Diesel spray visualization and shockwaves

Atomization and Sprays

Volumn 20, Issue 3, 2010, Pages 177-189

  Hillamo, Harri ^a   Sarjovaara, Teemu ^a   Kaario, Ossi ^a   Vuorinen, Ville ^a   Larmi, Martti ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Backlight imaging; Common rail; Diesel spray; Diesel spray velocity; Shadowg raphy; Shockwaves; Spray visualization

Indexed keywords

BOUNDARY LAYER FLOW; BOUNDARY LAYERS; DENSITY OF GASES; FUEL INJECTION; FUELS; NOZZLES; ORIFICES; SHOCK WAVES; VELOCITY; VELOCITY MEASUREMENT; VISUALIZATION;

BOUNDARY LAYER VELOCITY; COMMON RAIL; DIESEL SPRAY; DISCHARGE COEFFICIENTS; INJECTION MEASUREMENT; PLANAR ILLUMINATION; SHADOWG-RAPHY; VELOCITY DIFFERENCE;

SPRAY NOZZLES;

EID: 77953665087     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: 10.1615/AtomizSpr.v20.i3.10     Document Type: Article

References (32)

1. Araneo, L., Coghe, A., Brunello, G., and Cossali, G. E., Experimental investigation of gas density effects on diesel spray penetration and entrainment, SAE Technical Paper Series 1999-01-0525, p. 15, 1999.
2. Bae, C. and Kang, J., The structure of a break-up zone in the transient diesel spray of a valve-covered orifice nozzle, Int. J. Engine Res., vol.7, pp. 319-334, DOI: 10.1243/14680874JER04805, 2006.
3. El-Hannouny, E. M., Gupta, S., Powell, C. F., Cheong, S.-K., Liu, J.,Wang, J., and Sekar, R. R., Near-nozzle spray characteristics of heavy-duty diesel injectors, SAE Technical Paper Series 2003-2101-3150, 2003.
4. Faeth, G.M., Hsiang, L.-P., andWu, P.-K., Structures and breakup properties of sprays, Int. J. Multiphase Flow, vol.21, 0301-9322(95)00059-3, pp. 99-127, 1995.
5. Heywood, J. B., Internal Combustion Engine Fundamentals, Int. ed., Singapore: McGraw-Hill Series in Mechanical Engineering, p. 930, ISBN 0-07-100499-8, 1988.
6. Hillamo, H. J., Sarjovaara, T., Vuorinen, V., Larmi, M., Isaksson, S., and Wik, C., Diesel spray penetration and velocity measurements, SAE Technical Paper Series 2008-2101-2478m 2008.
7. Hiroyasu, H. and Arai, M., Structures of fuel sprays in diesel engines, SAE Technical Paper Series 900475, International Congress and Exposition, Detroit, MI, p. 11, ISSN 0148-7191, 1990.
8. Im, K.-S., Cheong, S.-K., Liu, X., Wang, J., Lai, M.-C., Tate, M. W., Ercan, A., Renzi, M. J., Schuette, D. R., and Gruner, S. M., Interaction between supersonic disintegrating liquid jets and their shockwaves, Phys. Rev. Lett., vol.102, 074501, p. 4, DOI: 10.1103/PhysRevLett.102.074501, 2009.
9. Kastengren, A. L., Powell, C. F., Cheong, S.-K., Wang, Y., Im, K.-S., Liu, X., and Wang, J., Determination of diesel spray axial velocity using x-ray radiography, SAE Technical Paper Series 2007-2101-0666, 2007.
10. Kook, S. and Pickett, L. M., Effect of ambient temperature and density on diesel-spray-generated shock waves, ILASS Americas, Annual Conf. on Liquid Atomization and Sprays, 2008.
11. LeFebvre, A. H., Atomization and Sprays, U.S.A.: Taylor & Francis, ISBN 0-89116-603-3, ISSN 1040-2756, 1989.
12. Liepmann, H. W., and Roshko, A., Elements of Gas Dynamics, 1957 Galcit Aeronautical Series, California Institute of Technology, New York: John Wiley and Sons, Inc., 3rd. ed, 1960.
13. Linne,M., Paciaroni,M., Hall, T., and Parker, T., Ballistic imaging of the near field in a diesel spray, Exp. Fluids, vol.40, pp. 836-846, DOI: 10.1007/s00348-006-0122-0, 2006.
14. MacPhee, A. G., Tate, M. W., Powell, C. F., Yue, Y., Renzi,M. J., Ercan, A., Narayanan, S., Fontes, E.,Walther, J., Schaller, J., Gruner, S. M., and Wang, J., X-ray imaging of shockwaves generated by high-pressure fuel sprays, Science, vol.295, p. 1261, DOI: 10.1126/science.1068149, 2002.
