Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactor

Bioresource Technology

Volumn 101, Issue 21, 2010, Pages 8389-8395

  Thangalazhy Gopakumar, Suchithra ^a   Adhikari, Sushil ^a   Ravindran, Harideepan ^a   Gupta, Ram B ^a   Fasina, Oladiran ^a   Tu, Maobing ^b   Fernando, Sandun D ^c  

^a AUBURN UNIVERSITY   (United States)

^b AUBURN UNIVERSITY   (United States)

^c Texas A and M University   (United States)

Author keywords

Bio oil; Fast pyrolysis; PH; Physical and chemical characterization; Pine wood

Indexed keywords

ASTM STANDARDS; BIO OIL; BIOMASS SOURCE; CHEMICAL CHARACTERIZATION; CONCENTRATION OF; EFFECT OF TEMPERATURE; FAST PYROLYSIS; HIGH YIELD; HIGHER HEATING VALUE; MOISTURE CONTENTS; PH VALUE; PHYSIO-CHEMICAL PROPERTIES; PINE WOODS; PROCESS PARAMETERS; PYROLYSIS TEMPERATURE; RESIDENCE TIME; SOLID CONTENTS;

AUGERS; CALORIFIC VALUE; CHEMICAL COMPOUNDS; PH; PHENOLS; WATER CONTENT; WOOD;

CRACKING (CHEMICAL);

1,2 CYCLOPENTANEDIONE, 3 METHYL; 2 CYCLOPENTEN 1 ONE, 3 METHYL; 2 FURANCARBOXALDEHYDE, 5 HYDROXYMETHYL; 2 FURANCARBOXALDEHYDE, 5 METHYL; 5 METHYLSALICYLALDEHYDE; ACETIC ACID; CARBOHYDRATE; CATECHOL; CROTONIC ACID DERIVATIVE; FURAN DERIVATIVE; FURANONE DERIVATIVE; FURFURAL; GUAIACOL; HOMOCATECHOL; ISOEUGENOL; LEVOGLUCOSAN; OIL; ORTHO CRESOL; PARA TOLUHYDROQUINONE; PHENOL; PHENOL DERIVATIVE; PROPIONIC ACID; TOLUENE; UNCLASSIFIED DRUG; VANILLIN; BIOFUEL;

BIOFUEL; BIOREACTOR; CONCENTRATION (COMPOSITION); CONIFEROUS TREE; MOISTURE CONTENT; PHENOL; PHYSICOCHEMICAL PROPERTY; PYROLYSIS; RESIDENCE TIME; TEMPERATURE EFFECT; VEGETABLE OIL; YIELD;

ARTICLE; ASH; AUGER REACTOR; BIOMASS; BIOMASS PRODUCTION; CHEMICAL ANALYSIS; CHEMICAL COMPOSITION; CHEMICAL REACTION; CONCENTRATION PROCESS; DENSITY; HEATING; MEAN RESIDENCE TIME; MOISTURE; PH; PHYSICAL CHEMISTRY; PHYSICAL PARAMETERS; PINE; PRIORITY JOURNAL; PYROLYSIS; QUALITY CONTROL; REACTOR MONITORING; SHEAR RATE; SOLID; TEMPERATURE; TEMPERATURE SENSITIVITY; UNITED STATES; VISCOSITY; WATER CONTENT; BIOREACTOR; CHEMISTRY; WOOD;

BIOFUELS; BIOMASS; BIOREACTORS; PINUS; TEMPERATURE; VISCOSITY; WOOD;

CHEMICAL COMPOUNDS; MOISTURE CONTENT; PH; PHENOLS; PINUS; PYROLYSIS; WOOD;

UNITED STATES;

EID: 77954541892     PISSN: 09608524     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biortech.2010.05.040     Document Type: Article

References (35)

