The optimization of machining parameters using the taguchi method for surface roughness of an AISI 8660 hardened alloy steel

Strojniski Vestnik/Journal of Mechanical Engineering

Volumn 56, Issue 6, 2010, Pages

  Motorcu, Ali Riza ^a  

^a Çanakkale Vocational College   (Turkey)

Author keywords

Ceramic cutting tools; Hardened alloy steel; Surface roughness model; Taguchi method

Indexed keywords

CUTTING PARAMETERS; CUTTING SPEED; DEPTH OF CUT; DOMINANT FACTOR; FEED-RATES; HARDENED ALLOY; HARDENED ALLOY STEEL; MACHINING PARAMETERS; MACHINING TEST; NOSE RADIUS; OPTIMAL TESTING; ORTHOGONAL DESIGN; SECOND-ORDER REGRESSION MODEL; STATISTICAL APPROACH; SURFACE FINISHES; SURFACE HARDENING; SURFACE ROUGHNESS MODEL;

ALLOYS; CERAMIC MATERIALS; CERAMIC TOOLS; CERIUM ALLOYS; CUTTING TOOLS; HARDENING; MACHINE TOOLS; MACHINING; METAL ANALYSIS; METAL WORKING TOOLS; OPTIMIZATION; REGRESSION ANALYSIS; SIGNAL TO NOISE RATIO; STEEL METALLURGY; SURFACE PROPERTIES; SURFACE ROUGHNESS; SURFACE TESTING; TAGUCHI METHODS;

CERAMIC CUTTING TOOLS;

EID: 77954885294     PISSN: 00392480     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (34)

