Cooling rate in 800 to 500°C range from dimensional analysis

Science and Technology of Welding and Joining

Volumn 15, Issue 5, 2010, Pages 423-427

  Arora, A ^a   Roy, G G ^b   Debroy, T ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

ARC WELDING; COOLING RATE; DIMENSIONLESS CORRELATION; LASER WELDING; STEELS

Indexed keywords

ARC-WELDING; CONVECTIVE HEAT TRANSFER; COOLING RATES; DIMENSIONAL ANALYSIS; DIMENSIONLESS CORRELATION; FLUID FLOW MODELS; HEAT CONDUCTION EQUATIONS; LASER WELDING; MATERIAL PROPERTY; OPERATING PARAMETERS; STEEL WELDS; STRUCTURE AND PROPERTIES; WELDING CONDITIONS; WELDING PROCESS;

ELECTRIC ARC WELDING; FLOW OF FLUIDS; LASER BEAM WELDING; MATHEMATICAL TECHNIQUES;

COOLING;

EID: 77955184904     PISSN: 13621718     EISSN: 13621718     Source Type: Journal    
DOI: 10.1179/136217110X12720264008394     Document Type: Article

References (25)

1. H. K. D. H. Bhadeshia, L. E. Svensson and B. Gretoft: 'A model for the development of microstructure in low-alloy steel (Fe-Mn- Si-C) weld deposits', Acta Metall., 1985, 33, 1271-1283. (Pubitemid 15567706)
2. H. Fredriksson and J. Stjerndahl: 'Solidification of iron-base alloys', Met. Sci., 1982, 16, 575-585.
3. N. S. Boulton and H. F. L. Martin: 'Residual stresses in arc welded plates', Proc. Inst. Mech. Eng., 1936, 133, 295-339.
4. L. E. Svensson, B. Gretoft and H. K. D. H. Bhaseshia: 'An analysis of cooling curves from the fusion zone of steel weld deposits', Scand. J. Metall., 1986, 15, 97-103. (Pubitemid 16587165)
5. C. L. Jenney and A. O'Brien (eds.): in 'Welding handbook', 9th edn, Vol.1, 'Welding science and technology', 100; 2001, Miami, FL, American Welding Society.
6. D. Rosenthal: 'The theory of moving sources of heat and its application to metal treatment', Trans. ASME, 1946, 68, 819-866.
7. W. Zhang, C. H. Kim and T. DebRoy: 'Heat and fluid flow in complex joints during gas-metal arc welding - Part I: Numerical model of fillet welding', J. Appl. Phys., 2004, 95, (9), 5210-5219.
8. W. Zhang, C. H. Kim and T. DebRoy: 'Heat and fluid flow in complex joints during gas-metal arc welding - Part II: Application to fillet welding of mild steel', J. Appl. Phys., 2004, 95, (9), 5220-5229.
9. X. He, J.W. Elmer and T. DebRoy: 'Heat transfer and fluid flow in laser microwelding', J. Appl. Phys., 2005, 97, (8), 084909. (Pubitemid 40914284)
10. S. Mishra and T. DebRoy: 'A heat transfer and fluid flow based model to obtain a specific weld geometry through multiple paths', J. Appl. Phys., 2005, 98, (4), 044902.
11. A. De and T. DebRoy: 'Reliable calculations of heat and fluid flow during conduction mode laser welding through optimization of uncertain parameters', Weld. J., 2005, 84, (7), 101S-112S. (Pubitemid 41028043)
12. A. Arora, G. G. Roy and T. DebRoy: 'Unusual wavy weld pool boundary', Scr. Mater., 2009, 60, 68-71.
13. O. Grong: 'Metallurgical modeling of welding', 5; 1994, London, The Institute of Materials.
14. V. Streeter and E. Wylie: 'Fluid mechanics', 8th edn, 164-172; 1985, New York, McGraw-Hill.
15. H. Cerjak and E. Letofsky: Proc. 5th Int. Conf. on 'Trends in welding research', (ed. M. Vitek et al.), 143-148; 1999, Pine Mountain, GA, ASM International.
16. Z. Yang and T. DebRoy: 'Modeling of macro- and microstructures of gas-metal-arc welded HSLA-100 steel', Metall. Mater. Trans. B, 1999, 30B, 483-493.
17. H. G. Svoboda, N. M. R. de Rissone, L. F. G. de Souza, D. B. Santos and I. de S. Bott: Proc. 8th Int. Conf. on 'Trends in welding research', (ed. S. A. David et al.), 154-158; 2009, Pine Mountain, GA, ASM International.
18. A. Kumar, W. Zhang, C. H. Kim and T. DebRoy: 'A Smart Bidirectional Model of Heat Transfer and Free Surface Flow in Gas Metal Arc Fillet Welding for Practising Engineers', Weld. World, 2005, 49, (9), 32-48. (Pubitemid 41686087)
19. L. Depradeux and J. F. Jullien: in 'Mathematical modeling of welding of weld phenomena 7', (ed. H. Cerjak), 269-294; 2005, London, Institute of Materials, Minerals and Mining.
20. J. Amanie, I. N. A. Oguocha and S. Yannacopoulos: Proc. 8th Int. Conf. on 'Trends in welding research', (ed. S. A. David et al.), 491- 501; 2009; Pine Mountain, GA, ASM International.
21. W. Zhang, J. W. Elmer and T. DebRoy: 'Modeling and real time mapping of phases during GTA welding of 1005 steel', Mater. Sci. Eng. A, 2002, A333, (1-2), 320-335. (Pubitemid 34789127)
22. G. T. Krause: 'Heat flow and cooling rates in submerged arc welding', MSc thesis, The Ohio State University, Columbus, OH, USA, 1978.
23. A. Kumar and T. DebRoy: 'Heat transfer and fluid flow during gas-metal-arc fillet welding for joint configurations and welding positions', Metall. Mater. Trans. A, 2007, 38A, 506-519. (Pubitemid 46951359)
24. R. Rai, J. W. Elmer, T. A. Palmer and T.DebRoy: 'Heat transfer and fluid flowduring keyhole mode laser welding of tantalum, Ti-6Al-4V, stainless steel and vanadium', J. Phys. D, 2007, 40D, 5753-5766. (Pubitemid 47354068)
25. A. Robert and T. DebRoy: 'Geometry of laser spot welds from dimensionless numbers',Metall.Mater. Trans. B, 2001, 32B, 941-947. (Pubitemid 33120310)