A comparative study between gamma and UV radiation of jute fabrics/polypropylene composites: Effect of starch

Journal of Reinforced Plastics and Composites

Volumn 29, Issue 13, 2010, Pages 1930-1939

  Zaman, Haydar U ^a   Khan, Mubarak A ^a   Khan, Ruhul A ^a   Mollah, M Z I ^a   Pervin, Shamim ^a   Al Mamun, Md ^a  

^a INSTITUTE OF NUCLEAR SCIENCE AND TECHNOLOGY   (Bangladesh)

Author keywords

composite; Jute fabrics; polypropylene; starch and mechanical properties.

Indexed keywords

COMPARATIVE STUDIES; COMPOSITE; HESSIAN CLOTH; JUTE FABRICS; MATRIX COMPOSITE; SCANNING ELECTRON MICROSCOPIC; SOAKING TIME; STARCH SOLUTIONS; UV RADIATION;

COMPRESSION MOLDING; MECHANICAL PROPERTIES; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; STARCH; THERMOPLASTICS; ULTRAVIOLET RADIATION;

FABRICS;

EID: 77954445496     PISSN: 07316844     EISSN: 15307964     Source Type: Journal    
DOI: 10.1177/0731684409343325     Document Type: Article

References (26)

1. Aziz, S.H. and Ansel, M.P. (2004). The Effect of Alkalization and Fiber Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fiber Composites: Part1-Polyester Resin Matrix, Compos. Sci. Technol., 64: 1219-1230.
2. Mannan, Kh. M. and Talukder, M.A.I. (1997). Characterization of Raw Delignified and Bleached Jute Fibers by Study of Absorption of Moisture and Some Mechanical Properties, Polymer, 38 (10). 2493-2500.
3. Bonfim, R.F.S. (1968). Fibras Sintéticas e o Futuro da Economia da Juta, 2 nd edn, Vol. 43, Sudam, Brasilia, Brazil.
4. Nassar, N.L. (1980). In: Capsularis, L. and C Olitorius, L. (eds), Bibliografia Data Jute Corchorus, Embrapa / DID, Brasilia, Brazil.
5. Homma, A.K.O. (1998). In: Agrícola (ed.), Amazönia Meio Ambientee Desenvolvimento, Embrapa / SPI, Brasilia, Brazil.
6. Mannan, Kh. M. and Robbany, Z. (1996). Rotation of a Natural Cellulosic Fiber about its Fibre Axis due to Absorption of Moisture, Polymer, 37 (20). 4639-4641.
7. Harikumar, K.R., Joseph, K. and Thomas, S. (1999). Jute Sack Cloth Reinforced Polypropylene Composites: Mechanical and Sorption Studies, J. Reinf. Plast. Compos., 18 (4). 346-372.
8. Khan, M.A., Koop, C. and Hinrichsen, G. (2001). Effect of Vinyl and Silicon Monomer on Mechanical and Biodegradable Properties of Biodegradable Jute-Biopol Composite, J. Reinf. Plast. Compos., 20: 1414-1429.
9. Mohanty, A.K. and Misra, M. (1995). Studies on Jute Composites a Literature Review, Polym. Plast. Technol. Eng., 34 ( 5 ).
10. Khan, M.A., Hassan, M.M. and Drzal, L.T. (2005). Effect of 2-Hydroxyethyl Methacrylate (HEMA) on the Mechanical and Thermal Properties of Jute/Polycarbonate Composites, Composites, Part A, 36: 71-81.
11. Mohanty, A.K., Khan, M.A. and Hinrichsen, G. (2000). Surface Modification of Jute and its Influence on Performance of Biodegradable Jute Fabrics/Biopol Composites, Compos. Sci. Technol., 60: 1115-1124.
12. Khan, M.A. and Hassan, M.M. (2006). Effect of 3 Amono-silane on the Performance of Jute-Polycarbonate Composite, J. Appl. Polym. Sci., 100 (6). 4142-4151.
13. Oldring, P. K. T. (ed.) (1991). Chemistry and Technology of UV and EB Formulation for Coatings, Inks and Paints, Vol. 1-5, SITA Technology, London.
14. Gassan, J. and Gutowski, V.S. (2000). Effect of Corona Discharge and UV Treatment on the Properties of Jute Fibre Epoxy Composites, J. Compos. Sci. Technol., 60: 2857-2863.
15. Khan, M.A., Haque, N., Kafi, A.A., Alam, M.N. and Abedin, M.Z. (2006). Jute Reinforced Polymer Composite by Gamma Radiation: Effect of Surface Treatment with UV Radiation, Polym. Plast. Technol. Eng., 45 (50). 607-613.
16. Ali, K.M.I., Khan, M.A. and Ali, M.A. (1997). Study of Jute Materials with Urethane Acrylate by UV Curing, Radiat. Phys. Chem., 49 (3). 383-388.
17. Ramaraj, B. (2007). Crosslinked Poly (Vinyl Alcohol) and Starch Composite Films: Study of their Physico-mechanical, Thermal, and Swelling Properties, J. Appl. Polym. Sci., 103: 1127-1132.
18. Ramaraj, B. (2007). Crosslinked Poly (vinyl alcohol) and Starch Composite Films II. Physico-mechanical, Thermal, and Swelling Properties, J. Appl. Polym. Sci., 103: 909-916.
19. Morsyleide, F., Rosa, B.-S., Chiou, S., Eliton, S. and Imam, H. (2009). Biodegradable Composites Based on Starch/EVOH/Glycerol Blends and Coconut Fibers, J. Appl. Polym. Sci., 111: 612-618.
20. Mathew, A.P., Thielemans, W. and Dufresne, A. (2008). Mechanical Properties of Nano Composites from Sorbital Plasticized Starch and Tunicin Whiskers, J. Appl. Polym. Sci., 109: 4065-4074.
21. Cao, X., Chen, Y., Chang, P.R., Stumborg, M. and Huneault, M.A. (2008). Green Composites Reinforced with Nano-crystals in Plasticized Starch, J.Appl. Poly. Sci., 109: 3804-3810.
22. Charlesby, A. (1958). Effects of Radiation on Materials, pp. 261-265, Reinhold Publishing Corp, New York.
23. Dole, M., Williams, T.F. and Arvia, A.J. (1959). Proceedings of the Second International Conference on the Peaceful Uses of Atomic Energy Geneva, United Nations, New York, Vol. 29, pp. 171-172.
24. Rowell, R.M., Hen, J.S. and Rowell, J.S. (2000). Characterization and Factors Effecting Fiber Properties, In: Frollini, E., Leao, A. L. L. and Mattoso, H. C. (eds), Natural Polymer and Agro Fiber Composites, pp. 115-124, Sao Carios, Brazil.
25. Marcovich, N.F., Ostrovsky, A.N., Aranguren, M.I. and Reboredo, M.M. (2000). Proceedings from the 3rd International Symposium on Natural Polymers and Composites-IS NaPOl Sao Pedro, SP, Brazil, pp. 14-17.
26. Wunderlich, B. (1990). Thermal Analysis, Academic Press, Boston.