Crystallization behavior of poly(L-lactic acid)-based ecocomposites prepared with kenaf fiber and rice straw

Polymer Composites

Volumn 31, Issue 6, 2010, Pages 974-984

  Dobreva, T ^a   Perena, J M ^a   Perez E ^a   Benavente, R ^a   Garcia M ^b  

^a INSTITUTO DE CIENCIA Y TECNOLOGÍA DE POLÍMEROS   (Spain)

^b TECNALIA RESEARCH AND INNOVATION   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

AMORPHOUS SAMPLES; CRYSTALLINITIES; CRYSTALLIZATION BEHAVIOR; CRYSTALLIZATION RATES; CRYSTALLIZATION TEMPERATURE; ECO-COMPOSITES; END-USES; ENVIRONMENTALLY-FRIENDLY; HIGH CRYSTALLINITY; HIGHER TEMPERATURES; ISOTHERMAL CRYSTALLIZATION; MELTING TEMPERATURES; PLLA; POLY L LACTIC ACID; PRODUCTION CYCLE; RATE OF CRYSTALLIZATION; RICE STRAWS; THERMAL BEHAVIORS; LOWER TEMPERATURES;

BODY FLUIDS; CRYSTALLIZATION; HEMP; LACTIC ACID; NATURAL FIBERS; ORGANIC ACIDS; RAPID SOLIDIFICATION; FIBERS;

KENAF FIBERS;

HEMP; KENAF; LACTIC ACID; NATURAL FIBERS; ORGANIC ACIDS; SOLIDIFICATION; COMPOSITES; COOLING; CRYSTALLIZATION; MELTING; NUCLEATION; PIGMENT; RICE STRAW;

EID: 77952967166     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.20882     Document Type: Article

References (67)

