Three-dimensional semiperiodic line contact-periodic in contact length direction

Journal of Tribology

Volumn 131, Issue 2, 2009, Pages 1-8

  Liu, Shuangbiao ^a   Hua, Diann Y ^a  

^a CATERPILLAR INC   (United States)

Author keywords

Elastic contact; FFT based algorithms; Textured surface

Indexed keywords

COMPUTATIONAL DOMAINS; CONTACT LENGTH; CONTACT PRESSURES; CONTACT WIDTH; DISCRETE CONVOLUTION; ELASTIC CONTACT; FAST FOURIER TRANSFORM ALGORITHM; FFT ALGORITHM; GRID SIZE; IN-DEPTH INVESTIGATION; INFLUENCE COEFFICIENT; LINE CONTACT; ORDERS OF MAGNITUDE; PLANE-STRAIN; REDUCED SIZE; ROLLER FOLLOWER; SURFACE GEOMETRIES; TEXTURED SURFACE; THREE-DIMENSIONAL DISPLACEMENTS; THREE-DIMENSIONAL MODELING; TWO-DIMENSIONAL EQUATIONS;

CONVOLUTION; FAST FOURIER TRANSFORMS; SPUR GEARS; SURFACE ROUGHNESS; SURFACES; THREE DIMENSIONAL; TWO DIMENSIONAL; WAVELET TRANSFORMS;

ALGORITHMS;

EID: 77955117835     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.3084237     Document Type: Article

References (40)

