baker, B., Bates, J., Buss, L., Dollard, W., Farris, P., Gillis, E., Gunsher, J., Khankar, A., Krumpelt, M., O'Sullivan, J., Runte, G., Savinell, R., Selman, J., Shores, D., and Tarman, P., 1995, "Commercialization of Fuel Cells," Prog. Energy Combust. Sci., 21, pp. 145-151.