A review on the preload technology of the rolling bearing for the spindle of machine tools

International Journal of Precision Engineering and Manufacturing

Volumn 11, Issue 3, 2010, Pages 491-498

  Hwang, Young Kug ^a   Lee, Choon Man ^a  

^a Changwon National University   (South Korea)

Author keywords

Constant pressure preload; Fixed position preload; Machine tool spindle; Preload technology of rolling bearing; Variable preload

Indexed keywords

EID: 77955249367     PISSN: 12298557     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12541-010-0058-4     Document Type: Review

References (50)

1. Marsh, E. R., "Precision Spindle Metrology," DEStech Publications, Lancaster, 2008.
2. Harris, T. A., "Rolling Bearing Analysis," Taylor & Francis, 2007.
3. Harnoy, A., "Bearing Design in Machinery," Marcel Dekker, pp. 418-436, 2003.
4. Dornfeld, D. and Lee, D. E., "Precision Manufacturing," Springer, pp. 1-48, 121-166, 2008.
5. Lacey, S., Kawamura, H. and Ohura, Y., "Bearings for aircraft gas turbine engines-part 1," Motion & Control of NSK, No. 5, pp. 1-8, 1998.
6. Takii, H., "Trends of rolling bearing performance and recent results," Koyo Engineering Journal, No. 163E, pp. 10-16, 2003.
7. Hagiu, G. D., "Reliable high speed spindles by optimum bearings preload," Internal Journal of Applied Mechanics and Engineering, Vol. 8, No. 1, pp. 57-70, 2003.
8. Hagiu, G. D. and Gafitanu, M. D., "Preload optimization: a high efficiency design solution for grinding machines main spindles," ASTM Special Technical Publication, No. 1247, pp. 74-84, 1995.
9. Hagiu, G. D. and Gafitanu, M. D., "Preload-service life correlation for ball bearings on machine tool main spindles," Wear, Vol. 172, No. 1, pp. 79-83, 1994.
10. Hagiu, G. D. and Gafitanu, M. D., "Dynamic characteristics of high speed angular contact ball bearings," Wear, Vol. 211, No. 1, pp. 22-29, 1997.
11. Hagiu, G. D. and Dragan, B., "Feed-back preload systems for high speed rolling bearings assemblies," The Analysis of University Dunarea de Jos of Galati Fascicle VIII, pp. 43-47, 2004.
12. Zverev, I. A., Eun, I. U., Hwang, Y. K., Chung, W. J. and Lee, C. M., "An elastic deformation model of high speed spindle units," Int. J. Precis. Eng. Manuf., Vol. 7, No. 3, pp. 39-46, 2006.
13. Tu, J. F. and Stein, J. L., "Active thermal preload regulation for machine tool spindles with rolling element bearings," Journal of Manufacturing Science and Engineering, Vol. 118, No. 4, pp. 499-505, 1996.
14. Lin, C. W., Tu, J. F. and Kamman, J., "An integrated thermo mechanical dynamic model to characterize motorized machine tool spindles during very high speed rotation," International Journal of Machine Tools and Manufacture, Vol. 43, No. 10, pp. 1035-1050, 2003.
15. Jiang, S. and Mao, H., "Investigation of variable optimum preload for a machine tool spindle," International Journal of Machine Tools & Manufacture, Vol. 50, No. 1, pp. 19-28, 2010.
16. Kim, C. H. and Choi, D. H., "A study on the determination of the optimal preload about the miniature ball bearing for the VHS VTR head drum assembly," Transactions of the Korean Society of Mechanical Engineers, Vol. 15, No. 2, pp. 703-10, 1991.
17. Song, C. K. and Shin, Y. J., "Effect of preload on running accuracy of high speed spindle," Transactions of the Korean Society of Machine Tool Engineers, Vol. 11, No. 2, pp. 65-70, 2002.
18. Khonsari, M. M. and Booser, E. R., "Bearing Design and Lubrication," John Wiley and Sons, 2001.
19. Asano, K., "Recent development in numerical analysis of rolling bearings basic technology series of bearings," Koyo Engineering Journal, No. 160E, pp. 65-70, 2002.
20. Yoon, K. C., "Design methods of application-based exclusive ball bearings using genetic algorithms," Ph.D. Dissertation, Mechanical Design Engineering, Hanyang University, 2000.
21. SKF, "Catalogue-high precision bearings," 2005.
22. NSK, "Catalogue-super precision bearing," 2006.
23. Momono, T. and Noda, B., "Sound and vibration in rolling bearings," Motion & Control of NSK, No. 6, pp. 29-37, 1999.
24. Juvinall, R. C. and Marshek, K. M., "Fundamentals of Machine Component Design," John Wiley & Sons, Chapter 14, 2000.
