Simulation of acoustic emission in planar carbon fiber reinforced plastic specimens

Journal of Nondestructive Evaluation

Volumn 29, Issue 2, 2010, Pages 123-142

  Sause, M G R ^a   Horn, S ^a  

^a UNIVERSITY OF AUGSBURG   (Germany)

Author keywords

Acoustic emission; Carbon fiber reinforced plastics; Finite element simulation; Pattern recognition

Indexed keywords

ACOUSTIC EMISSION SENSORS; ACOUSTIC EMISSION SIGNAL; APERTURE EFFECT; CRACK SURFACES; DISPLACEMENT DIRECTION; FAILURE MECHANISM; FAILURE PROCESS; FIBER BREAKAGES; FIBER-MATRIX INTERFACES; FINITE ELEMENT SIMULATION; FINITE ELEMENT SIMULATIONS; FOUR-POINT BENDING; IN-FIBER; MATRIX; MATRIX CRACKING; MECHANICAL LOADING; MICROMECHANICAL PROPERTY; PLATE WAVES; SIMULATED SIGNALS; SOURCE GEOMETRY; SOURCE MODELS; SPECIMEN BOUNDARY; THREE-DIMENSIONAL MODEL; WAVE FORMS;

ACOUSTIC EMISSIONS; CARBON FIBERS; CONCRETE BEAMS AND GIRDERS; CRACKS; ELASTOMERS; EXPERIMENTS; FIBER REINFORCED PLASTICS; FIBERS; FINITE ELEMENT METHOD; PATTERN RECOGNITION; PLASTICITY; PLATES (STRUCTURAL COMPONENTS); POLYESTERS; REINFORCED PLASTICS; RESINS; THREE DIMENSIONAL;

CARBON FIBER REINFORCED PLASTICS;

EID: 77954726229     PISSN: 01959298     EISSN: 15734862     Source Type: Journal    
DOI: 10.1007/s10921-010-0071-7     Document Type: Article

References (35)

