Changes in tribological performance of high molecular weight high density polyethylene induced by the addition of molybdenum disulphide particles

Wear

Volumn 269, Issue 1-2, 2010, Pages 31-45

  Pettarin, Valeria ^a   Churruca, Maria Jose ^a   Felhös, Dávid ^b   Karger Kocsis, Joseph ^c   Frontini, Patricia Maria ^a  

^a UNIVERSIDAD NACIONAL DE MAR DEL PLATA   (Argentina)

^b UNIVERSITY OF MISKOLC   (Hungary)

^c TSHWANE UNIVERSITY OF TECHNOLOGY   (South Africa)

Author keywords

Fracture toughness; Lubricant additives; Polymer matrix composite; Sliding wear; Stress strain behavior; Three body abrasion

Indexed keywords

ABRASIVE WEARS; ADHESIVE WEARS; COEFFICIENT OF FRICTIONS; DYNAMIC CONDITION; FRACTURE BEHAVIOR; FRACTURE MODE; HIGH MOLECULAR WEIGHT; HIGH STRAINS; KINETIC COEFFICIENT OF FRICTION; LOW STRAINS; LUBRICANT ADDITIVES; MICROHARDNESS MEASUREMENT; MICROSCOPICAL OBSERVATION; MOLYBDENUM DISULPHIDE; PLATE TEST; QUASI-STATIC CONDITIONS; SCRATCH TESTING; SEM; SLIDING CONDITIONS; SLIDING WEAR; STRESS-STRAIN; STRESS-STRAIN BEHAVIOR; STRESS-STRAIN BEHAVIORS; SURFACE HARDNESS; SURFACE MELTING; THREE BODY ABRASION; TRANSFER FILM; TRIBOLOGICAL BEHAVIORS; TRIBOLOGICAL PARAMETERS; TRIBOLOGICAL PERFORMANCE; WEAR CONDITION; WEAR MECHANISMS; WEAR PERFORMANCE; WEAR RATES;

ABRASION; ABRASIVES; BRITTLE FRACTURE; DUCTILE FRACTURE; FILLERS; FRACTURE TOUGHNESS; FRICTION; HARDNESS TESTING; MECHANICAL PROPERTIES; MOLECULAR WEIGHT; MOLYBDENUM; MOLYBDENUM COMPOUNDS; POLYETHYLENES; POLYMER MATRIX COMPOSITES; POLYMERS; ROLLING; SOLID LUBRICANTS; STRAIN; SURFACE TESTING; THERMOPLASTICS; TRIBOLOGY;

WEAR RESISTANCE;

EID: 77953128439     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2010.03.006     Document Type: Article

References (72)

