Surface roughness effects on flow boiling in microchannels

Proceedings of the ASME InterPack Conference 2009, IPACK2009

Volumn 2, Issue , 2010, Pages 409-418

  Jones, Benjamin J ^a   Garimella, Suresh V ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADVERSE EFFECT; BOILING HEAT-TRANSFER COEFFICIENTS; BOILING INCIPIENCE; ELECTRICAL DISCHARGE MACHINING; MICRO CHANNEL HEAT SINKS; ON FLOW; PRESSURE DROP MEASUREMENTS; SURFACE ROUGHNESS EFFECTS; TEST PIECES; TWO-PHASE PRESSURE DROPS; WALL HEAT FLUX; WORKING FLUID;

DEIONIZED WATER; ELECTRIC DISCHARGES; HEAT FLUX; HEAT SINKS; HEAT TRANSFER COEFFICIENTS; METAL ANALYSIS; PRESSURE DROP; PRESSURE EFFECTS; SAWING; SURFACE PROPERTIES; SURFACE ROUGHNESS;

MICROCHANNELS;

EID: 77953951435     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/InterPACK2009-89168     Document Type: Conference Paper

References (36)

1. Bertsch, S.S., Groll, E.A., and Garimella, S.V., 2008, "Refrigerant Flow Boiling Heat Transfer in Parallel Microchannels as a Function of Local Vapor Quality," International Journal of Heat and Mass Transfer, vol. 51, pp. 4775-4787.
2. Harirchian, T., and Garimella, S.V., 2008, "Microchannel Size Effects on Local Flow Boiling Heat Transfer to a Dielectric Fluid," International Journal of Heat and Mass Transfer, vol. 51, pp. 3724-3735.
3. Bertsch, S.S., Groll, E.A., Garimella, S.V., 2009, "Effects of Heat Flux, Mass Flux, Vapor Quality, and Saturation Temperature on Flow Boiling Heat Transfer in Microchannels," International Journal of Multiphase Flow, vol. 35, pp. 142-154.
4. Harirchian, T., and Garimella, S.V., 2009, "Effects of Channel Dimensions, Heat Flux, and Mass Flux on Flow Boiling Regimes in Microchannels," International Journal of Multiphase Flow, vol. 35, pp. 349-362.
5. Kandlikar, S.G., 1998, "Heat Transfer Characteristics in Partial Boiling, Fully Developed Boiling, and Significant Void Flow Regions of Subcooled Flow Boiling," Journal of Heat Transfer, vol. 120, pp. 395-401.
6. Bertsch, S.S., Groll, E.A., and Garimella, S.V., 2009, "A Composite Heat Transfer Correlation for Saturated Flow Boiling in Small Channels," International Journal of Heat and Mass Transfer, vol. 52, pp. 2110-2118.
7. Qu, W., and Mudawar, I., 2003, "Measurement and Prediction of Pressure Drop in Two-Phase Micro-Channel Heat Sinks," International Journal of Heat and Mass Transfer, vol. 46, pp. 2737-2753. (Pubitemid 36669406)
8. Lee, J., and Mudawar, I., 2005, "Two-Phase Flow in High-Heat-Flux Micro-Channel Heat Sink for Refrigeration Cooling Applications: Part I - Pressure Drop Characteristics," International Journal of Heat and Mass Transfer, vol. 48, pp. 928-940.
9. Lee, P.-S., and Garimella, S.V., 2008, "Saturated Flow Boiling Heat Transfer and Pressure Drop in Silicon Microchannel Arrays," International Journal of Heat and Mass Transfer, vol. 51, pp. 789-806.
10. Ammerman, C.N., and You, S.M., 1998, "Enhancing Small-Channel Convective Boiling Performance Using a Microporous Surface Coating," 1998 International Mechanical Engineering Congress and Exposition, Anaheim, CA, 3, pp. 467-476.
11. Ammerman, C.N., and You, S.M., 2001, "Enhancing Small-Channel Convective Boiling Performance Using a Microporous Surface Coating," Journal of Heat Transfer, vol. 123, pp. 976-983.
12. Kovalev, S.A., and Shklover, E.G., 1988, "Heat transfer in the boiling of water on a porous surface in an annular channel," High Temperature, vol. 26, pp. 712-717.
13. Savkin, N.N., Kuzma-Kichta, Yu.A., and Komendantov, A.S., 1988, "Investigating Enhancement of Heat Transfer With Water Boiling Under Conditions of Forced Flow in a Tube With a Porous Coating," Thermal Engineering, vol. 35, pp. 295-297.
14. Zhang, L., Wang, E.N., Goodson, K.E., and Kenny, T.W., 2005, "Phase Change Phenomena in Silicon Microchannels," International Journal of Heat and Mass Transfer, vol. 48, pp. 1572-1582.
