A green route for synthesis of different polyureas based on phenylurazole: Rapid solid-state, microwave-assisted technique

High Performance Polymers

Volumn 22, Issue 3, 2010, Pages 314-327

  Mallakpour, Shadpour ^a   Dinari, Mohammad ^a  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Green chemistry; Microwave heating; Phenylurazole; Polyureas; Solid state polymerization; Step growth polymerization; Thermogravimetric analysis

Indexed keywords

DIBUTYLTIN; DIISOCYANATES; ENVIRONMENTALLY-FRIENDLY; FTIR SPECTROSCOPY; GOOD YIELD; GREEN CHEMISTRY; HEXAMETHYLENE DIISOCYANATE; HIGH TEMPERATURE CONDITION; HIGHER YIELD; INHERENT VISCOSITY; ISOPHORONE DIISOCYANATE; MICROWAVE SYNTHESIS; MICROWAVE-ASSISTED; MICROWAVE-ASSISTED TECHNIQUE; N ,N-DIMETHYLACETAMIDE; N ,N-DIMETHYLFORMAMIDE; POLYMERIZATION REACTION; POLYUREAS; SOLID STATE POLYMERIZATION; SOLUTION POLYMERIZATION; STEP-GROWTH POLYMERIZATIONS; URAZOLE;

BIODEGRADABLE POLYMERS; DIMETHYLFORMAMIDE; HEATING; INFRARED SPECTROSCOPY; MICROWAVE HEATING; MICROWAVE IRRADIATION; POLYMERIZATION; POLYMERS; SYNTHESIS (CHEMICAL); VISCOSITY;

THERMOGRAVIMETRIC ANALYSIS;

EID: 77953760849     PISSN: 09540083     EISSN: 13616412     Source Type: Journal    
DOI: 10.1177/0954008308101788     Document Type: Article

References (36)

