Unpowered antenna sensor for crack detection and measurement

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 7647, Issue , 2010, Pages

  Deshmukh, Srikar ^a   Mohammad, Irshad ^a   Xu, Xiang ^a   Huang, Haiying ^a  

^a The University of Texas at Arlington   (United States)

Author keywords

Antenna backscattering; Antenna sensor; Crack detection; Crack monitoring; Passive sensor; Wireless sensor

Indexed keywords

ANTENNA SENSORS; CRACK MONITORING; PASSIVE SENSOR; WIRELESS SENSOR;

ANTENNA GROUNDS; BACKSCATTERING; CONCRETE BRIDGES; CRACK DETECTION; ELECTRIC PROPERTIES; MICROSTRIP ANTENNAS; MONITORING; NATURAL FREQUENCIES; RADAR SYSTEMS;

MICROWAVE SENSORS;

EID: 77953528736     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.847573     Document Type: Conference Paper

References (31)

1. Kumar, A., Nayak, A., "Sensor system for crack initiation and crack growth monitoring in aero engine components", IEEE 0840-7789, 1452-1455 (2007).
2. Liu, Y., Lacher, A., Wang, G., Purekar, A. and Yu, M., "Wireless fiber optic sensor system for strain and pressure measurements on a rotor blade", Proc. of SPIE 6770, 67700Y 1-12 (2007).
3. Murphy, K. A. and Poland, S. H., "Optic strain and pressure sensors", Proc. of SPIE 3044, 352-358 (1997).
4. Shan, Q. and Dewhurst, R. J., "Surface-breaking fatigue crack detection using laser ultrasound", Applied Physics Letters 62, 2649-2651 (1993).
5. Giurgiutiu, V. and Bao, J., "Embedded-ultrasonics structural radar for in situ structural health monitoring of thin-wall structures", Struct. Health Monit. 3, 121-140 (2002).
6. Chang, F. K. Ihn, J. B., "Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics", Smart Mat. and Struct. 13, 609-620 (2004).
7. Shin, H. J. and Rose, J. L., "Guided wave tuning principles for defect detection in tubing", Journal of Nondestructive Evaluation 17, 27-36 (1998).
8. Yu, L. and Giurgiutiu, V., "Advanced signal processing for enhanced damage detection with piezoelectric wafer active sensors", Smart Struct. and Sys. 1, 185-215 (2005).
9. Chen, J., Shi, Y. and Shi, S., "Noise analysis of digital ultrasonic nondestructive evaluation system", International Journal of Pressure Vessels and Piping 76, 619-630 (1999).
10. Volkovas, V. and Dulevicius, J., "Acoustic Emission used for detection of crack generation in propellers of turbine-pump units", Russian Journal of Non-Destructive Testing 42, 248-254 (2006). (Pubitemid 44099838)
11. Shigeishi, M., Colombo, S., Broughton, K. J., Rutledge, H., Batchelor, A. J. and Forde, M. C., "Acoustic emission to assess and monitor the integrity of bridges", Construction and Building Materials 15, 35-49 (2001). (Pubitemid 32070999)
12. Rizzo, P., Cammarata, M., Dutta, D., Sohn, H. and Harries, K., "An unsupervised learning algorithm for fatigue crack detection in waveguides", Smart Materials and Structures 18, 11 (2009).
13. Doebling, "A Summary Review of Vibration-Based Damage Identification Methods", Shock and Vibration Digest 30, 91-105 (1998).
14. Spyrakos, C., Chen, H.L., Stephen, J. and Govidra. A., "Evaluating structural deterioration using dynamic response characteristic", Intelligent Structures, Elsevier Applier Sciencs, 137-154 (1990).
15. Sun, K., "Design and characterization of passive wireless strain sensor", Master Thesis, University of Puerto Rico
16. Liu, Y., Lacher, A., Wang, G., Purekar, A. and Yu, M., "Wireless fiber optic sensor system for strain and pressure measurements on a rotor blade", Proc. SPIE 6770, 6770Y (2007).
17. Murphy, K. A., Gunther, M. F., Claus, R. O., Tran, T. A. and Miller, M. S., "Optical fiber sensors for measurement of strain and acoustic waves", Proc. SPIE 1918, 110-20 (1993).
18. Wang, A., Miller, M. S., Plante, A. J., Gunther, M. F., Murphy, K. A. and Claus, R. O., "Split-spectrum intensitybased optical fiber sensors for measurement of micro-displacement, strain, and pressure", Appl. Opt. 35, 2595-01 (1996).
19. Roach, D., "Real time crack detection using mountable comparative vacuum monitoring sensors", Smart structures and systems 5, 317-328 (2009).
20. Wishaw, M. and Barton, D. P., "Comparative vacuum monitoring: a new method of in-situ real-time crack detection and monitoring", Structural Monitoring Systems Ltd., www.smsystems.com.au.
21. Morita, K., Kazuya, N., "Crack detection sensor using RFID-tag and electrically conductive paint", AIJ journal of technology and design 24, 73-76 (2006).
22. Grimberg, R., Udpa, L., Savin, A., Steigmann, R., Palihovici, V. and Udpa, S. S., "2D Eddy current sensor array", NDT&E International 39, 264-271 (2006).
23. Abraham, J.K. and Varadan, V., "Modelling of passive wireless sensors for RFID tag applications", Proc. SPIE 6172, 617204 (2006).
24. Perng, J. K., Hunt, W.D. and Edmonson, P. J., "Development of a shear horizontal SAW RFID biosensor", IEEE sensors Conf., 691-4 (2007).
25. Wen, W., Lee, K., Kim, T. and Yang, S., "Development of wireless MEMS sensor for RFID tag and temperature/pressure Monitoring", Proc. SPIE 6463, 64630Q (2007).
26. Morita, K., Kazuya, N., "Crack detection sensor using RFID-tag and electrically conductive paint", AIJ journal of technology and design 24, 73-76 (2006).
27. Tata, U., Deshmukh, S., Chiao, J. C., Carter, R. L., and Huang, H., "Bio-inspired sensor skins for structural health monitoring", Smart Materials and Structures 18, 8 (2009).
28. Dardari D and D'Errico, "Passive ultrawide bandwidth RFID", IEEE Globe Telecommunication Conference, 1-6 (2008).
29. Penttila, K., Keskilammi, M., Sydanheimo, L. and Kivikoski, M., "Radar cross-section analysis for passive RFID systems", IEEE Proceedings on Microwave Antennas Propagation 153, 103-109 (2006).
30. Knott, E., Shaeffer, J. and Tuley, M., [Radar Cross Section], Artech House, Boston, (1993).
31. Deshmukh, S. and Huang, H., "Wireless interrogation of passive antenna sensors", Meas. Sci. Technol. 21, 035201 (2010).