Analysis of evaporating mist flow for enhanced convective heat transfer

International Journal of Heat and Mass Transfer

Volumn 53, Issue 15-16, 2010, Pages 3346-3356

  Kumari, Niru ^a   Bahadur, Vaibhav ^a   Hodes, Marc ^b   Salamon, Todd ^c   Kolodner, Paul ^c   Lyons, Alan ^d   Garimella, Suresh V ^a  

^a PURDUE UNIVERSITY   (United States)

^b Tufts University   (United States)

^c LUCENT TECHNOLOGIES   (United States)

^d CITY UNIVERSITY OF NEW YORK   (United States)

Author keywords

Heat transfer enhancement; Mist flow; Thermal management; Two phase flow

Indexed keywords

AIR FLOW; CONVECTIVE HEAT; CONVECTIVE HEAT TRANSFER; DISSIPATION CAPACITY; DROPLET SIZES; ENERGY-TRANSPORT EQUATIONS; FLOW AND HEAT TRANSFER; HEAT TRANSFER ENHANCEMENT; INTERACTION TERM; MIST FLOWS; NUMERICAL SIMULATION; THERMAL MANAGEMENT; THERMAL MANAGEMENT APPLICATIONS; THERMAL PERFORMANCE; TRANSPORT EQUATION; TRANSPORT PROCESS; TWO PHASIS; WATER DROPLETS;

COMPUTER SIMULATION; HEAT SINKS; HEAT TRANSFER COEFFICIENTS; HEATING; NUMERICAL ANALYSIS; TEMPERATURE CONTROL; TWO PHASE FLOW;

DROP FORMATION;

EID: 77953475845     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2010.02.027     Document Type: Article

References (27)

1. Chu R.C., Simons R.E., Ellsworth M.J., Schmidt R.R., and Cozzolino V. Review of cooling technologies for computer products. IEEE Trans. Dev. Mater. Reliab. 4 4 (2004) 568-585
2. Shedd T.A., and Pautsch A.G. Spray impingement cooling with single and multiple nozzle arrays. Part 2: visualization and empirical models. Int. J. Heat Mass Transfer 48 (2005) 3176-3184
3. Lin L., and Ponnappan R. Heat transfer characteristics of spray cooling in a closed loop. Int. J. Heat Mass Transfer 46 (2003) 3737-3746
4. Freund S., Pautsch A.G., Shedd T.A., and Kabelac S. Local heat transfer coefficients in spray cooling systems measured with temperature oscillation IR thermography. Int. J. Heat Mass Transfer 50 (2007) 1953-1962
5. Pautsch A.G., and Shedd T.A. Adiabatic and diabatic measurements of the liquid film thickness during spray cooling with FC 72. Int. J. Heat Mass Transfer 49 (2006) 2610-2618
6. C.M. Kendall, J.P. Holman, Spray cooling heat transfer with subcooled trichlorotrifluoroethane (Freon-113) for vertical constant heat flux surfaces, in: Proceedings of IMECE, Atlanta, 1996.
7. D.E. Tilton, C.E. Tilton, M.R. Pais, M.J. Morgan, High-flux spray cooling in a simulated multichip module, in: ASME National Heat Transfer Conference, San Diego, CA, 1992.
8. Wang T., Gaddis J.L., and Li X. Mist/steam heat transfer of multiple rows of impinging jets. Int. J. Heat Mass Transfer 48 (2005) 5179-5191
9. Barrow H., and Pope C.W. Droplet evaporation with respect to the effectiveness of water-mist cooling. Appl. Energy 84 (2007) 404-412
10. Li X., Gaddis J.L., and Wang T. Mist/steam cooling by a row of impinging jets. Int. J. Heat Mass Transfer 46 (2003) 2279-2290
11. Lee S.L., Yang Z.H., and Hsyua Y. Cooling of a heated surface by mist flow. ASME J. Heat Transfer 116 (1994) 167-172
12. Graham K.M., and Ramadhyani S. Experimental and theoretical studies of mist jet impingement cooling. ASME J. Heat Transfer 118 (1996) 343-349
13. Yao S., and Rane A. Heat transfer of laminar mist flow in tubes. ASME J. Heat Transfer 102 (1980) 678-683
14. Trela M. An approximate calculation of heat transfer during flow of an air--water mist along a heated flat plate. Int. J. Heat Mass Transfer 24 (1981) 749-755
15. V. Bahadur, M. Hodes, A. Lyons, S. Krishnan, S.V. Garimella, Enhanced cooling in a sealed cabinet using an evaporating-condensing dielectric mist, in: Proceedings of ITHERM, Orlando, FL, 2008, pp. 1191--1198.
16. Terekhov V.I., and Pakhomov M.A. Numerical study of heat transfer in a laminar mist flow over an isothermal flat plate. Int. J. Heat Mass Transfer 45 (2002) 2077-2085
17. N. Kumari, V. Bahadur, M. Hodes, T. Salamon, A. Lyons, P. Kolodner, S.V. Garimella, Numerical analysis of mist-cooled high-performance components in cabinets, in: Proceedings of ASME 2009 InterPACK Conference, IPACK2009-89269, San Francisco, CA, 2009.
18. Li X., and Wang T. Two-phase flow simulation of mist film cooling on turbine blades with conjugate internal cooling. ASME J. Heat Transfer 130 (2008) 102901.1-102901.8
19. Adiga K.C., Hatcher R.F., Sheinson R.S., Williams F.W., and Ayers S. A computational and experimental study of ultra fine water mist as a total flooding agent. Fire Safety J. 42 (2007) 150-160
20. Groll R., Jakirlic S., and Tropea C. Comparative study of Euler/Euler and Euler/Lagrange approaches simulating evaporation in a turbulent gas-liquid flow. Int. J. Numer. Methods Fluids 59 (2009) 873-906
21. FLUENT 6 User's Guide, Lebanon, NH, Fluent Inc., 2000.
22. Ranz W.E., and Marshall W.R. Evaporation from drops, Part I and II. Chem. Eng. Progr. 48 (1952) 141-146 and 173-180
23. Strub M., Jabbour O., Strub F., and Bédécarrats J.P. Experimental study and modeling of the crystallization of a water droplet. Int. J. Refrig. 26 (2003) 59-68
24. Novak V., Sadowski D.L., Schoonover K.G., Shin S., Abdel-Khalik S.I., and Ghiaasian S.M. Heat transfer in two-component internal mist cooling Part II: mechanistic modeling. Nucl. Eng. Des. 238 (2008) 2351-2358
25. Kumari N., and Abraham J. Interaction of decelerating drops moving in tandem. Atom. Sprays 18 3 (2003) 191-241
26. Incropera F.P., and Dewitt D.P. Fundamentals of Heat and Mass Transfer. fifth ed. (2001), Wiley, New York
27. Hettiarachchi H.D.M., Colubvic M., Worek W.M., and Minkowycz W.J. Three-dimensional laminar slip-flow and heat transfer in a rectangular microchannel with constant wall temperature. Int. J. Heat Mass Transfer 51 (2008) 5088-5096