1. Bohse, J., Chen, J.: Acoustic emission examination of mode I, mode II and mixed-mode I/II interlaminar fracture of unidirectional fiber-reinforced polymers. J. Acoust. Emiss. 19, 1-10 (2001).
2. Haselbach, W., Lauke, B.: Acoustic emission of debonding between fibre and matrix to evaluate local adhesion. Compos. Sci. Technol. 63, 2155-2162 (2003).
3. Ramirez-Jimenez, C.R., Papadakis, N., Reynolds, N., Gan, T.H., Purnell, P., Pharaoh, M.: Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event. Compos. Sci. Technol. 64, 1819-1827 (2004).
4. Marec, A., Thomas, J.-H., Guerjouma, R.: Damage characterization of polymer-based composite materials: multivariable analysis and wavelet transform for clustering acoustic emission data. Mech. Syst. Signal Process. 22, 1441-1464 (2008).
5. Li, X., Ramirez, C., Hines, E.L., Leeson, M.S., Purnell, P., Pharaoh, M.: Pattern recognition of fiber-reinforced plastic failure mechanism using computational intelligence techniques. In: Neural Networks, IEEE World Congress on Computational Intelligence, pp. 2340-2345 (2008).
6. Ohtsu, M., Ono, K.: A generalized theory of acoustic emission and Green's function in a half space. J. Acoust. Emiss. 3, 27-40 (1984).
7. Ohtsu, M., Ono, K.: The generalized theory and source representation of acoustic emission. J. Acoust. Emiss. 5, 124-133 (1986).
8. Green, E.R.: Acoustic emission in composite laminates. J. Nondestruct. Eval. 17(3), 117-127 (1998).
9. Giordano, M., Condelli, L., Nicolais, L.: Acoustic emission wave propagation in a viscoelastic plate. Compos. Sci. Technol. 59, 1735-1743 (1999).
10. Green, E.R.: Acoustic emission sources in a cross-ply laminated plate. Compos. Eng. 5, 1453-1469 (1995).
11. Prosser, W.H., Hamstad, M.A., Gary, J., Gallagher, A.O.: Finite element and plate theory modeling of acoustic emission waveforms. J. Nondestruct. Eval. 18(3), 83-90 (1999).
12. Wilcox, P.D., Lee, C.K., Scholey, J.J., Friswell, M.I., Wisnom, M.R., Drinkwater, B.W.: Progress towards a forward model of the complete acoustic emission process. Adv. Mater. Res. 13-14, 69-75 (2006).
13. Scholey, J.J., Wilcox, P.D., Lee, C.K., Friswell, M.I., Wisnom, M.R.: Acoustic emission in wide composite specimens. Adv. Mater. Res. 13-14, 325-332 (2006).
14. Castaings, M., Bacon, C., Hosten, B., Predoi, M.V.: Finite element predictions for the dynamic response of thermo-viscoelastic material structures. J. Acoust. Soc. Am. 115(3), 1125-1133 (2004).
15. Nieuwenhuis, J.H., Neumann, J., Greve, D.W., Oppenheim, I.J.: Generation and detection of guided waves using PZT wafer transducers. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 52, 2103-2111 (2005).
16. Greve, D.W., Neumann, J.J., Nieuwenhuis, J.H., Oppenheim, I.J., Tyson, N.L.: Use of Lamb waves to monitor plates: experiments and simulations. Proc. SPIE 5765, 281-292 (2005).
17. Hosten, B.: Heterogeneous structure of modes and Kramers-Kronig relationship in anisotropic viscoelastic materials. J. Acoust. Soc. Am. 104(3), 1382-1388 (1998).
18. Hamstad, M.A., Gallagher, A.O., Gary, J.: A wavelet transform applied to acoustic emission signals: part 1: source identification. J. Acoust. Emiss. 20, 39-61 (2002).
19. Prosser, W.H.: Advanced AE techniques in composite materials research. J. Acoust. Emiss. 14(3-4), 1-11 (1996).
20. Comsol, A.B.: COMSOL multiphysics-structural mechanics module. User's Guide (2008).
21. Hatano, H., Chaya, T., Watanabe, S., Jinbo, K.: Reciprocity calibration of impulse responses of acoustic emission transducers. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 45(5), 1221-1228 (1998).
22. Scruby, C.B., Buttle, D.J.: Quantitative fatigue crack measurement by acoustic emission. In:Marsh, K.J., Smith, R. (eds.) Crack measurement: techniques and applications, p. 207. EMAS, UK (1992).
23. Freund, L.B.: The initial wave front emitted by a suddenly extending crack in an elastic solid. J. Appl. Mech. 39, 601-602 (1972).
24. Prosser, W.H., Jackson, K.E., Kellas, S., Smith, B.T., McKeon, J., Friedman, A.: Advanced waveform-based acoustic emission detection of matrix cracking in composites. Mater. Eval. 53(9), 1052-1058 (1995).
25. Goujon, L., Baboux, J.C.: Behaviour of acoustic emission sensors using broadband calibration techniques. Measur. Sci. Technol. 14, 903-908 (2003).
26. Ono, K., Cho, H., Matsuo, T.: Transfer functions of acoustic emission sensors. J. Acoust. Emiss. 26, 72-90 (2008).
27. Scruby, C.B., Wadley, H.N.G.: A calibrated capacitance transducer for the detection of acoustic emission. J. Phys. D Appl. Phys. 11, 1487-1494 (1978).
28. Keprt, J., Benes, P.: The determination of uncertainty in the calibration of acoustic emission sensors. Int. J. Microstruct. Mater. Prop. 4(1), 85-103 (2009).
29. Sause, M.G.R., Schultheiß, D., Horn, S.: Acoustic emission investigation of coating fracture and delamination in hybrid carbon fiber reinforced plastic structures. J. Acoust. Emiss. 26, 1-13 (2008).
30. Sause, M.G.R., Haider, F., Horn, S.: Quantification of metallic coating failure on carbon fiber reinforced plastics using acoustic emission. Surf. Coat. Technol. 204(3), 300-308 (2009).
31. NOESIS Advanced Acoustic Emission Data Analysis and Pattern Recognition & Neural Networks Software for Acoustic Emission Applications, User's Manual, Enviroacoustics S.E. (2006).
32. Davies, D.L., Bouldin, D.W.: A cluster separation measure. IEEE Trans. Pattern Anal. 1, 224-227 (1979).
33. Tou, J.T.: DYNOC-A dynamic optimal cluster-seeking technique. Int. J. Comput. Inf. Sci. 8(6), 541-547 (1979).
34. Anastassopoulos, A.A., Philippidis, T.P.: Clustering methodology for the evaluation of acoustic emission from composites. J. Acoust. Emiss. 13, 11-21 (1995).
35. Sause, M.G.R.: AWARE++ Software manual Rev. 1.0. http://www.physik.uni- augsburg.de/exp2/downloads.de.html (2009).