1. Grzesik, W., Wanat, T., (2006) Surface Finish Generated in Hard Turning of Quenched Alloy Steel Parts Using Conventional and Wiper Ceramic Inserts, International Journal of Machine Tools and Manufacture, 46, p. 1988-1995.
2. Siler, H. R., Vila, C., Rodríguez, C. A., Abellán, J. V., (2009) Study of Face Milling of Hardened AISI D3 Steel with A Special Design of Carbide Tools, Int J. Adv. Manuf. Technol., 40, p. 12-25.
3. Koelsch, J., (1992) Beyond TiN New Tool Coatings Pick up Where TiN Left Off, Manufacturing Engineering, p. 27-32.
4. Sahin, Y., Motorcu, A. R., (2004) Surface Roughness Prediction Model in Machining of Carbon Steel by CVD Coated Cutting Tools, American Journal of Applied Science, 1(1), p. 12-17.
5. 3/TiC Mixed Ceramic Tool Based on The Response Surface Methodology, Journal of Materials Processing Technology, 208, p. 532-541.
6. Sahin, Y., Motorcu, A. R. (2005) Surface Roughness Model in Machining of Mild Steel by Coated Cutting Tools, Materials and Design, 26, p. 321-326.
7. Alauddin, M., Baradie, M. A. El., (1997) Tool Life Model for End Milling Steel, Mater. Process. Technol., 68, p. 50-59.
8. Choudhury, I. A., El-Baradie, M. A. (1997) Surface Roughness Prediction in Turning of High-Strength Steel by Factorial Design of Experiments, Mater. Process. Technol., 67, p. 55-61.
9. Sundaram, R. M., Lambert, B. K. (1981) Mathematical Models to Predict Surface Finish in Fine Turning of Steel, Part II, Int. J. Product. Res., 19, p. 557-564.
10. Mital, A., Mehta, M. (1998) Surface Finish Prediction Models for Fine Turning, Int. J. Product. Res., 26(12), p. 1861-1876.
11. Escalona, P. M., Cassier, Z. (1998) Influence of the Critical Cutting Speed on the Surface Finish on Turned Steel, Wear, 218, p. 103-109.
12. Fnides, B., Aouici, H., Yallese, M. A., (2008) Cutting Forces and Surface Roughness in Hard Turning of Hot Work Steel X38CrMoV5-1 Using Mixed Ceramic, Mechanika, 70(2), p. 73-78.
13. Lalwani, D. I., Mehta, N. K., Jain, P. K., (2008) Experimental Investigations of Cutting Parameters Influence on Cutting Forces and Surface Roughness in Finish Hard Turning of MDN250 Steel, Journal of Materials Processing Technology 206, p. 167-179.
14. Baradie, M. A. El., (1997) Surface Roughness Prediction in The Turning of High Strength Steel by Factorial Design of Experiments, Mater. Process. Technol., 67, p. 55-61.
15. Arbizu, I. P., Perez, C. J. L., (2003) Surface Roughness Prediction by Factorial Design of Experiments in Turning Processes, Mater. Process. Technol., 143-144, p. 390-396.
16. Abouelatta, O. B., Mádl, J., (2001) Surface Roughness Prediction Based on Cutting Parameters and Vibrations in Turning Operations, Mater. Process. Technol., 118, p. 269-277.
17. Roy, R. K., (1990) A Primer on the Taguchi Method, Competitive Manufacturing Series, New York, USA.
18. Yang, W. H, Tarng, Y. S., (1998) Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method, Mater. Process. Technol., 84, p. 122-129.
19. Nian, C. Y., Yang, W. H., Tarng, Y. S., (1999) Optimization of Turning Operations with Multiple Performances Characteristic, Mater. Process. Technol., 95, p. 90-96.
20. Kopac, J., Bahor, M., Sokovic, M., (2002) Optimal Machining Parameters for Achieving the Desired Surface Roughness in Fine Turning Cold Pre-Formed Steel Work Processing, International Machine Tools and Manufacture, 42, p. 707-716.
21. Davim, J. P., (2001) A Note on The Determination of Optimal Cutting Conditions for Surface Finish Obtained in Turning Using Design of Experiments, Mater. Process. Technol., 116, p. 305-308.
22. Kumar, A. S., Durai, A. R., Sornakumar, T., (2003) Machinability of Hardened Steel Using Alumina Based Ceramic Cutting Tools, Int. J. Refractory Metals and Hard Material, 21, p. 109-117.
23. Manna, A., Salodkar, S., (2008) Optimization of Machining Conditions for Effective Turning of E0300 Alloy Steel, Journal of Materials Processing Technology, 203, p. 147-153.
24. Zhang, J. Z., Chenb, J. C., Kirby, E. D., (2007) Surface Roughness Optimization in an End-Milling Operation Using the Taguchi Design Method, Journal of Materials Processing Technology, 184, p. 233-239.
25. 3 + TiCN Mixed Ceramic Tool, Materials and Design, 28, p. 1618-1622.
26. Nalbant, M., Gökkaya, H., Sur, G., (2007) Application of Taguchi Method in The Optimization of Cutting Parameters for Surface Roughness in Turning, Materials and Design, 28, p. 1379-1385.
27. Kennametal Hertel, (2001) Lathe Tools-Master Catalogue, Kennametal Hertel AG, Fürth, p. 28-49.
28. Şahin, Y., (2001), The Machinability of Hardened AISI 8660 Alloy Steel with Modern Coated Cutting Tools, Gazi University Journal of Science, 14(4), p. 52-61.
29. Singh, D., Rao, P. V., (2007) A Surface Roughness Prediction Model for Hard Turning Process, Int. J. Adv. Manuf. Technol., 32, p. 1115-1124.
30. Motorcu, A. R., Şahin, Y., Kiliçli, V., Erdoǧan, M., (2005), Modeling the Surface Roughness in Machining of AISI 4140 steel, International Scientific and Technical Conference, Modern Problems of Mechanical Engineering and Instrument Making, Baku, Azerbaijan, p. 238-244.
31. Suresh, P. V. S., Venkateswara, R. P., Desmukh, S. G., (2002) A Genetic Algorithmic Approach for Optimization of the Surface Roughness Prediction Model, International Journal of Machine Tools and Manufacture, 42, p. 675-680.
32. Darwish, S. M., (2001) The Impact of the Tool Materials and The Cutting Parameters on Surface Roughness of Supermet 718 Nickel Alloy, Mater. Process. Technol., 97, p. 10-18.
33. Feng, C. X., (2001) An Experimental Study of The Impact of Turning Parameters on Surface Roughness, Proceedings of the 2001 Industrial Engineering Research Conference, Paper No. 2036.
34. Hasegawa, M., Seireg, A., Lindberg, R. A., (1976) Surface Roughness Model for Turning, Tribology International, p. 285-289.