A comparison of warm asphalt binder aging with laboratory aging procedures

Journal of Testing and Evaluation

Volumn 38, Issue 1, 2010, Pages

  Gandhi, Tejash ^a   Akisetty, Chandrakiran ^a   Amirkhanian, Serji ^b  

^a CLEMSON UNIVERSITY   (United States)

^b AMRL   (United States)

Author keywords

Binder aging; Binder extraction; PAV; RTFO; Warm asphalt

Indexed keywords

AGING CHARACTERISTICS; ASPHALT AGING; ASPHALT BINDERS; ASPHALT MIXTURE; COMPACTION TEMPERATURE; FATIGUE PROPERTIES; HOT MIX ASPHALT; PAV; PRESSURE AGING VESSEL; ROLLING THIN FILM OVENS; RTFO; STIFFNESS VALUES; WARM ASPHALT ADDITIVE;

AGING OF MATERIALS; ASPHALT; ASPHALT PAVEMENTS; CHROMATOGRAPHIC ANALYSIS; GELS; MIXTURES;

BINDERS;

EID: 77953250927     PISSN: 00903973     EISSN: None     Source Type: Journal    
DOI: 10.1520/JTE101934     Document Type: Article

References (29)

1. Australian Asphalt Pavement Association, "Warm Mix Asphalt-A State-of-the-Art Review", Advisory Note No. 17, Australian Asphalt Pavement Association, Cincinnati, OH, 2001, available online at http://www.aapa.asn. au/content/aapa/download/advisorynote17.pdf (Last accessed 1 Jan. 2007).
2. Rajagopal, A., "Comparison and Definition of State DOT's Practices in Selection of Materials for Pavements", Report No. FHWA-OH-2004-011, Final Report prepared in cooperation of The Ohio Department of Transportation and the Federal Highway Administration, 2004.
3. Kristjansdottir, O., 2006, "Warm Mix Asphalt for Cold Weather Paving", M. S. thesis, University of Washington, Seattle, WA.
4. Barthel, W., Marchand, J. P., and Devivere, M., "Warm Asphalt Mixes by Adding a Synthetic Zeolite", Eurovia, available at www.asphamin. com (Last accessed 1 Jan. 2007).
5. ® for Use in Warm Mix Asphalt", NCAT Report No. 05-06, Auburn, AL, 2005a.
6. ® for Use in Warm Mix Asphalt", NCAT Report No. 05-04, Auburn, AL, 2005b.
7. ® for Use in Warm Mix Asphalt", NCAT Report No. 06-02, Auburn, AL, 2006a.
8. Hurley, G. and Prowell, B., "Evaluation of Potential Process for Use in Warm Mix Asphalt", Electron. J. Assoc. Asph. Paving Technol., Vol. 75, 2006b, pp. 41-90.
9. Eurovia Services, Asphalt Mix with Asphamin, http://www.eurovia.com/en/ produit/135.aspx (Last accessed Jan. 2007).
10. Sasol Wax, Sasobit Technology, http://www.sasolwax.com/sasobit- technology.html (Last accessed Jan. 2007).
11. AASHTO T240, 2004, "Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin Film Oven Test)", American Association of State Highway Transportation Officials, Washington, D. C.
12. AASHTO R28, 2004, "Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)", American Association of State Highway Transportation Officials, Washington, D. C.
13. Gandhi, T. S., Akisetty, C., and Amirkhanian, S. N., "Laboratory Evaluation of Warm Asphalt Binder Aging Characteristics", Int. J. Pavement Eng., Vol. 99999, No. 1, 2008, pp. 1-1, available at http://prod.informaworld. com/10.1080/10298430802342724 (Last accessed 1 Dec. 2008).
14. AASHTO T316, 2004, "Viscosity Determination of Asphalt Binder Using Rotational Viscometer", American Association of State Highway Transportation Officials, Washington, D. C.
15. AASHTO T315, 2004, "Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)", American Association of State Highway Transportation Officials, Washington, D. C.
16. AASHTO T313, 2004, "Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)", American Association of State Highway Transportation Officials, Washington, D. C.
17. ASTM Standard D2172, 2005, "Standard Test Methods for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures", Annual Book of ASTM Standards, Vol. 04. 03, ASTM International, West Conshohocken, PA.
18. ASTM Standard D5404, 2005, "Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator", Annual Book of ASTM Standards, Vol. 04. 03, ASTM International, West Conshohocken, PA.
19. AASHTO R30, 2004, "Standard Practice for Mixture Conditioning of Hot Mix Asphalt", American Association of State Highway Transportation Officials, Washington, D. C.
20. Kim, K. W., Kim, K., Doh, Y. S., and Amirkhanian, S. N., "Estimation of RAP's Binder Viscosity Using GPC Without Binder Recovery", J. Mater. Civ. Eng., Vol. 18, No. 4, 2006, pp. 561-567.
21. Bynum, D. and Traxler, R. N., "Gel Permeation Chromatog-raphy Data on Asphalts Before and After Service in Pavements", Proceedings of the Association of Asphalt Paving Technologists, Vol. 39, 1970, Association of Asphalt Paving Technologists, Lino Lakes, MN, pp. 683-702.
22. Jennings, P. W., "High Pressure Liquid Chromatography as a Method of Measuring Asphalt Composition", Federal High-wayAdministration Report No. FHWA-MT-7930, Department of Chemistry, Montana State University, 1980.
23. Jennings, P. W. and Pribanic, J. A. S., "The Expanded Mon-tanaAsphalt Quality Study Using High Pressure Liquid Chro-matography", Research Report No. FHWAMT 85-011, Montana Department of Highways, Helena, MT, 1985.
24. Garrick, N. W. and Wood, L. E., "Predicting Asphalt Properties from HP-GPC Profiles", Proceedings of the Association of Asphalt Paving Technologists, Vol. 57, 1988, Association of Asphalt Paving Technologists, Lino Lakes, MN.
25. Price, R. P., 1988, "A Quantitative Method to Characterize Asphalts and Modified Asphalts Using High Pressure Gel Permeation Chromatography", Ph. D. Dissertation, Clemson University, Clemson, SC.
26. Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., and Kennedy, T. W., Hot Mix Asphalt Materials, Mixture Design, and Construction, National Asphalt Pavement Association Education Foundation, Lanham, MD, 1996.
27. Al-Abdulwahhab, H. I., Asi, I. M., Ali, F. M., and Al-Dubabi, I. A., "Prediction of Asphalt Rheological Properties Using HP-GPC", J. Mater. Civ. Eng., Vol. 11, No. 1, February 1999, pp. 6-14.
28. Kim, K. W. and Burati, J. L., "Use of GPC Chromatograms to Characterize Aged Asphalt Cements", J. Mater. Civ. Eng., Vol. 5, No. 1, 1993, pp. 41-52.
29. Kim, K. W., Burati, J. L., and Amirkhanian, S. N., "Relation of HP-GPC Profile with Mechanical Properties of AC Mixtures", J. Mater. Civ. Eng., Vol. 5, No. 4, 1993, pp. 447-459.