Effect of nanoclay on the mechanical and damping properties of aramid short fibre-filled styrene butadiene rubber composites

Polymer International

Volumn 59, Issue 2, 2010, Pages 187-197

  Praveen, Srinivasan ^a   Chattopadhyay, Pijush Kanti ^b   Jayendran, Soman ^a   Chakraborty, Bikash Chandra ^a   Chattopadhyay, Santanu ^b  

^a NAVAL MATERIALS RESEARCH LABORATORY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Composite; Hysteresis; Interface; Mechanical and dynamic mechanical properties; TEM

Indexed keywords

COMPOSITE SAMPLES; DAMPING PROPERTY; DYNAMIC MECHANICAL PROPERTY; DYNAMIC MECHANICAL THERMAL ANALYSIS; DYNAMIC STORAGE; DYNAMIC STRAIN; ELONGATION AT BREAK; FIBRE INTERACTIONS; FILLED COMPOSITES; FILLER DISTRIBUTION; FILLER INTERFACE; INTERFACE; LOW STRAINS; MATRIX; MORPHOLOGICAL ANALYSIS; NANO CLAYS; NANOCLAY LOADINGS; OPTIMUM PROPERTIES; SHORT FIBRE; STYRENE BUTADIENE RUBBER; TEM; VISCOELASTIC DAMPING;

BUTADIENE; DAMPING; DYNAMIC MECHANICAL ANALYSIS; DYNAMICS; ELECTRON ENERGY LOSS SPECTROSCOPY; ENERGY DISSIPATION; ENERGY DISSIPATORS; FIBERS; FILLERS; HYSTERESIS; NANOCOMPOSITES; NANOSTRUCTURED MATERIALS; RUBBER; STYRENE; TENSILE STRAIN; TENSILE STRENGTH; THERMOANALYSIS;

MECHANICAL PROPERTIES;

ARAMID FIBER; COMPRESSIVE PROPERTY; ELONGATION; FIBER REINFORCED COMPOSITE; MECHANICAL PROPERTY; MORPHOLOGY; RUBBER FIBER; STRAIN; TENSILE PROPERTY; VISCOELASTICITY;

EID: 77953354567     PISSN: 09598103     EISSN: 10970126     Source Type: Journal    
DOI: 10.1002/pi.2706     Document Type: Article

References (27)

1. Nielsen LE and Landel RF, Fiber filled composites and other composites, in Mechanical Properties of Polymers and Composites, 2nd edition. Marcel Dekker/CRC Press, New York, pp. 461-482 (1994).
2. Coran AY, Boustany K and Hamed P, Rubber Chem Technol 47:396-410 (1974)
3. Coran AY, Boustany K and Hamed P, J Appl Polym Sci 15:2471-2485 (1971)
4. Coran AY, Boustany K and Goettler LA, Rubber Chem Technol 49:1167-1181 (1976)
5. Moghe SR, Rubber Chem Technol 47:1074-1081 (1974).
6. Moghe SR, Rubber Chem Technol 49:1160-1166 (1976).
7. O'Connor JE, Rubber Chem Technol 50:945-958 (1977)
8. Foldi AP, Rubber Chem Technol 49:379-389 (1976)
9. Geethamma VG, Kalaprasad G, Groeninckx G and Thomas S, Composites A 36:1499-1506 (2005)
10. Pothan LA, Oommen Z and Thomas S, Compos Sci Technol 63:283-293 (2003)
11. Ashida M and Noguchi T, J Appl Polym Sci 30:1011-1021 (1985)
12. Praveen S, Chakraborty BC, Jayendran S, Raut RD and Chattopadhyay S, J Appl Polym Sci 111:264-272 (2009)
13. Mishra JK, Kim I and Chang SH, Macromol Rapid Commun 24:671-675 (2003)
14. Kojama M, Usuki A, Okada A and Kagimoto O, J Mater Res 8:1185-1189 (1993).
15. Chen G, Liu S, Chen S and Qi Z, Macromol Chem Phys 202:1189-1193 (2001)
16. Li X, Kang TK, Cho WJ, Lee JK and Ha CS, Macromol Rapid Commun 22:1306-1312 (2001)
17. Messermith PB and Giannelis EP, Chem Mater 6:1719-1725 (1994)
18. Timmerman JF, Hayes BS and Seferis JC, Compos Sci Technol 62:1249-1258 (2002)
19. Praveen S, Chattopadhyay PK, Albert P, Dalvi VG, Chakraborty BC and Chattopadhyay S, Composites A 40:309-316 (2009)
20. Karger-Kocsis J and Wu CM, Polym Eng Sci 44:1083-1083 (2004)
21. Mousa A and Karger-Kocsis J, Macromol Mater Eng 286:260-266 (2001)
22. Boonstra BB, Reinforcement by fillers, in Rubber Technology and Manufacture, 2nd edition, ed. by Blow CM and Hepburn C. Butterworths, London, pp. 269-308 (1982).
23. Bansal A, Yang H, Li C, Cho K, Benicewicz BC, Kumar SK, et al, Nature Mater 4:693-698 (2005)
24. Bansal A, Yang H, Li C, Benicewicz BC, Kumar SK and Schadler LS, J Polym Sci B: Polym Phys 44:2944-2950 (2006)
25. Acha AB, Reboredo MM and Marcovich EN, Composites A 38:1507-1516 (2007)
26. Ferry JD, Dependence of viscoelastic behaviour on temperature and pressure, in Viscoelastic Properties of Polymers, 3rd edition. John Wiley, New York, pp. 264-320 (1980).
27. Futamura S, Rubber Chem Technol 64:57-64 (1990)