Self-reinforced poly(ethylene terephthalate) composites by hot consolidation of Bi-component PET yarns

Composites Part A: Applied Science and Manufacturing

Volumn 41, Issue 8, 2010, Pages 964-972

  Zhang, Jian Min ^a   Peijs, Ton ^a,b  

^a QUEEN MARY UNIVERSITY OF LONDON   (United Kingdom)

^b EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Mechanical properties; Polymer fibre; Recycling; Self reinforced polymer composites; Thermoplastic resin

Indexed keywords

COMBINED PROCESS; CONSOLIDATION TEMPERATURE; COPOLYESTERS; INTERFACIAL ADHESIONS; INTERFACIAL PROPERTY; MULTIFILAMENT YARNS; PET COMPOSITES; POLYMER COMPOSITE; POLYMER FIBRE; POLYMER FIBRES; PROCESSING PARAMETERS; RECYCLABILITY; SELF REINFORCED; SELF-REINFORCED POLYMERS; SKIN-CORE; THERMOPLASTIC RESIN; VOID CONTENTS; WELD HIGH-STRENGTH;

AGRICULTURAL PRODUCTS; ETHYLENE; FILAMENT WINDING; HOT PRESSING; MECHANICAL PROPERTIES; NANOFIBERS; ORGANIC POLYMERS; POLYMERS; PRESSURE EFFECTS; RECYCLING; REINFORCED PLASTICS; RESINS; TENSILE PROPERTIES;

POLYETHYLENE TEREPHTHALATES;

EID: 77955281342     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2010.03.012     Document Type: Article

References (59)