15. Martynov, S. B., Mason, D. J., and Heikal, M. R., Numerical simulation of cavitation flows based on their hydrodynamic similarity, Int. J. Engine Res., vol.7, pp. 283-296, DOI: 10.1243/14680874JER04105, 2006.
16. Meingast, U., Reichelt, L., Renz, U., andMüller, D., Nozzle exit velocity measurements at a multi-orifice cr-nozzle, ILASSEurope 2000, Darmstadt, 2000.
17. Naber, J. D. and Siebers, L. D., Effects of gas density and vaporization on penetration and dispersion of diesel fuel, SAE Technical Paper Series 960034, pp. 82-111, 1996.
18. Ning, W., Reitz, R. D., Diwakar, R., and Lippert, A. M., A numerical investigation of nozzle geometry and injection condition effects on diesel fuel injector flow physics, SAE Technical Paper Series 2008-01-0936, p. 25, 2008.
19. Pickett, L. M., Kook, S., and Williams, T., Visualization of diesel spray penetration, cool-flame, ignition, hightemperature combustion, and soot formation using highspeed imaging, SAE Technical Paper Series 2009-2101-0658, 2009.
20. Pilch, M. and Erdman, C. A., Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration -Induced breakup of a liquid drop, Int. J. Multiphase Flow, vol.13, no.6, pp. 741-757, 1987.
21. Roisman, I. V., Araneo, L., and Tropea, C., Effect of ambient pressure on penetration of a diesel spray, Int. J. Multiphase Flow, vol.33, pp. 904-920, DOI: 10.1016/j.ijmultiphaseflow.2007.01.004, 2007.
22. Ryu, J., Kim, H., and Lee, K., A study on the spray structure and evaporation characteristic of common-rail type high-pressure injectors in homogenous charge compression ignition engine, Fuel, vol.84, pp. 2341-2350, DOI: 10.1016/j.fuel.2005.03.032, 2005.
23. Settles, G. S., Schlieren and Shadowgraph Techniques -Visualizing Phenomena in Transparent Media, Berlin-Heidelberg: Springer-Verlag, Corrected 2nd ed. printed in Germany, 2006, ISBN 3-540-66155-7, 2001.
24. Shao, J., Yan, Y., Greeves, G., and Smith, S., Quantitative characterization of diesel sprays using digital imaging techniques, Meas. Sci. Technol., vol.14, pp. 1110-1116, 2003.
25. Smallwood, G. J. and Gülder, O. L., Views on the structure of transient diesel sprays, Atomization Sprays, vol.10, pp. 355-386, 2000.
26. Srinivasan, V., Salazar, A. J., and Saito, K., Numerical investigation on the disintegration of round turbulent jets using LOS/VOF technique, Atomization Sprays, vol.18, pp. 571-617, 2008.
27. Suh, H. K. and Lee, C. S., Effect of cavitation in nozzle orifices on the diesel fuel atomization characteristics, Int. J. Heat Fluid Flow, vol.29, pp. 1001-1009, DOI: 10.1016/j.ijheatfluidflow.2008.03.014, 2008a.
28. Suh, H. K. and Lee, C. S., Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common-rail system in a diesel engine, Fuel, vol.87, pp. 925-932, DOI:10.1016/j.fuel.2007. 05.051, 2008b.
29. Tonini, S., Gavaises, M., and Theodorakakos, A., Modelling of high-pressure dense diesel sprays with adaptive local grid refinement, Int. J. Heat Fluid Flow, vol.29, pp. 427-448, DOI: 10.1016/j.ijheatfluidflow.2007.11. 009, 2008.
30. Vuorinen, V., Larmi, M., Antila, E., Kaario, O., El-Hannoy, E., and Gupta, S., Near nozzle diesel spray modeling and x-ray measurements, SAE Technical Paper Series 2006-01-1390, p. 12, 2006.
31. White, F. M., Viscous Fluid Flow, Singapore: McGraw-Hill Companies, 3rd Int. ed., p. 629, ISBN 007-124493-X, 2006.
32. Wissel, S. and Grünefeld, G., Flow-field measurements of liquid and gaseous phases in the ultra-dense region of diesel sprays, Appl. Phys. B, vol.83, pp. 181-184, DOI: 10.1007/s00340-006-2185-2, 2006.