1. Feldman D., and Barbalata A. Synthetic Polymers: Technology, Properties, Applications (1996), Springer, New York
2. Palabiyik M., and Bahadur S. Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers. Wear 253 (2002) 369-376
3. Krishnaswamy R.K. Structure-Property relationships in HMW-HDPE blown films. Proceedings of Society of Plastics Engineers Annual Technical Conference (ANTEC). Dallas (2001) pp. 111-115
4. Chanda M., and Roy S.K. Plastics Technology Handbook (1998), Marcel Dekker, New York
5. http://www.nylaplas.com/plastics/cestilene.html.
6. Anderson J.C. High density and ultra-high molecular weight polyethenes: their wear properties and bearing applications. Tribology International 15 (1982) 43-47
7. Voss H., and Friedrich K. The wear behavior of short fiber reinforced thermoplastics sliding against smooth steel surfaces. In: Ludema K.C. (Ed). Wear of Materials (1985), ASME, New York 742-750
8. Tanaka K. Effect of various fillers on the friction and wear of PTFE-based composites. In: Friedrich K. (Ed). Friction and Wear of Polymer Composites (1986), Elsevier, Amsterdam 205-232
9. Bahadur S., Gong D., and Anderegg J.W. The role of copper compounds as fillers in transfer film formation and wear of nylon. Wear 154 (1992) 207-223
10. Bahadur S. The development of transfer layers and their role in polymer tribology. Wear 245 (2000) 92-99
11. Briscoe B., Yoo L.H., and Stolarski T.A. The friction and wear of poly(tetrafluorethylene)-poly(etherketone) composites: an initial appraisal of the optimum composition. Wear 108 (1986) 357-374
12. Bahadur S., and Gong D. The transfer and wear of nylon and CuS-nylon composites: filler proportion and counterface characteristics. Wear 162-164 (1993) 397-406
13. Bahadur S., and Tabor D. The wear of filled polytetrafluoroethylene. Wear 98 (1984) 1-13
14. Bahadur S., and Gong D. The role of copper compounds as fillers in the wear behavior of polyetheretherketone. Wear 154 (1992) 151-165
15. 2 and PbS fillers on the tribological behavior of nylon 11. Wear 155 (1992) 49-61
16. 2 fillers on the transfer and wear of nylon by microscopy and XPS analysis. Wear 197 (1996) 271-279
17. L. Zhang, The role of particulate inorganic fillers on the tribological behavior of polyester, MS Thesis, Iowa State University, 1995.
18. Briscoe B.J., Pogosian A.K., and Tabor D. The friction and wear of high-density polyethylene: the action of lead oxide and copper oxide fillers. Wear 27 (1974) 19-34
19. Tong J., Ma Y., and Jiang M. Effects of the wollastonite fiber modification on the sliding wear behavior of the UHMWPE composites. Wear 255 1-6 (2003) 734-741
20. Bijwe J., John Rajesh J., Jeyakumar A., Ghosh A., and Tewari U.S. Influence of solid lubricants and fibre reinforcement on wear behaviour of polyethersulphone. Tribology International 33 10 (2000) 697-706
21. Unal H., Mimaroglu A., Kadi{dotless}oglu U., and Ekiz H. Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions. Materials and Design 25 3 (2004) 239-245
22. Bahadur S., and Gong D. The action of fillers in the modification of the tribological behavior of polymers. Wear 158 (1992) 41-58
23. Winer W.O. Molybdenum disulphide as a lubricant: a review of fundamental knowledge. Wear 10 (1967) 422-452
24. 2-filled nylon 6. Wear 151 (1991) 111-118
25. Zhu P., Wang X., Wang X.-d., Huang P., and Shi J. Tribology performance of molybdenum disulphide reinforced thermoplastic polyimide under dry and water lubrication conditions. Industrial Lubrication and Tribology 58 (2006) 195-201
26. Bahadur S., and Tabor D. Role of fillers in the friction and wear behavior of high-density polyethylene. Polymer Wear and Its Control (1985), American Chemical Society Publication pp. 253-268
27. Guofang G., Yang H., and Fu X. Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding. Wear 256 1-2 (2004) 88-94
28. Rabinowicz E. Friction and Wear of Materials (1995), John Wiley & Sons, New York
29. Gungor A. Mechanical properties of iron powder filled high density polyethylene composites. Materials and Design 28 (2007) 1027-1030
30. http://www.leripa.at/products/index.php?action=view&entity=detail&key=7&sitelang=en.
31. Brown M.E. Introduction to Thermal Analysis: Techniques and Applications. 2nd edition (2001), Kluwer Academic Publishers 245
32. Wunderlich B. Macromolecular Physics vol. 3 (1980), New York Academic Press, New York
33. Blau P.J. Wear testing. In: Davis J.R. (Ed). Metals Handbook (1998), ASM International Handbook Committee 1342-1347
34. Felhös D., Karger-Kocsis J., and Xu D. Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steel. Journal of Applied Polymer Science 108 (2008) 2840-2851
35. Friedrich K. Friction and Wear of Polymer Composites (1986), Elsevier Science, Amsterdam
36. ASTM D 1894-93: Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting.
