Cold operation with optical and numerical investigations on a low compression ratio diesel engine

SAE International Journal of Engines

Volumn 2, Issue 2, 2010, Pages 186-204

  Walter, B ^a   Perrin, H ^a   Dumas, J P ^a   Laget, O ^a  

^a IFP ENERGIES NOUVELLES   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CFD (COMPUTATIONAL FLUID DYNAMICS); COMBUSTION ANALYSIS; COMBUSTION NOISE; COMBUSTION PRO-CESS; COMPRESSION RATIOS; ENGINE SPEED; FIRST ORDER; GLOW PLUG; HARDWARE CONFIGURATIONS; HEAT RELEASE; HIGH THERMAL; HIGH-SPEED VISUALIZATION; KEY FACTORS; MAIN PARAMETERS; NUMERICAL INVESTIGATIONS; PILOT INJECTION; SPRAY INTERACTION; TEMPERATURE STRATIFICATION; TRANSPORT MARKET; UNBURNED HYDROCARBONS; VOLUMETRIC COMPRESSIONS;

CALIBRATION; CARBON DIOXIDE; CARBON MONOXIDE; COMBUSTION; COMBUSTION CHAMBERS; COMPUTATIONAL FLUID DYNAMICS; ENGINE CYLINDERS; GAS EMISSIONS; HYDROCARBONS; LEAD OXIDE; LEAKAGE (FLUID); NITRIC OXIDE; NITROGEN OXIDES; PARTICULATE EMISSIONS; VISUALIZATION;

DIESEL ENGINES;

EID: 77953039220     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2009-01-2714     Document Type: Article

References (25)

1. Körfer T., Lamping M., Rohs H., Adolph D., Pischinger S., Wix K., The Future Power Density of HSDI Diesel Engines with Lowest Engine out Emissions - A Key Element for Upcoming CO2 Demands, Fisita F2008-06-015, 2008
2. Thirouard M., Mendez S., Pacaud P., Chmielarczyk V., Ambrazas D., Garsi C., Lavoisier F., Barbeau B., Potential to improve specific power using very high injection pressure in HSDI Diesel engines, SAE, paper 2009-01-1524, 2009
3. TM Concept Using Dual Mode Combustion to Achieve Zero NOx and Particulate Emissions, SAE, paper 2002-01-1744, 2002
4. Sakato I, Nagae M., Omae K., Ito H., A new Combustion Concept for passenger car Diesel based on a low compression Ratio, 15th Aachener Kolloquium Fahrzeug - und Motorentechnik, October 2006
5. Lindl B. and Schmitz H.G., Cold Start Equipment for Diesel Direct Injection Engines, SAE, paper 1999- 01-1244, 1999
6. Naber et al., Robert Bosch GmbH, Cold Start and Cold Idle Investigations for Direct Injected Passenger Car Diesel Engines, Aachener Kolloquium Fahrzeug und Motorentechnik, 2006.
7. Pacaud P., Perrin H., Laget O., Cold Start on Diesel engine: is Low Compression Ratio compatible with Cold start Requirement?, SAE, paper 2008-01-1310, 2008
8. Heywood, J B, International Combustion Engine Fundamentals, McGraw-Hill Book Company, 1988 pp 510 203
9. Zolver M., Klahr D., Bohbot J., Laget O., Torres A., Reactive CFD in engines with a new unstructured parallel solver, Oil & Gas Sci. and Tech. 58(1), 2003, pp 33-46.
10. Amsden A.A., O'Rourke P.J., Butler T.D., KIVA-II, a Computer Program for Chemically Reactive Flows with Sprays, Report LA-11560-MS, Los Alamos National Laboratory,1989
11. Hirt C.W., Amsden A.A., Cook J.L., J. Comput. Phys. pp 14, pp 227, 1974
12. Pracht W.E., J. Comput. Phys. pp 17, pp 132, 1975
13. Colin O., Benkenida A., The 3-zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion, Oil & Gas Sci. and Tech., 59(6), pp 593-609, 2004
14. Colin O., Pires de Cruz A., Jay S., Detailed chemistry based auto-ignition model including low temperature phenomena applied to 3-D engine calculations, Proceedings of the Combustion Institute, 30, pp 2649-2656, 2005
15. th Annual conference, Irvine, USA, 2005
16. Habchi C., Verhoeven D., Huynh Huu C., Lambert L., Vanhemelryck J.L., Baritaud T., Modeling Atomization and Break Up in High-Pressure Diesel Spray, SAE, paper 970881, 1997
17. Tsunemoto H., Yamada T., Ishitani H., Behavior of Adhering Fuel on Cold Combustion Chamber Wall in Direct Injection Diesel Engine, SAE, paper 861235, 1986
18. Stanton D.W., Lippert A.M., Reitz R.D., Influence of Spray-Wall Interaction and Fuel Films on Cold Starting In Direct Injection Diesel Engines, SAE, paper 982584, 1998
19. O'Rourke P.J. and Amsden A.A., A Particule Numerical Model for Wall Fluid Dynamics in Port- Injected Engines, SAE, paper 961961, 1996
20. O'Rourke P.J. and Amsden A.A., A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model, SAE, paper 2000-01-0271, 2000
21. Han Z., Xu Z. and Trigui N., Spray/Wall interaction Models for Multidimentional Engine Simulation, Int. J. Engine Research, Vol. 1, N° 1.2000, pp 127-146.
22. Han Z. and Xu Z., Wall film Dynamics Modelling for impinging Sprays in engines, SAE, paper 2004-01- 0099, 2004
23. Buda F., Bounaceur R., Warth V., Glaude P.A., Fournet R., Battin-Leclerc F., Progress toward a unified detailed kinetic model for the autoignition of alkanes from C4 to C10 between 600 and 1200 K, Combustion and flame, Vol. 142, pp. 170-186, 2005.
24. Lippert A.M., Stanton D.W., Rutland C.J., Halett W.L.H., Reitz R.D., Multidimensional simulation of Diesel engine cold start with advanced physical sub models, IMechE 2000 Vol 1 - n°1
25. Nishimura M., Tanaka Y., Miyaki M., Benefits of New Fuel Injection System Technology on Cold Startability of Diesel Engines, SAE, paper 940586, 1994.