25. Yu, W. K., "A new stress-based fatigue life model for rolling bearings," Ph.D. Dissertation, Mechanical Engineering, Pennsylvania State University, 1999.
26. Kim, T. W. and Cho, Y. J., "Stress based fatigue life prediction for ball bearing," Journal of the Korean Society for Precision Engineering, Vol. 24, No. 5, pp. 44-55, 2007.
27. Filiz, I. H. and Gorur, G., "Analysis of preloaded bearings under combined axial and radial loading," Internal Journal of Machine Tools and Manufacturer, Vol. 34, No. 1, pp. 1-11, 1994.
28. Kim, W. D. and Han, D. C., "Prediction of the fatigue life of deep groove ball bearing under radial and moment loads-fatigue life tests and proposal of the life adjustment factors," Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 12, pp. 3149-3158, 1994.
29. Kim, T. W., Yoon, K. C. and Cho, Y. J., "Design of shoulder height for ball bearing using contact analysis," Journal of the KSTLE, Vol. 24, No. 5, pp. 228-233, 2008.
30. Takemura, H., Matsumoto, Y. and Murakami, Y., "Development of new life equation for ball and roller bearings," Motion & Control of NSK, No. 11, pp. 1-10, 2001.
31. Urakami, S. and Takemura, H., "Development of NSK ABLE forecaster," Motion & Control of NSK, No. 15, pp. 5-9, 2003.
32. Zaretsky, E. V., Poplawski, J. V. and Miller, C. R., "Rolling bearing life prediction-past, present, and future," NASA/TM 2000-210529, 2000.
33. Vlcek, B. L., Hendricks, R. C. and Zaretsky, E. V., "Determination of rolling-element fatigue life from computer generated bearing tests," NASA/TM 2003-212186, 2003.
34. Zaretsky, E. V., Vlcek, B. L. and Hendricks, R. C., "Effect of silicon nitride balls and rollers on rolling bearing life," NASA/TM 2005-213061, 2005.
35. Harris, T. A. and Barnsby, R. M., "Life ratings for ball and roller bearings," Proceedings of the Institution of Mechanical Engineers Part J, Vol. 215, pp. 577-595, 2001.
36. Zaretsky, E. V., "Comparison of life theories for rolling element bearings," NASA Technical Memorandum 106585, 1995.
37. Hong, J. P., "Mechanical Design," Bookshill, pp. 428-508, 2005.
38. Research Report of the Korea Institute of Machinery and Materials, "Study of the clearance control for high speed spindle bearing and optimization of spindle cooling system," M1-0105-00-0049, pp. 15-17, 2004.
39. IBAG Switzerland AG, http://www.ibag.ch
40. Kim, J. H., "Development of piezoactuator using three dimensional bridge type hinge mechanism," Ph.D. Dissertation, Mechanical Engineering, Korea Advanced Institute of Science and Technology, 2003.
41. Park, G., Bement, M. T., Hartman, D. A., Smith, R. E. and Farrar, C. R., "The use of active materials for machining processes: a review," International Journal of Machine Tools & Manufacture, Vol. 47, No. 15, pp. 2189-2206, 2007.
42. Lee, H. J., "Application of controllers with time delay estimation to an SMA actuator," Ph.D. Dissertation, Mechanical Engineering, Korea Advanced Institute of Science and Technology, 2003.
43. Tsutsui, S., Aoyama, T. and Inasaki, I., "Development of a spindle system with an adjustable preload mechanism using a piezoelectric actuator," The Japan Society of Mechanical Engineers, Vol. 31, No. 3, pp. 593-597, 1988.
44. Chen, J. S. and Chen, K. W., "Bearing load analysis and control of a motorized high speed spindle," International Journal of Machine Tools & Manufacture, Vol. 45, No. 12-13, pp. 1487-1493, 2005.
45. Nye, T. W., "Active control of bearing preload using piezoelectric translators," NASA Technical Report N90-22098, pp. 259-271, 1990.
46. Kitamura, K. and Taniguchi, K., "Preload control apparatus for bearings with shape memory alloy springs," United States Patent, No. 5094551, 1992.
47. GMN Paul Müller Industrie GmbH & Co. KG, http://www.gmn.de
48. Hwang, Y. K. and Lee, C. M., "Development of automatic variable preload device for spindle bearing by using centrifugal force," International Journal of Machine Tools & Manufacture, Vol. 49, No. 10, pp. 781-787, 2009.
49. Hwang, Y. K. and Lee, C. M., "Development of a newly structured variable preload control device for a spindle rolling bearing by using an electromagnet," Internal Journal of Machine Tools & Manufacture, Vol. 50, No. 3, pp. 253-259, 2010.
50. Tsuneyoshi, T., "Spindle preload measurement and analysis," Proc. of 2007 ASPE Summer Topical Meeting, 2007.