1. N.J. Capiati, and R.S. Porter The concept of one polymer composites modelled with HDPE J Mater Sci 10 10 1975 1671 1677
2. T. He, and R.S. Porter Melt transcrystallization of polyethylene on high modulus polyethylene fibers J Appl Polym Sci 35 7 1988 1945 1953
3. J.M. Zhang, C.T. Reynolds, and T. Peijs All-poly(ethylene terephthalate) composites by film stacking of oriented tapes Composites Part A 40 11 2009 1747 1755
4. F. Von Lacroix, M. Werwer, and K. Schulte Solution impregnation of polyethylene fiber polyethylene matrix composites Compos Part A - Appl Sci Manuf 29 4 1998 371 376
5. F. Von Lacroix, H.Q. Lu, and K. Schulte Wet powder impregnation for polyethylene composites: preparation and mechanical properties Compos Part A - Appl Sci Manuf 30 3 1999 369 373
6. P.J. Hine, I.M. Ward, R.H. Olley, and D.C. Bassett The hot compaction of high modulus melt-spun polyethylene fibres J Mater Sci 28 2 1993 316 324
7. I.M. Ward, and P.J. Hine The science and technology of hot compaction Polymer 45 5 2004 1413 1427
8. T. Peijs Composites for recyclability Mater Today 6 4 2003 30 35
9. J.M. Zhang, Z. Mousavi, N. Soykeabkaew, P. Smith, T. Nishino, and T. Peijs All-aramid composites by partial fiber dissolution ACS Appl Mater Interf 2 3 2010 919 926
10. C. Qin, N. Soykeabkaew, N. Xiuyuan, and T. Peijs The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites Carbohydr Polym 71 3 2008 458 467
11. N. Soykeabkaew, N. Arimoto, T. Nishino, and T. Peijs All-cellulose composites by surface selective dissolution of aligned ligno-cellulosic fibres Compos SciTechnol 68 10-11 2008 2201 2207
12. Directive 2000/53/EC of the European Parliament and of the Council of on end-of-life vehicles; Directive 2002/96/EC of the European Parliament and of the Council of on waste electrical and electronic equipment; Directive 2002/95/EC of the European Parliament and of the Council of on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
13. L.E. Govaert, E.L.J.C.J. Dhooghe, and A.A.J.M. Peijs A micromechanical approach to the viscoelasticity of unidirectional hybrid composites Composites 22 2 1991 113 119
14. L.E. Govaert, C.W.M. Bastiaansen, and P.J.R. Leblans Stress-strain analysis of oriented polyethylene Polymer 34 3 1993 534 540
15. L.E. Govaert, and T. Peijs Tensile-strength and work of fracture of oriented polyethylene fiber Polymer 36 23 1995 4425 4431
16. P.J. Hine, I.M. Ward, and J. Teckoe The hot compaction of woven polypropylene tapes J Mater Sci 33 11 1998 2725 2733
17. M.I. Abo El-Maaty, D.C. Bassett, R.H. Olley, P.J. Hine, and I.M. Ward The hot compaction of polypropylene fibers J Mater Sci 31 5 1996 1157 1163
18. J. Teckoe, R.H. Olley, D.C. Bassett, P.J. Hine, and I.M. Ward The morphology of woven polypropylene tapes compacted at temperatures above and below optimum J Mater Sci 34 9 1999 2065 2073
19. N.D. Jordan, D.C. Bassett, R.H. Olley, P.J. Hine, and I.M. Ward The hot compaction behaviour of woven oriented polypropylene fibres and tapes II. Morphology of cloths before and after compaction Polymer 44 4 2003 1133 1143
20. P.J. Hine, I.M. Ward, N.D. Jordan, R.H. Olley, and D.C. Bassett The hot compaction behaviour of woven oriented polypropylene fibres and tapes I. Mechanical properties Polymer 44 4 2003 1117 1131
21. < www.curvonline.com/ >.
22. I.M. Ward, and P.J. Hine Novel composites by hot compaction of fibers Polym Eng Sci 37 11 1997 1809 1814
23. P.J. Hine, R.H. Ey, and I.M. Ward The use of interleaved films for optimising the production and properties of hot compacted, self reinforced polymer composites Compos Sci Technol 68 6 2008 1413 1421
24. B. Alcock, N.O. Cabrera, N.M. Barkoula, J. Loos, and T. Peijs The mechanical properties of unidirectional all-polypropylene composites Compos Part A - Appl Sci Manuf 37 5 2006 716 726
25. B. Alcock, N.O. Cabrera, N.M. Barkoula, J. Loos, and T. Peijs Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all-polypropylene composites J Appl Polym Sci 104 1 2007 118 129 (Pubitemid 46426321)
26. B. Alcock, N.O. Cabrera, N.M. Barkoula, C.T. Reynolds, L.E. Govaert, and T. Peijs The effect of temperature and strain rate on the mechanical properties of highly oriented polypropylene tapes and all-polypropylene composites Compos Sci Technol 67 10 2007 2061 2070 (Pubitemid 46682053)
27. B. Alcock, N.O. Cabrera, N.M. Barkoula, A.B. Spoelstra, J. Loos, and T. Peijs The mechanical properties of woven tapes all-polypropylene composites Compos Part A - Appl Sci Manuf 38 2007 147 161
28. B. Alcock, N.O. Cabrera, N.M. Barkoula, Z. Wang, and T. Peijs The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites Compos Part B - Eng 39 3 2008 537 547
29. N.M. Barkoula, B. Alcock, N.O. Cabrera, and T. Peijs Fatigue properties of highly oriented polypropylene tapes and all-polypropylene composites Polym Polym Compos 16 2 2008 101 113
30. N.M. Barkoula, T. Peijs, T. Schimanski, and J. Loos Processing of single polymer composites using the concept of constrained fibres Polym Compos 26 1 2005 114 120
