Implementation and performance evaluation of a fast dynamic control scheme for capacitor-supported interline DVR

IEEE Transactions on Power Electronics

Volumn 25, Issue 8, 2010, Pages 1975-1988

  Ho, Carl Ngai Man ^a   Chung, Henry Shu Hung ^b  

^a ABB CORPORATE RESEARCH   (Switzerland)

^b CITY UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Boundary control; dynamic voltage restoration (DVR); inverters; power quality; voltage sag

Indexed keywords

BOUNDARY CONTROL; BOUNDARY CONTROLS; CAPACITOR BANK; CONTROL LOOP; DC LINK CAPACITOR; DC LINKS; DESIGN PROCEDURE; DYNAMIC BEHAVIORS; DYNAMIC VOLTAGE RESTORERS; FAST DYNAMICS; GATE SIGNALS; INDUCTIVE LOADS; INNER LOOPS; INTERLINE DVR; LOAD VOLTAGES; PERFORMANCE EVALUATION; PHASE VOLTAGE; POWER STAGE; SECOND-ORDER SWITCHING SURFACE; SMALL SIGNAL; STEADY STATE; SUPPLY VOLTAGES; SWITCHING ACTION; VOLTAGE PHASE; VOLTAGE SAGS;

CAPACITANCE; CAPACITORS; DC POWER TRANSMISSION; REMOTE CONTROL; RESTORATION; VOLTAGE STABILIZING CIRCUITS;

QUALITY CONTROL;

EID: 77954160961     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2010.2044587     Document Type: Conference Paper

References (35)