1. Adjaye J.D., Bakhshi N.N. Production of hydrocarbons by catalytic upgrading of a fast pyrolysis bio-oil. Part I: conversion over various catalysts. Fuel Processing Technology 1995, 45:161-183.
2. Asadullah M., Rahman M.A., Ali M.M., Rahman M.S., Motin M.A., Sultan M.B., Alam M.R. Production of bio-oil from fixed bed pyrolysis of bagasse. Fuel 2007, 86:2514-2520.
3. ASTM, 2009. Standard Specification for Pyrolysis Liquid Biofuel. American Society for Testing and Materials (ASTM) Standard D-7544-09.
4. ASTM, 2006. Standard Test Method for Moisture Analysis of Particulate Wood Fuels. American Society for Testing and Materials (ASTM) Standard E 871-82.
5. ASTM, 2007. Standard Test Method for Ash in Biomass. American Society for Testing and Materials (ASTM) Standard E 1755-01.
6. Bhattacharya P., Steele P.H., Hassan E.B.M., Mitchell B., Ingram L., Pittman C.U. Wood/plastic copyrolysis in an auger reactor: chemical and physical analysis of the products. Fuel 2009, 88:1251-1260.
7. Branca C., Giudicianni P., Blasi C.D. GC/MS characterization of liquids generated from low-temperature pyrolysis of wood. Industrial and Engineering Chemistry Research 2003, 42:3190-3202.
8. Bridgwater A.V. Principles and practice of biomass fast pyrolysis processes for liquids. Journal of Analytical and Applied Pyrolysis 1999, 51:3-22.
9. Bridgwater A.V., Peacocke G.V.C. Fast pyrolysis processes for biomass. Renewable and Sustainable Energy Reviews 2000, 4:1-73.
10. Chiaramonti D., Bonini M., Fratini E., Tondi G., Gartner K., Bridgwater A., Grimm H.P., Soldaini I., Webster A., Baglioni P. Development of emulsions from biomass pyrolysis liquid and diesel and their use in engines-Part 1: emulsion production. Biomass and Bioenergy 2003, 25:85-99.
11. Czernik S., Bridgwater A.V. Overview of applications of biomass fast pyrolysis oil. Energy Fuels 2004, 18:590-598.
12. Demirbas A. Kinetics for non-isothermal flash pyrolysis of hazelnut shell. Bioresource Technology 1998, 66:247-252.
13. Demirbas A. The Influence of temperature on the yields of compounds existing in bio-oils obtained from biomass samples via pyrolysis. Fuel Processing Technology 2007, 88:591-597.
14. Diebold, J.P., 2000. A Review of the Chemical and Physical Mechanisms of the Storage Stability of Fast Pyrolysis Bio-oils. National Renewable Energy Laboratory.
15. Diebold J.P., Czernik S. Additives to lower and stabilize the viscosity of pyrolysis oils during storage. Energy Fuels 1997, 11:1081-1091.
16. Elliott D.C. Historical developments in hydroprocessing bio-oils. Energy Fuels 2007, 21:1792-1815.
17. Furimsky E. Catalytic hydrodeoxygenation. Applied Catalysis A: General 2000, 199:147-190.
18. Garcia-Perez M., Adams T.T., Goodrum J.W., Geller D.P., Das K.C. Production and fuel properties of pine chip bio-oil/biodiesel blends. Energy Fuels 2007, 21:2363-2372.
19. Gupta R.B., Demirbas A. Gasoline, Diesel and Ethanol Biofuels from Grasses and Plants 2010, Cambridge University Press, Cambridge.
20. He R., Ye X.P., English B.C., Satrio J.A. Influence of pyrolysis condition on switchgrass bio-oil yield and physicochemical properties. Bioresource Technology 2009, 100:5305-5311.
21. Horne P.A., Williams P.T. Influence of temperature on the products from the flash pyrolysis of biomass. Fuel 1996, 75:1051-1059.
22. Ingram L., Mohan D., Bricka M., Steele P., Strobel D., Crocker D., Mitchell B., Mohammad J., Cantrell K., Pittman C.U. Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils. Energy Fuels 2008, 22:614-625.
23. Ji-lu Z. Bio-oil from fast pyrolysis of rice husk: yields and related properties and improvement of the pyrolysis system. Journal of Analytical and Applied Pyrolysis 2007, 80:30-35.
24. Lee S.-H., Eom M.-S., Yoo K.-S., Kim N.-C., Jeon J.-K., Park Y.-K., Song B.-H., Lee S.-H. The yields and composition of bio-oil produced from Quercus Acutissima in a bubbling fluidized bed pyrolyzer. Journal of Analytical and Applied Pyrolysis 2008, 83:110-114.
25. Leroy J., Choplin L., Kaliaguine S. Rheological characterization of pyrolytic wood derived oils: existence of a compensation effect. Chemical Engineering Communications 1988, 71:157-176.
26. McHenry M.P. Agricultural bio-char production, renewable energy generation and farm carbon sequestration in Western Australia: certainty, uncertainty and risk. Agriculture, Ecosystems and Environment 2009, 129:1-7.
27. Milbrandt, A., 2005. A Geographic Perspective on the Current Biomass Resource Availability in the United States. NREL, NREL/TP-560-39181.
28. Milne T.A., Agblevor F., Davis M., Deutch S., Johnson D. A review of the chemical composition of fast pyrolysis oils. Developments in Thermochemical Biomass Conversion 1997, 409-424. Blackie Academic Professional, London. A.V. Bridgewater, D.G.B. Boocock (Eds.).
29. Mohan D., Pittman C.U., Steele P.H. Pyrolysis of wood/biomass for bio-oil: a critical review. Energy Fuels 2006, 20:848-889.
30. Park H.J., Park Y.-K., Kim J.S. Influence of reaction conditions and the char separation system on the production of bio-oil from radiata pine sawdust by fast pyrolysis. Fuel Processing Technology 2008, 89:797-802.
31. Perlack, R.D., Wright, L.L., Turhollow, A.F., Graham, R.L., Stokes, B.J., Erbach, D.C., 2005. Biomass as a Feedstock for a Bioenergy and Bioproducts Industry: The Technical Feasibility of a Billion-ton Annual Supply. USDA/DOE, DOE/GO-102005-2135, ORNL/TM-2005/66.
32. Qi Z., Jie C., Tiejun W., Ying X. Review of biomass pyrolysis oil properties and upgrading research. Energy Conversion and Management 2007, 48:87-92.
33. 3 catalysts. Catalysis Today 2005, 100:331-335.
34. Sensoz S., Demiral I., Gercel H.F. Olive bagasse (Olea europea L.) pyrolysis. Bioresource Technology 2006, 97:429-436.
35. Zhang Q., Chang J., Wang T., Xu Y. Upgrading bio-oil over different solid catalysts. Energy Fuels 2006, 20:2717-2720.