1. A.P. Gupta and V. Kumar, Eur. Polym. J., 43, 4053 (2007).
2. J.C. Middleton and A.J. Tipton, Biomaterials, 21, 2335 (2000).
3. N. Ignjatovic, E. Suljovrujic, J. Budinski-Simendic, I. Krakovsky I, and D. Uskokovic, J. Biomed. Mater. Res. B Appl. Biomater., 71, 284 (2004).
4. E. Vink, K. Rabago, D. Glassner, and P. Gruber, Polym. Degrad. Stab., 80, 403 (2003).
5. A. Leão, S.M. Sartor, and J.C. Caraschi, Mol. Cryst. Liq. Cryst., 448, 161 (2006).
6. G. Bogoeva-Gaceva, M. Avella, M. Malinconico, A. Buzarovska, A. Grozdanov, G. Gentille, and M.E. Errico, Polym. Compos., 28, 98 (2007).
7. S.W. Kim, S.H. Lee, J.S. Kang, and K.H. Kang, Int. J. Thermophys., 27, 1873 (2006).
8. N.W. Choi, I. Mori, and Y. Ohama, Waste Manage., 26, 189 (2006).
9. W. Qiu, F. Zhang, T. Endo, and T. Hirotsu, J. Appl. Polym. Sci., 87, 337 (2003).
10. A. Grozdanov, A. Buzarovska, G. Bogoeva-Gaceva, M. Avella, M.E. Errico, and G. Gentille, Agron. Sustain. Dev., 26, 251 (2006).
11. P. Toro, R. Quijada, O. Murillo, and M. Yazdani-Pedram, Polym. Int., 54, 730 (2005).
12. N. Reddy, A. Salam, and Y. Yang, Macromol. Mater. Eng., 292, 458 (2007).
13. S. Amaducci, M.T. Amaducci, R. Benati, and G. Venturi, Ind. Crops Prod., 11, 179 (2000).
14. D.S. Chaudhary, M.C. Jollands, and F. Cser, Adv. Polym. Technol., 23, 147 (2004).
15. N. Reddy and Y. Yang, Trends Biotechnol., 23, 22 (2005).
16. B.S. Ndazi, S. Karlsson, J.V. Tesha, and C.W. Nyahumwa, Compos. A, 38, 925 (2007).
17. A.M. Mohd. Edeerozey, H.M. Akil, A.B. Azhar, and M.I. Zainal Arriffin, Mater. Lett., 61, 2023 (2007).
18. B. Ndazi, J.V. Tesha, and E.T.N. Bisanda, J. Mater. Sci., 41, 6984 (2006).
19. T. Ohkita and S. Lee, J. Adhes. Sci. Technol., 18, 905 (2004).
20. M.S. Huda, A.K. Mohanty, L.T. Drzal, E. Schut, and M. Misra, J. Mater. Sci., 40, 4221 (2005).
21. M.S. Huda, L.T. Drzal, A.K. Mohanty, and M. Misra, Compos. B, 38, 367 (2007).
22. K. Oksman, M. Skrifvars, and J.F. Selin, Compos. Sci. Technol., 63, 1317 (2003).
23. T. Nishino, K. Hirao, M. Kotera, K. Nakamae, and H. Inagaki, Compos. Sci. Technol., 63, 1281 (2003).
24. S. Serizawa, K. Inoue, and M. Iji, J. Appl. Polym. Sci., 100, 618 (2006).
25. T. Nishino, K. Hirao, and M. Kotera, Compos. A, 37, 2269 (2006).
26. R. Liao, B. Yang, W. Yu, and C. Zhou, J. Appl. Polym. Sci., 104, 310 (2007).
27. J.R. Sarasua, A.L. Arraiza, P. Balerdi, and I. Maiza, J. Mater. Sci., 40, 1855 (2005).
28. J. Cho, S. Baratian, J. Kim, F. Yeh, B.S. Hsiao, and J. Runt, Polymer, 44, 711 (2003).
29. T. Ke and X. Sun, J. Appl. Polym. Sci., 89, 1203 (2003).
30. Z.G. Wang, X. Wang, S.H. Benjamin, S. Andjelíc, D. Jamiolkowski, J. McDivitt, J. Fisher, J. Zhou, and C.C. Han, Polymer, 42, 8965 (2001).
31. M. Avella, G. Bogoeva-Gaceva, A. Buîzarovska, M.E. Errico, G. Gentile, and A. Grozdanov, J. Appl. Polym. Sci., 108, 3542 (2008).
32. A. Schindler and D. Harper, J. Polym. Sci. Part A: Polym. Chem., 17, 2593 (1979).
33. M. Pyda, R.C. Bopp, and B. Wunderlich, J. Chem. Thermodyn., 36, 731 (2004).
34. J.F. Mano, Y. Wang, J.C. Viana, Z. Denchev, and M.J. Oliveira, Macromol. Mater. Eng., 289, 910 (2004).
35. Y.T. Shieh and G.L. Liu, J. Polym. Sci. Part B: Polym. Phys., 45, 466 (2007).
36. Y. Wang and J.F. Mano, Eur. Polym. J., 41, 2335 (2005).
37. Y. Wang and J.F. Mano, J. Therm. Anal. Calorimetry, 80, 171 (2005).
38. F.H. Sánchez, J.M. Mateo, J.R. Colomer, M.S. Sánchez, J.L.G. Ribelles, and J.F. Mano, Biomacromolecules, 6, 3283 (2005).
39. X. Ling and J.E. Spruiell, J. Polym. Sci. Part B: Polym. Phys., 44, 3200 (2006).
40. M.L. Di Lorenzo, Eur. Polym. J., 41, 569 (2005).
41. Y. Wang, S.S. Funari, and J.F. Mano, Macromol. Chem. Phys., 207, 1262 (2006).
42. R. Picciochi, Y. Wang, N.M. Alves, and J.F. Mano, Colloid Polym. Sci., 285, 575 (2007).
43. M. Arnoult, E. Dargent, and J.F. Mano, Polymer, 48, 1012 (2007).
44. Y. Wang, J.L.G. Ribelles, M.S. Sánchez, and J.F. Mano, Macromolecules, 38, 4712 (2005).
45. A. Marcinîcin, K. Ujhelyiová, K. Marcinîcin, and P. Alexy, J. Therm. Anal., 46, 581 (1996).
46. L. Mandelkern, Crystallization of Polymers, McGraw-Hill, New York (1964).
47. J.D. Hoffman, G.T. Davis, and J.I. Lauritzen, in Treatise of Solid State Chemistry, Vol.3, N.B. Hannay (Ed.), Plenum, New York, Ch. 7, 497 (1976).
48. T. Miyata and T. Masuko, Polymer, 39, 5515 (1998).
49. I. Iannace and L. Nicolais, J. Appl. Polym. Sci., 64, 911 (1997).
50. Y. He, Z. Fan, Y. Hu, T. Wu, J. Wei, and S. Li, Eur. Polym. J., 43, 4431 (2007).
51. G. Kortaberria, C. Marieta, A. Jimeno, P. Arruti, and I. Mondragon, J. Microsc., 224, 277 (2006).
52. M.L. Di Lorenzo, Macromol. Symp., 234, 176 (2006).
53. M. Avrami, J. Chem. Phys., 7, 1103 (1939)
54. M. Avrami, J. Chem. Phys., 8, 212 (1940)
55. M. Avrami, J. Chem. Phys., 9, 177 (1941).
56. P. Pan, B. Bo Zhu, W. Kai, S. Serizawa, M. Iji, and Y. Inoue, J. Appl. Polym. Sci., 105, 1511 (2007).
57. M.L. Di Lorenzo, J. Appl. Polym. Sci., 100, 3145 (2006).
58. T.Y. Cho and G. Strobl, Polymer, 47, 1036 (2006).
59. P. Pan, B. Zhu, W. Kai, T. Dong, and Y. Inoue, J. Appl. Polym. Sci., 107, 54 (2008).
60. Y. Ohtani, K. Okumura, and A. Kawaguchi, J. Macromol. Sci. Part B: Phys., 42, 875 (2003).
61. J.M. Zhang, Y. Duan, H. Sato, H. Tsuji, I. Noda, S. Yan, and Y. Ozaki, Macromolecules, 38, 8012 (2005).
62. M. Yasuniwa, S. Tsubakihara, K. Iura, Y. Ono, Y. Dan, and K. Takahashi, Polymer, 47, 7554 (2006).
63. P. De Santis and J. Kovacs, Biopolymers, 6, 299 (1968).
64. W. Hoogsteen, A.R. Postema, A.J. Pennings, G. tenBrinke, and P. Zugenmaier, Macromolecules, 23, 634 (1990).
65. J. Kobayashi, T. Asahi, M. Ichiki, A. Okikawa, H. Suzuki, T. Watanabe, E. Fukada, and Y. Shikinami, J. Appl. Phys., 77, 2957 (1995).
66. T. Miyata and T. Masuko, Polymer, 38, 4003 (1997).
67. C. Alemán, B. Lotz, and J. Puiggali, Macromolecules, 34, 4795 (2001).