37. Cayer-Barrioz J., Mazuyer D., Tonck A., Kapsa Ph., and Chateauminois A. Nanoscratch and friction: an innovative approach to understand the tribological behaviour of poly(amide) fibres. Tribology International 39 (2006) 62-69
38. ASTM G 65-91: Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus.
39. ASTM D 638-03: Standard Test Method for Tensile Properties of Plastics.
40. Sawyer L.C., and Grubb D.T. Polymer Microscopy (1992), Chapman & Hall, London
41. Zamfirova G., Perena J.M., Benavente R., Perez E., Cerrada M.L., and Nedkov E. Mechanical properties of ultra high molecular weight polyethylene obtained with different cocatalyst systems. Polymer Journal 34 (2002) 125-131
42. Wang J., and Gu M. Wear properties and mechanisms of nylon and carbon-fiber-reinforced nylon in dry and wet conditions. Journal of Applied Polymer Science 93 (2004) 789-795
43. Bahadur S., Fu Q., and Gong D. The effect of reinforcement and the synergism between CuS and carbon fiber on the wear of nylon. Wear 178 (1994) 123-130
44. Bahadur S., and Polineni V.K. Tribological studies of glass fabric-reinforced polyamide composites filled with CuO and PTFE. Wear 200 (1996) 95-104
45. Unal H., and Mimaroglu A. Friction and wear behaviour of unfilled engineering thermoplastics. Materials and Design 24 (2003) 183-187
46. da Silva C.H., Tanaka D.K., and Sinatora A. The effect of load and relative humidity on friction coefficient between high density polyethylene on galvanized steel-preliminary results. Wear 225-229 (1999) 339-342
47. Unal H., Sen U., and Mimaroglu A. Abrasive wear behaviour of polymeric materials. Materials and Design 26 (2005) 705-710
48. Tong J., Ma Y., Arnell R.D., and Ren L. Free abrasive wear behavior of UPE-HMW composites filled with wollastonite fibers. Composites Part A 37 (2006) 38-45
49. Zum Gahr K.-H. Wear by hard particles. Tribology International 31 (1998) 587-596
50. Rice J.R. A path independent integral and the approximate analysis of stress concentration by notches and cracks. Journal of Applied Mechanics 35 (1968) 379-386
51. Hale G.E., and Ramsteiner F. A testing protocol for conducting J-crack growth resistance curve tests on plastics. In: Moore C.R., Pavan A., and Williams J.G. (Eds). Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites (2001), ESIS Publication 28, Elsevier, The Netherlands 123-157
52. IC for medical grade ultra high molecular weight polyethylene. Polymer Engineering and Science 37 (1997) 11-17
53. ASTM D 5045-99: Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials.
54. IC) at moderately high loading rates (1 m/s).
55. Williams J.G. Fracture Mechanics of Polymers (1984), Ellis Horwood, London
56. Liu C., Ren L., Arnell R.D., and Tong J. Abrasive wear behavior of particle reinforced ultrahigh molecular weight polyethylene composites. Wear 225-229 (1999) 199-204
57. http://www.ferret.com.au/c/Dotmar-EPP/Ertalon-and-Nylatron-from-Dotmar-EPP-n735215.
58. Tracz A., Kucinska I., and Jeszka J.K. Unusual crystallization of polyethylene at melt/atomically flat interface: lamellar thickening growth under normal pressure. Polymer 47 (2006) 7251-7258
59. Khedkar J., Negulescu I., and Meletis E.I. Sliding wear behavior of PTFE composites. Wear 252 (2002) 361-369
60. Friedrich K., Zhang Z., and Schlarb A.K. Effects of various fillers on the sliding wear of polymer composites. Composites Science and Technology 65 (2005) 2329-2343
61. Dasari A., Yu Z.-Z., Mai Y.-W., Hu G.-H., and Varlet J. Clay exfoliation and organic modification on wear of nylon 6 nanocomposites processed by different routes. Composites Science and Technology 65 (2005) 2314-2328
62. Briscoe B.J. Wear of polymers: an essay on fundamental aspects. Tribology International 14 (1984) 231-243
63. Godet M. The third-body approach: a mechanical view of wear. Wear 100 (1984) 437-452
64. 2, ZnO, CuO and SiC. Wear 258 (2005) 1411-1421
65. Belyi V.A., Sviridyonok A.I., Smurugov V.A., and Nevzorav V.V. Adhesive wear of polymers. In: Glaeser W.A., Ludema K.C., and Rhee S.K. (Eds). Wear of Materials (1977), ASME, New York 526-541
66. Bahadur S., Gong D., and Anderegg J.W. Tribomechanical studies by XPS analysis of the transfer film of nylon 11 and its composites. Wear 160 (1993) 131-138
67. Vande Voort J., and Bahadur S. The growth and bonding of transfer film and the role of CuS and PTFE in the tribological behavior of PEEK. Wear 181-183 (1995) 212-221
68. 2. Wear 160 (1993) 131-138
69. Bahadur S., Zhang L., and Anderegg J.W. The effect of Zinc and copper oxides and other zinc compounds as fillers on the tribological behavior of thermosetting polyester. Wear 203-204 (1997) 464-473
70. Hu X.G., Hu S.L., and Zhao Y.S. Synthesis of nanometric molybdenum disulphide particles and evaluation of friction and wear properties. Lubrication Science 17 (2005) 295-308
71. 2 particles. Composites Science and Technology 68 (2008) 734-742
72. 2 nanoparticles as a superior solid lubrication mechanism in composite matrices. Advanced Engineering Materials 3 (2001) 71-75