1. Hua, D. Y., Farhang, K., and Seitzman, L. E., 2007, "A Multi-Scale System Analysis and Verification for Improved Contact Fatigue Life Cycle of a Cam-Roller System,"ASME J. Tribol., 129, pp. 321-325.
2. Hooke, C. J., and Li, K. Y., 2006, "Validation of the Stress Predictions in Rolling EHL Contacts Having In-Line Roughness Using the Inverse Method,"ASME J. Tribol., 128, pp. 745-752.
3. ASTM G133-05, Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
4. ASTM D2714-94, Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
5. Dowson, D., and Higginson, G. R., 1977, Elastohydrodynamic Lubrication, Pergamon, New York.
6. Webster, M. N., and Sayles, R. S., 1986, "A Numerical Model for the Elastic Frictionless Contact of Real Rough Surfaces,"ASME J. Tribol., 108, pp. 314-320.
7. Ju, Y., and Farris, T. N., 1996, "Spectral Analysis of Two-Dimensional Contact Problems,"ASME J. Tribol., 118, pp. 320-328.
8. Mihailidis, A., Bakolas, N., and Drivakos, N., 2001, "Subsurface Stress Field of a Dry Line Contact,"Wear, 249, pp. 546-556.
9. Bucher, F., Knothe, K., and Theiler, A., 2002, "Normal and Tangential Contact Problem of Surfaces With Measured Roughness,"Wear, 253, pp. 204-218.
10. Yang, P., Wang, J., and Kaneta, M., 2006, "Thermal and Non-Newtonian Numerical Analyses for Starved EHL Line Contacts,"ASME J. Tribol., 128, pp. 282-290.
11. Gupta, P. K., and Walowit, J. A., 1974, "Contact Stresses Between an Elastic Cylinder and a Layered Elastic Solid,"ASME J. Lubr. Technol., 96, pp. 250-257.
12. Merriman, T., and Kannel, J., 1989, "Analyses of the Role of Surface Roughness on Contact Stresses Between Elastic Cylinders With and Without Soft Surface Coating,"ASME J. Tribol., 111, pp. 87-94.
13. Cole, S. J., and Sayles, R. S., 1992, "A Numerical Model for the Contact of Layered Elastic Bodies With Real Rough Surfaces,"ASME J. Tribol., 114, pp. 334-340.
14. Elsharkawy, A. A., and Hamrock, B. J., 1993, "A Numerical Solution for Dry Sliding Line Contact of Multilayered Elastic Bodies,"ASME J. Tribol., 115, pp. 237-245.
15. Goryacheva, I., Sadeghi, F., and Nickel, D. A., 1996, "Internal Stresses in Contact of a Rough Body and a Viscoelastic Layered Semi-Infinite Plane,"ASME J. Tribol., 118, pp. 131-136.
16. Mao, K., Sun, Y., and Bell, T., 1996, "A Numerical Model for the Dry Sliding Contact of Layered Elastic Bodies With Rough Surfaces,"Tribol. Trans., 39, pp. 416-424.
17. Mao, K., Bell, T., and Sun, Y., 1997, "Effect of Sliding Friction on Contact Stresses for Multi-Layered Elastic Bodies With Rough Surfaces,"ASME J. Tribol., 119, pp. 476-480.
18. Ramachandra, S., and Ovaert, T. C., 2000, "Effect of Coating Geometry on Contact Stresses in Two-Dimensional Discontinuous Coating,"ASME J. Tribol., 122, pp. 665-671.
19. Kadiric, A., Sayles, R. S., Zhou, X. B., and Ioannides, E., 2003, "A Numerical Study of the Contact Mechanics and Sub-Surface Stress Effects Experienced Over a Range of Machined Surface Coatings in Rough Surface Contacts,"ASME J. Tribol., 125, pp. 720-730.
20. Stephens, L. S., Liu, Y., and Meletis, E. I., 2000, "Finite Element Analysis of the Initial Yielding Behavior of a Hard Coating/Substrate System With Functionally Graded Interface Under Indentation and Friction,"ASME J. Tribol., 122, pp. 381-387.
21. Luo, J. F., Liu, Y. J., and Berger, E. J., 2000, "Interfacial Stress Analysis for Multi-Coating Systems Using an Advanced Boundary Element Method,"Comput. Mech., 24, pp. 448-455.
22. Dong, C., and Bonnet, M., 2002, "An Integral Formulation for Steady-state Elastoplastic Contact Over a Coated Half-plane,"Comput. Mech., 28, pp. 105-121.
23. Saizonou, C., Kouitat-Njiwa, R., and von Stebut, J., 2002, "Surface Engineering With Functionally Graded Coatings: A Numerical Study Based on the Boundary Element Method,"Surf. Coat. Technol., 153, pp. 290-297.
24. Yang, J., and Komvopoulos, K., 2004, "Dynamic Indentation of an Elastic-Plastic Multi-Layered Medium by a Rigid Cylinder,"ASME J. Tribol., 126, pp. 18-27.
25. Mostofi, A., and Gohar, R., 1983, "Elastohydrodynamic Lubrication of Finite Line Contacts,"ASME J. Lubr. Technol., 105, pp. 598-604.
26. Chen, X. Y., 1993, Isothermal Elastohydrodynamic Lubrication of Finite Line Contacts, Zhejiang University, Hangzhou, China (in Chinese).
27. Park, T. J., and Kim, K. W., 1998, "Elastohydrodynamic Lubrication of a Finite Line Contact,"Wear, 223, pp. 102-109.
28. Liu, X., and Yang, P., 2002, "Analysis of the Thermal Elastohydrodynamic Lubrication of a Finite Line Contact,"Tribol. Int., 35, pp. 137-144.
29. Kushwaha, M., Rahnejat, H., and Gohar, R., 2002, "Aligned and Misaligned Contacts of Rollers to Races in Elastohydrodynamic Finite Line Conjunctions,"Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 216, pp. 1051-1070.
30. Francisco, A., Frene, J., and Blouin, A., 2002, "Multilevel Solution of the Elastohydrodynamic Contact for the Water Lubricated Silicon Carbide 3D Line Contact,"Tribol. Trans., 45, pp. 110-116.
31. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge, UK.
32. Liu, S., Wang, Q., and Liu, G., 2000, "A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses,"Wear, 243, pp. 101-110.
33. Liu, S., Hua, D., Chen, W. W., and Wang, Q., 2007, "Tribological Modeling: Application of Fast Fourier Transform,"Tribol. Int., 40, pp. 1284-1293.
34. Chen, W. W., Liu, S., and Wang, Q., 2008, "Fast Fourier Transform Based Numerical Methods for Elastoplastic Contacts of Nominally Flat Surfaces,"ASME J. Appl. Mech., 75, p. 011022.
35. Greenwood, J. A., and Williamson, J. B. P., 1966, "Contact of Nominally Flat Surface,"Proc. R. Soc. London, Ser. A, 295, pp. 300-319.
36. Liu, S., and Wang, Q., 2002, "Studying Contact Stress Fields Caused by Surface Tractions With a Discrete Convolution and Fast Fourier Transform Algorithm,"ASME J. Tribol., 124, pp. 36-45.
37. Brandt, A., and Lubrecht, A. A., 1990, "Multilevel Matrix Multiplication and Fast Solution of Integral Equations,"J. Comput. Phys., 90, pp. 348-370.
38. Liu, S., and Wang, Q., 2005, "Elastic Fields Due to Eigenstrains in a Half-Space,"ASME J. Appl. Mech., 72, pp. 871-878.
39. Polonsky, I. A., and Keer, L. M., 1999, "A New Numerical Method for Solving Rough Contact Problems Based on the Multi-Level Multi-Summation and Conjugate Gradient Techniques,"Wear, 231, pp. 206-219.
40. Smith, J. O., and Liu, C. K., 1953, "Stresses Due to Tangential and Normal Loads on an Elastic Solid With Application to Some Contact Stress Problems,"ASME J. Appl. Mech., 75, pp. 157-166.