1. Gross, S.M., Roberts, G.W., Kiserow, D.J. and Desimone J.M. (2001). Synthesis of High Molecular Weight Polycarbonate by Solid-State Polymerization, Macromolecules, 34: 3916-3920.
2. Ma, Y., Agarwal, U.S., Sikkema, D.J. and Lemstra, P.J. (2003). Solid-State Polymerization of PET: Influence of Nitrogen Sweep and High Vacuum, Polymer, 44: 4085-4096.
3. Gross, S.M., Flowers, D., Roberts, G., Kiserow, D.J. and Desimone, J.M. (1999). Solid-State Polymerization of Polycarbonates Using Supercritical CO2, Macromolecules, 32: 3167-3169.
4. Iyer, V.S., Sehra, J.C. and Ravindranath, K. (1993). Solid-State Polymerization of Poly(ary1 carbonate): A Facile Route to High Molecular Weight Polycarbonates, Macromolecules, 26: 1186-1187.
5. Mersobian, R.B., Ander, P., Ballantine, D.S. and Dienes, G.J. (1954). Force Constants of Hydrides, J. Chem. Phys., 22: 565-570.
6. Mersobian, R.B., Ander, P., Ballantine, D.S. and Dienes, G.J. (1956). γ-Ray Initiated Polymerization of Crystalline Monomers, J. Am. Chem. Soc., 78: 2939-2943.
7. Vouyiouk, S.N., Karakatsani, E.K. and Papaspyrides, C.D. (2005). Solid State Polymerization, Prog. Polym. Sci., 30: 10-37.
8. Li, N., Lu, J., Xu, Q. and Xia, X. (2007). Synthesis of Optical-Active Azo-Containing Acrylates Using Atom Transfer Radical Polymerization Under Microwave Irradiation, Eur. Polym. J., 43: 4486-4492. (Pubitemid 47483690)
9. Bousquet-Berthelin, C., Chaumont, D. and Stuerga, D. (2008). Flash Microwave Synthesis of Trevorite Nanoparticles, J. Solid State Chem., 181: 616-622.
10. Zhao, Z., Li, Z., Xia, Q., Xi, H. and Lin, Y. (2008). Fast Synthesis of Temperature-Sensitive Pnipaam Hydrogels by Microwave Irradiation, Eur. Polym. J., 44: 1217-1224.
11. Liao, L., Zhang, C. and Gong, S. (2007). Rapid Synthesis of Poly(trimethylene carbonate) by Microwave-Assisted Ring-Opening Polymerization, Eur. Polym. J., 43: 4289-4296. (Pubitemid 47483706)
12. Caddic, S. (1995). Microwave assisted organic reactions, Tetrahedron, 51: 10403-10432.
13. Palchik, O., Kerner, R., Zhu, Z. and Gedanken1, A. (2000). Preparation of Cu22 x Te and Hg by Using Microwave Heating, J. Solid State Chem., 154: 530-534.
14. Das, P.B., Panneerselvam, M. and Rao, K.J. (2003). A Novel Microwave Route for the Preparation of Zrc-Sic Composites, J. Solid State Chem., 173: 196-202.
15. Robb, G.R., Harrison, A. and Whittaker, A.G. (2002). Temperature- Resolved, In-Situ Powder X-Ray Diffraction of Silver Iodide under Microwave Irradiation, Phys. Chem. Commun., 37: 135-137.
16. Jeselnik, M., Varma, R.S., Polanc, S. and Kocevar, M. (2002). Solid-State Synthesis of Heterocyclic Hydrazones Using Microwaves under Catalyst-Free Conditions, Green Chem., 4: 35-38.
17. Mallakpour, S. and Rafiee, Z. (2007). Microwave-Assisted Clean Synthesis of Aromatic Photoactive Polyamides Derived from 5-(3-Acetoxynaphthoylamino)- Isophthalic Acid and Aromatic Diamines in Ionic Liquid, Eur. Polym. J., 43: 5017-5025.
18. Bikiaris, D.N., Achilias, D.S., Giliopoulos, D.J. and Karayannidis, G.P. (2006). Effect of Activated Carbon Black Nanoparticles on Solid State Polymerization of Poly(ethylene terephthalate), Eur. Polym. J., 42: 3190-3201.
19. Achilias, D.S., Bikiaris, D.N., Karavelidis, V. and Karayannidis, G.P. (2008). Effect of Silica Nanoparticles on Solid State Polymerization of Poly(ethylene terephthalate), Eur. Polym. J., in press.
20. Park, K.H., and Cox, L.J. (2002). Solid-Phase Synthesis of 1,2,4-Triazolidine-3,5-Diones, Tetrahedron Lett., 43: 3899-3901.
21. Mallakpour, S.E., Butler, B.G., Aghabozorg, H. and Palenik, G.J. (1985). Ene Reaction of (S)-(-4αMethylbenzyl)-L,2,4-Triazoline-3,5-Diowniet Propylene. X-Ray Diffraction Analysis of a Single Crystal of the Brominates Adduct, Macromolecules, 18: 342-347.
22. Ohashi, S., Leong, K.W., Matyjaszewski, K. and Butler, G.B. (1980). Ene Reaction of Triazolinediones with Alkenes. Structure and Properties of Products, J. Org. Chem., 45: 3467-3471.
23. Jikihara, T., Matsuya, K., Ohta, H., Suzuki, S. and Wakabayashi. O. (1981). U.S. Patent, 4, 249, 934, Japan. Chemical Abstract (1981). 95 62219y.
24. Mallakpour, S. and Zandi, H. (2006). Step-Growth Polymerization of 4-(1-Naphthyl)-1,2,4-Triazolidine-3,5-Dione with Diisocyanates, Polym. Bull. 57: 611-621.
25. Simlot, R., Izydore, R.A., Wong, O.T. and Hall, A.H. (1994). Hypolipidemic Activity of 4-Substituted 1,2-Diacyl-1,2,4-Triazolidine-3,5-Diones in Rodents, J. Pharm. Sci., 83: 367-371.
26. Mallakpour, S.E., and Sheikholeslam, B. (1999). Synthesis of Aliphatic Polyamides Containing 4-Phenylurazole Linkages, Polym. Int. 48: 41-46.
27. Mallakpour, S. and Rafiee, Z. (2006). Synthesis of Photoactive Polyureas Derived from 4-(4-Dimethylaminophenyl) 1,2,4-Triazolidine-3,5-Dione and Diisocyanates, Polym. Bull., 56: 293-303.
28. Mallakpour, S. and Rezazadeh, S. (2004). Microwave-Induced and High Temperature Solution Polymerization of 4-(4'-T-Butylphenyl)-1,2,4-Triazolidine- 3,5-Dione with Diisocyanates, Iranian Polym. J., 13: 29-38.
29. Mallakpour, S. and Dinari, M. (2007). Molten Salt as a Green Reaction Medium: Synthesis of Polyureas Containing 4-Phenylurazole Moiety in the Main Chain in the Presence of Tetrabutylammonium Bromide as an Ionic Liquid, e-Polymer, 35: 1-8.
30. Mallakpour, S. and Rafiee, Z. (2007). Tetrabutylammonium Bromide: An Efficient, Green and Novel Media for Polycondensation of 4-(4- Dimethylaminophenyl)-1,2,4-Triazolidine-3,5-Dione with Diisocyanates, Eur. Polym. J., 43: 1510-1515.
31. Chantarasiri, N., Choprayoon, C., Thussanee, M.P. and Nongnuj, M.N. (2004). Thermally Stable Metal-Containing Polyureas from Hexadentate Schiff Base Metal Complexes and Diisocyanate, Polym. Degrad. Stab., 86: 505-513.
32. Steuben, K.C., Barnabeo, A.E., Millich, F. and Carraher, C.E. Interfacial Synthesis, Vol. 2, Dekker, New York 1977, Chap. 18.
33. Mallakpour, S.E. (1992). A New Method for the Oxidation of 4-Phenylurazole to 4-Phenyltriazolinedione, J. Chem. Ed., 69: 238-241.
34. Mallakpour, S.E., Hajipour, A.R. and Raheno, H. (2002). Synthesis and Characterization of New Polyureas Derived from 4-(4-Methoxyphenyl)Urazole, J. Appl. Polym. Sci., 85: 1141-1146.
35. Mallakpour, S. and Dinari, M. (2008). A Novel and Green Method for Polycondensation Reaction of 4-Substituted Phenylurazoles with Different Diisocyanates Under Solvent-Free Conditions, J. Appl. Polym. Sci., 108: 3462-3466.
36. Mallakpour, S.E. and Sheikholeslami, B. (1999). Synthesis and Characterization of Novel Polyureas with 4-Phenylurazole Moieties in the Chain, Iranian Polym. J, 8: 61-66.