1. M. Bollen, Understanding Power Quality Problems, Voltage Sags and Interruptions. New York: IEEE Press, 2000.
2. M. Sullivan, T. Vardell, and M. Johnson, "Power interruption costs to industrial and commercial consumers of electricity," IEEE Trans. Ind. App., vol.33, no.6, pp. 1448-1458, Nov. 1997.
3. N. Woodley, L. Morgan, and A. Sundaram, "Experience with an inverterbased dynamic voltage restorer," IEEE Trans. Power Del., vol.14, no.3, pp. 1181-1186, Jul. 1999.
4. R. R. Errabelli, Y. Y. Kolhatkar, and S. P. Das, "Experimental investigation ofDVRwith slidingmode control," in Proc. IEEE Power India Conf., Apr. 2006, paper 117.
5. S. Lee, H. Kim, and S. K. Sul, "A novel control method for the compensation voltages in dynamic voltage restorers," in Proc. IEEE APEC 2004, vol.1, pp. 614-620.
6. G. Joos, S. Chen, and L. Lopes, "Closed-loop state variable control of dynamic voltage restorers with fast compensation characteristics," in Proc. IEEE IAS 2004, Oct., vol.4, pp. 2252-2258.
7. P.Ruilin and Z.Yuegen, "Sliding mode control strategy of dynamic voltage restorer," in Proc. ICIECA 2005, Nov./Dec., p. 3.
8. T. Jauch, A. Kara, M. Rahmani, and D. Westermann, "Power quality ensured by dynamic voltage correction," ABB Rev., vol.4, 1998, pp. 25-36.
9. C. S. Chang, S.W. Yang, and Y. S. Ho, "Simulation and analysis of series voltage restorer (SVR) for voltage sag relief," in Proc. IEEE PES Winter Meeting, Jan, 2000, vol.4, pp. 2476-2481.
10. C. Meyer, R. W. De Doncker, Y. W. Li, and F. Blaabjerg, "Optimized control strategy for a medium-voltage DVR-Theoretical investigations and experimental results," IEEE Trans. Power Electron., vol.23, no.6, pp. 2746-2754, Nov. 2008.
11. S. S. Choi, B. H. Li, and D. M. Vilathgamuwa, "Dynamic voltage regulation with minimum energy injection," IEEE Trans. Power Syst., vol.15, no.1, pp. 51-57, Feb. 2000.
12. D. M. Vilathgamuwa, A. A. D. R. Perera, and S. S. Choi, "Voltage sag compensation with energy optimized dynamic voltage restorer," IEEE Trans. Power Del., vol.18, no.3, pp. 928-936, Jul. 2003.
13. K. Piatek, "A new approach of DVR control with minimized energy injection," in Proc. PEMC2006, Aug., pp. 1490-1495.
14. D. M. Vilathgamuwa, H.M.Wijekoon, and S. S. Choi, "Interline dynamic voltage restorer: A novel and economical approach for multiline power quality compensation," IEEE Trans. Ind. Appl., vol.40, no.6, pp. 1678-1685, Nov./Dec. 2004.
15. D. Vilathgamuwa, H.M.Wijekoon, and S. S. Choi, "A novel technique to compensate voltage sags in multiline distribution system-The interline dynamic voltage restorer," IEEE Trans. Ind. Electron., vol.53, no.5, pp. 1603-1611, Oct. 2006.
16. R. J. Nelson and D. G. Ramey, "Dynamic power and voltage regulator for an ac transmission line," U.S. Patent 5 610 501, Mar. 1997.
17. A. van Zyl, R. Spee, A. Faveluke, and S. Bhowmik, "Voltage sag ridethrough for adjustable-speed drives with active rectifiers," IEEE Trans. Ind. Appl., vol.34, no.6, pp. 1270-1277, Nov./Dec. 1998.
18. A. Ghosh, A. K. Jindal, and A. Joshi, "Design of a capacitor-supported dynamic voltage restorer (DVR) for unbalanced and distorted loads," IEEE Trans. Power Del., vol.19, no.1, pp. 405-413, Jan. 2004.
19. C. Ho, H. Chung, and K. Au, "Design and implementation of a fast dynamic control scheme for capacitor-supported dynamic voltage restorers," IEEE Trans. Power Electron., vol.23, no.1, pp. 237-251, Jan. 2008.
20. K. Leung and H. Chung, "Derivation of a second-order switching surface in the boundary control of buck converters," IEEE Power Electron. Lett., vol.2, no.2, pp. 63-67, Jun. 2004.
21. K. Leung and H. Chung, "A comparative study of the boundary control of buck converters using first-and second-order switching surfaces," IEEE Trans. Power Electron., vol.22, no.4, pp. 1196-1209, Jul. 2007.
22. D. O. Koval and M. B. Hughes, "Canadian national power quality survey: Frequency of industrial and commercial voltage sags," IEEE Trans. Ind. Appl., vol.33, no.3, pp. 622-627, May/Jun. 1997.
23. A. El Mofty and K. Youssef, "Industrial power quality problems," in Proc. IEE Conf. Electr. Distrib., Part 1: Contrib., Jun. 2001, vol.2, pp. 139-139
24. E. W. Gunther and H. Mebta, "A survey of distribution system power quality-Preliminary results," IEEE Trans. Power Del., vol.10, no.1, pp. 322-329, Jan. 1995.
25. M. H. J. Bollen, "Voltage sags: Effects, mitigation and prediction," Power Eng. J., vol.10, no.3, pp. 129-135, Jun. 1996.
26. B. M. Weedy and B. J. Cory, Electric Power System, 4th ed. New York: Wiley, 1998.
27. H. M. Berlin, Design of Phase-Locked Loop Circuits with Experiments, 1st ed. Indianapolis, IN: Sams, 1985.
28. H. Kim and S. K. Sul, "Compensation voltage control in dynamic voltage restorers by use of feed forward and state feedback scheme," IEEE Trans. Power Electron., vol.20, no.5, pp. 1169-1176, Jan. 2005.
29. B.Wang, G.Venkataramanan, and M. Illindala, "Operation and control of a dynamic voltage restorer using transformer coupled H-bridge converters," IEEE Trans. Power Electron., vol.21, no.4, pp. 1053-1061, Jun. 2006.
30. H. Awad, J. Svensson, and M Bollen, "Mitigation of unbalanced voltage dips using static series compensator," IEEE Trans. Power Electron., vol.19, no.3, pp. 837-846, May 2004.
31. Y. Chiu,K. Leung, andH.Chung, "High-order switching surface in boundary control of inverters," IEEE Trans. Power Electron., vol.22, no.5, pp. 1753-1765, Sep. 2007.
32. M. Ordonez, J. E. Quaicoe, and M. T. Iqbal, "Advanced boundary control of inverters using the natural switching surface: Normalized geometrical derivation," IEEE Trans. Power Electron., vol.23, no.6, pp. 2915-2930, Nov. 2008.
33. S. Chen, Y. M. Lai, S. C. Tan, and C. K. Tse, "Boundary control with ripple-derived switching surface for DC-AC inverters," IEEE Trans. Power Electron., vol.24, no.12, pp. 2873-2885, Dec. 2009.
34. M. Rashid, Power Electronics, Circuits, Devices, and Applications, 3rd ed. Englewood Cliffs, NJ: Prentice-Hall, 2004.
35. C. Ho, K. Au, and H. Chung, "Digital implementation of boundary control with second-order switching surface," in Proc. IEEE PESC2007, Jun., pp. 1658-1664.