31. N. Cabrera, B. Alcock, J. Loos, and T. Peijs Processing of all-polypropylene composites for ultimate recyclability Proc Inst Mech Eng Part L - J Mater - Des Appl 218 L2 2004 145 155
32. N.O. Cabrera, B. Alcock, E.T.J. Klompen, and T. Peijs Filament winding of co-extruded polypropylene tapes for fully recyclable all-polypropylene composite products Appl Compos Mater 15 1 2008 27 45
33. N.O. Cabrera, B. Alcock, and T. Peijs Design and manufacture of all-PP sandwich panels based on co-extruded polypropylene tapes Compos Part B - Eng 39 7-8 2008 1183 1195
34. N. Cabrera, C.T. Reynolds, B. Alcock, and T. Peijs Non-isothermal stamp forming of continuous tape reinforced all-polypropylene composite sheet Compos Part A - Appl Sci Manuf 39 9 2008 1455 1466
35. B. Alcock, N. Cabrera, N.M. Barkoula, and T. Peijs Direct forming of all-polypropylene composites products from fabrics made of co-extruded tapes Appl Compos Mater 2009
36. www.pure-composites.com/.
37. T.N. Abraham, S.D. Wanjale, T. Bárány, and J. Karger-Kocsis Tensile mechanical and perforation impact behavior of all-PP composites containing random PP copolymer as matrix and stretched PP homopolymer as reinforcement: Effect of β nucleation of the matrix Compos Part A - Appl Sci Manuf 40 5 2009 662 668
38. H.H. Yang Aromatic high-strength fibers 1989 Wiley
39. A. Saalbrink, M. Mureau, and T. Peijs Blends of poly(ethylene terephthalate) and epoxy as matrix material for continuous fibre reinforced composites Plast Rubber Compos 30 5 2001 213 221
40. T. Loontjens, K. Pauwels, F. Derks, M. Neilen, C.K. Sham, and M. Serne The action of chain extenders in nylon-6, PET, and model compounds J Appl Polym Sci 65 9 1997 1813 1819
41. B. Duh Effect of antimony catalyst on solid-state polycondensation of poly(ethylene terephthalate) Polymer 43 11 2002 3147 3154
42. Y. Ma, U.S. Agarwal, D.J. Sikkema, and P.J. Lemstra Solid-state polymerization of PET: influence of nitrogen sweep and high vacuum Polymer 44 15 2003 4085 4096
43. J. Rasburn, P.J. Hine, I.M. Ward, R.H. Olley, D.C. Bassett, and M.A. Kabeel The hot compaction of polyethylene terephthalate J Mater Sci 30 3 1995 615 622
44. P.H. Hine, and I.M. Ward Hot compaction of woven poly(ethylene terephthalate) multifilaments J Appl Polym Sci 91 4 2003 2223 2233
45. P.W.J. van den Heuvel, B. Hogeweg, and T. Peijs An experimental and numerical investigation into the single-fibre fragmentation test: stress transfer by a locally yielding matrix Compos Part A - Appl Sci Manuf 28 3 1997 237 249
46. P.J. Holdsworth, and A. Turner-Jones Melting behaviour of heat crystallized poly(ethylene terephthalate) Polymer 12 3 1971 195 208
47. B.D. Agarwal, and L.J. Broutman Analysis and performance of fiber composites 2nd ed. 1990 Wiley New York; Chichester p. 576 [SPE monographs, 0195-4288]
48. A. Peterlin Molecular model of drawing polyethylene and polypropylene J Mater Sci 6 6 1971 490 508
49. M.I. Abo El-Maaty, R.H. Olley, and D.C. Bassett On the internal morphologies of high-modulus polyethylene and polypropylene fibres J Mater Sci 34 9 1999 1975 1989
50. W. Wenig, and R. Hammel Optical properties and structure of drawn polyethylene terephthalate-polyethylene films Colloid Polym Sci 260 1 1982 31 36
51. B. Alcock, N.O. Cabrera, N.M. Barkoula, and T. Peijs The effect of processing conditions on the mechanical properties and thermal stability of highly oriented PP tapes Eur Polym J 45 10 2009 2878 2894
52. M.S. Madhukar, and L.T. Drzal Fiber-matrix adhesion and its effect on composite mechanical properties.2. Longitudinal (0-degrees) and transverse (90-degrees) tensile and flexure behavior of graphite epoxy composites J Compos Mater 25 8 1991 958 991
53. T. Peijs, H.A. Rijsdijk, J.M.M. de Kok, and P.J. Lemstra The role of interface and fibre anisotropy in controlling the performance of polyethylene-fibre-reinforced composites Compos Sci Technol 52 3 1994 449 466
54. R.W. Venderbosch, T. Peijs, H.E.H. Meijer, and P.L. Lemstra Fibre-reinforced composites with tailored interphases using PPE/epoxy blends as a matrix system Compos Part A - Appl Sci Manuf 27 9 1996 895 905
55. P.W.J. van den Heuvel, T. Peijs, and R.J. Young Failure phenomena in two-dimensional multi-fibre microcomposites. 2. A Raman spectroscopic study of the influence of inter-fibre spacing on stress concentrations Compos Sci Technol 57 8 1997 899 911
56. P.W.J. van den Heuvel, T. Peijs, and R.J. Young Failure phenomena in two-dimensional multi-fibre microcomposites. 3. A Raman spectroscopy study of the influence of interfacial debonding on stress concentrations Compos Sci Technol 58 6 1998 933 944
57. T. Abraham, K. Banik, and J. Karger-Kocsis All-PP composites (PURE) with unidirectional and cross-ply lay-ups: dynamic mechanical thermal analysis Exp Polym Lett 1 8 2007 519 526
58. < www.matweb.com >.
59. < http://www2.dupont.com/Plastics/en-US/ >.