15. Kandlikar, S.G., Kuan, W.K., Willistein, D.A., and Borrelli, J., 2006, "Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites," Journal of Heat Transfer, vol. 128, pp. 389-396.
16. Koşar, A., Kuo, C.-J., and Peles, Y., 2005, "Boiling Heat Transfer in Rectangular Microchannels With Reentrant Cavities," International Journal of Heat and Mass Transfer, vol. 48, pp. 4867-4886. (Pubitemid 41360539)
17. Koşar, A., Kuo, C.-J., Peles, Y., 2005, "Reduced Pressure Boiling Heat Transfer in Rectangular Microchannels With Interconnected Reentrant Cavities," Journal of Heat Transfer, vol. 127, pp. 1106-1114. (Pubitemid 43071368)
18. Kuo, C.-J., Koşar, A., Peles, Y., Virost, S., Mishra, C., and Jensen, M.K., 2006, "Bubble Dynamics During Boiling in Enhanced Surface Microchannels," Journal of Microelectromechanical Systems, vol. 15, pp. 1514-1527. (Pubitemid 44921770)
19. Kuo, C.-J., and Peles, Y., 2007, "Local Measurement of Flow Boiling in Structured Surface Microchannels," International Journal of Heat and Mass Transfer, vol. 50, pp. 4513-4526. (Pubitemid 47483760)
20. Kuo, C.-J., and Peles, Y., 2008, "Flow Boiling Instabilities in Microchannels and Means for Mitigation by Reentrant Cavities," Journal of Heat Transfer, vol. 130, 072402.
21. th International Heat Transfer Conference, Sydney, Australia.
22. Jones, R.J., Pate, D.T., and Bhavnani, S.H., 2007, "Control of Instabilities in Two-Phase MicroChannel Flow Using Artificial Nucleation Sites," Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Vancouver, Canada.
23. th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems, San Diego, CA, pp. 71-78.
24. Webb, R.L., 1981, "The Evolution of Enhanced Surface Geometries for Nucleate Boiling," Heat Transfer Engineering, vol. 2, pp. 46-69.
25. Steinke, M.E., and Kandlikar, S.G., 2004, "Control and Effect of Dissolved Air in Water During Flow Boiling in Microchannels," International Journal of Heat and Mass Transfer, vol. 47, pp. 1925-1935.
26. Chen, T., and Garimella, S.V., 2006, "Effects of Dissolved Air on Subcooled Flow Boiling of a Dielectric Coolant in a MicroChannel Heat Sink," Journal of Electronics Packaging, vol. 128, pp. 398-404.
27. Collier, J.G., 1981, Convective Boiling and Condensation, 2nd ed., McGraw-Hill, New York.
28. Blevins, R.D., 1992, Applied Fluid Dynamics Handbook, Krieger Publishing Co.
29. Chisholm, D., and Sutherland, L.A., 1969, "Predictions of Pressure Gradients in Pipeline Systems During Two-Phase Flow," Symposium on Fluid Mechanics and Measurements in Two-Phase Flow Systems, University of Leeds.
30. Mishima, K., and Hibiki, T., 1996, "Some Characteristics of Air-Water Two-Phase Flow in Small Diameter Vertical Tubes," International Journal of Multiphase Flow, vol. 22, pp. 703-712. (Pubitemid 126383873)
31. Lockhart, R.W., and Martinelli, R.C., 1949, "Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes," Chemical Engineering Progress, vol. 45, pp. 39-48.
32. Lee, J., and Mudawar, I., 2005, "Two-Phase Flow in High-Heat-Flux Micro-Channel Heat Sink for Refrigeration Cooling Applications: Part II - Heat Transfer Characteristics," International Journal of Heat and Mass Transfer, vol. 48, pp. 41-955.
33. Chen, T., and Garimella, S.V., 2006, "Measurements and High-Speed Visualizations of Flow Boiling of a Dielectric Fluid in a Silicon Microchannel Heat Sink," International Journal of Multiphase Flow, vol. 32, pp. 957-971.
34. Yan, Y.-Y., and Lin, T.-F., 1998, "Evaporation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Small Pipe," International Journal of Heat and Mass Transfer, vol. 41, pp. 4183-4194.
35. Lee, H.J., and Lee, S.Y., 2001, "Heat Transfer Correlation for Boiling Flows in Small Rectangular Horizontal Channels With Low Aspect Ratios," International Journal of Multiphase Flow, vol. 27, pp. 2043-2062.
36. Lee, H.J., and Lee, S.Y., 2001, "Pressure Drop Correlations for Two-Phase Flow Within Horizontal Rectangular Channels With Small Heights," International Journal of Multiphase Flow, vol. 27, pp. 783-796.