Corrosion of steel bars in cracked concrete: Very beginning to the early age of exposure

American Concrete Institute, ACI Special Publication

Volumn SP-235, Issue , 2006, Pages 103-124

  Mohammed, Tarek Uddin ^a   Hamada, Hidenori ^b  

^a UNIVERSITY OF ASIA PACIFIC   (Bangladesh)

^b PORT AND AIRPORT RESEARCH INSTITUTE   (Japan)

Author keywords

Corrosion; Crack; Macro cell; Marine environment; Micro cell; Slag cement; Steel bar

Indexed keywords

BARS (METAL); CALCITE; CALCIUM CARBONATE; CHLORINE COMPOUNDS; DEPOSITS; MICROCELLULAR RADIO SYSTEMS; PITTING; SEAWATER CORROSION; SLAG CEMENT; SLAGS; STEEL CORROSION;

CHLORIDE CONTENTS; CONCRETE PRISMS; CORROSION OF STEEL BARS; CORROSION PITS; CRACKED CONCRETES; MACRO-CELL CORROSION; STRESS LEVELS; SURFACE CONDITIONS;

CONCRETES;

EID: 77954816242     PISSN: 01932527     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (16)

1. Mohammed, T.U., Otsuki, N., Hisada, M., Tsunenori, S., “Effect of Crack Width and Bar Types on Corrosion of Steel in Concrete”, ASCE Materials Journal, Vol. 13, No. 3, pp. 194-201, May-June 2001.
2. Schiessl, P., and Raupach, M., “Laboratory Studies and Calculations on the Influence of Crack Width on Chloride-Induced Corrosion of Steel in Concrete”, ACI Materials Journal, V. 94, N0. 1, pp. 56-62, 1997.
3. Arya, C., Ofori-Darko, F.K., “Influence of Crack Frequency on Reinforcement Corrosion in Concrete, Cement and Concrete Research”, Vol. 26, No. 3, pp. 345-353, 1996.
4. Chun Qing Li, “Initiation of Chloride-Induced Reinforcement Corrosion in Concrete Structural Members - Prediction”, ACI Structural Journal, Vol. 99, No. 2, March - April 2002, pp. 133-141.
5. Mohammed, T.U., and Hamada, H., A Discussion of the Paper “Initiation of Chloride-Induced Reinforcement Corrosion in Concrete Structural Members - Prediction”, by Chun Qing Li, ACI Structural Journal, Vol. 99, No. 2, March-April 2002, pp. 133-141, ACI Structural Journal, Vol. 100, No. 1, January - February 2003, pp. 126-127.
6. Mohammed, T.U., Yamaji, T., Toshiyuki, A., and Hamada, H., “Corrosion of Steel Bars in Cracked Concrete Made with Ordinary Portland, Slag and Fly Ash Cements”, ACI SP 199-40, Volume 2, American Concrete Institute, Farmington Hills, Mich., pp. 699-718, 2001.
7. Mohammed, T.U., Yamaji, T., Toshiyuki, A., and Hamada, H., “Corrosion of Steel Bars in Cracked Concrete Made with Ordinary Portland, Slag and Fly Ash Cements”, ACI SP 199-40, Volume 2, American Concrete Institute, Farmington Hills, Mich., 2001, pp. 699-718.
8. Mohammed, T.U., Yamaji, T., and Hamada, H., “Microstructures and Interfaces in Concrete after 15 Years of Exposure in the Tidal Environment”, ACI Materials Journal, Vol. 99, No. 4, July - August 2002, pp. 352-360.
9. Mohammed, T.U., Yamaji, T., and Hamada, H., “Chloride Diffusion, Microstructures and Mineralogy of Concrete after 15 Years of Exposure in the Tidal Environment”, ACI Materials Journal, Vol. 99, No. 3, May-June 2002, pp. 256 - 263.
10. Mohammed, T.U. and Hamada, H., “Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Tidal Environment”, ACI Materials Journal, Vol. 100, No. 3,May - June 2003, pp. 194-202.
11. Fontana, M. G., and Greene, N. D., “Corrosion Engineering”, Second Edition, McGraw-Hill, 1983.
12. Brown, R.D., “Mechanism of Corrosion of Steel in Concrete in Relation to Design, Inspection and Repair of Offshore and Coastal Structures”, ACI SP 65, American Concrete Institute, Farmington Hills, Mich., 1980, pp. 169-204.
13. ASTM C876-91. 1991. “Standard Test Methods for Half-Cell Potential of Uncoated Reinforcing Steel in Concrete”.
14. Andrade, C., Alonso, C., “On-site Measurement of Corrosion Rate of Reinforcements, Fifth CANMET/ACI International Conference on Durability of Concrete”, Barcelona, Spain 2000, Proceedings of a Special Technical Session on “Near-Surface Testing for Strength and Durability of Concrete”, Ed. Basheer, P.A.M., 2000, pp.171-183.
15. Edvardsen, C., “Water Permeability and Autogenous Healing of Cracks in Concrete”, ACI Materials Journal, Vol. 96, No. 4, July-August 1999, pp. 448-454.
16. Mohammed, T.U., Hamada, H., and Yokota, H., “Autogenous Healing, Ingress of Chloride and Sulfate Through Cracks Under Marine Environment”, ACI SP 222-10, 2004, pp. 135-154.