Ductile fracture characterization of aluminum alloy 2024-T351 using damage plasticity theory

International Journal of Applied Mechanics

Volumn 1, Issue 2, 2009, Pages 267-304

  Xue, Liang ^a,b   Wierzbicki, Tomasz ^a  

^a Massachusetts Institute of Technology   (United States)

^b Northwestern University   (United States)

Author keywords

aluminum alloy; constitutive behavior; damage plasticity theory; Ductility fracture; elastic plastic material

Indexed keywords

CALIBRATION PROCEDURE; CONSTITUTIVE BEHAVIORS; DAMAGE EVOLUTION; DAMAGE PLASTICITY; DAMAGE RATE; DIFFERENT HEIGHTS; ELASTIC-PLASTIC MATERIAL; EQUIVALENT PLASTIC STRAIN; EXPERIMENTAL MEASUREMENTS; EXPERIMENTAL PROCEDURE; EXPERIMENTAL SETUP; FLAT PLATE; FRACTURE CHARACTERIZATION; FRACTURE ENVELOPE; FRACTURE PATTERN; FRICTION CONDITIONS; LOAD CONDITION; LOAD-DISPLACEMENT CURVE; LODE ANGLE; MATERIAL PARAMETER; NOTCH RADII; NOTCH SENSITIVITY; NOTCHED ROUND BARS; PRESSURE SENSITIVITIES; STRESS RANGE; STRESS STATE; UPSETTING TESTS;

ALUMINUM; ALUMINUM ALLOYS; CALIBRATION; FRICTION; HYDROSTATIC PRESSURE; PLASTIC DEFORMATION;

DUCTILE FRACTURE;

EID: 77952892166     PISSN: 17588251     EISSN: 1758826X     Source Type: Journal    
DOI: 10.1142/S1758825109000198     Document Type: Article

References (73)

1. C. M. Adams, Jr., Effective ductility in castings and weldments, in Ductility, Chap. 6 (American Society for Metals, Metals Park, Ohio, 1967), pp. 179-197.
2. Y. Bai and T. Wierzbicki, A new model of metal plasticity and fracture with pressure and Lode dependence, Int. J. Plasticity 24(6) (2008) 1071-1096. (Pubitemid 351400629)
3. Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triax-iality space, Int. J. Mech. Sci. 46 (2004a) 81-98.
4. Y. Bao and T. Wierzbicki, A comparative study on various ductile crack formation criteria, J. Engng. Mater. Tech.-Trans. ASME 126(3) (2004b) 314-324. (Pubitemid 40122745)
5. I. Barsoum and J. Faleskog, Rupture mechanisms in combined tension and shear-Experiments, Int. J. Solids Struct. 44 (2007a) 1768-1786. (Pubitemid 46161512)
6. I. Barsoum and J. Faleskog, Rupture mechanisms in combined tension and shear-Micromechanics, Int. J. Solids Struct. 44 (2007b) 5481-5498. (Pubitemid 47048220)
7. A. A. Benzerga, Micromechanics of coalescence in ductile fracture, J. Mech. Phys. Solids 50 (2002) 1331-1362. (Pubitemid 34295565)
8. A. A. Benzerga, J. Besson and A. Pineau, Anisotropic ductile fracture: Part I: experiments, Acta Mater. 52(15) (2004) 4623-4638.
9. C. A. Berg, The motion of cracks in plane viscous deformation, in The Fourth U.S. National Congress of Applied Mechanics, Vol. 2 (Berkeley, CA, 1962).
10. N. Bonora, Identification and measurement of ductile damage parameters, J. Strain Analysis 34(6) (1999) 463-478. (Pubitemid 30523629)
11. N. Bonora and A. Ruggiero, Micromechanical modeling of ductile cast iron incorporating damage Part I: ferritic ductile cast iron, Int. J. Solids Struct. 42 (2005) 1401-1424.
12. P. O. Bouchard, L. Bourgeon, H. Lachapèle, E. Maire, C. Verdu, R. Forestier and R. E. Logé, On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels, Mat. Sci. Eng.: A (in press) (2008).
13. P. W. Bridgman, Studies in Large Plastic Flow and Fracture (McGraw-Hill Inc, 1952).
14. S. B. Brown, K. H. Kim and L. Anand, An internal variable constitutive model for hot working of metals, Int. J. Plasticity 5 (1989) 95-130.
15. D. J. Celentano and J. L. Chaboche, Experimental and numerical characterization of damage evolution in steels, Int. J. Plasticity 23(10-11) (2007) 1739-1762. (Pubitemid 47212646)
16. J. L. Chaboche, Continuum damage mechanics: Part I-general concepts, J. Appl. Mech.-Trans. ASME 55 (1988a) 59-64. (Pubitemid 18590044)
17. J. L. Chaboche, Continuum damage mechanics: Part II-damage growth, crack initiation, and crack growth, J. Appl. Mech.-Trans. ASME 55 (1988b) 65-72. (Pubitemid 18590045)
18. C. C. Chu and A. Needleman, Void nucleation effects in biaxially stretched sheets, J. Engng. Mater. Tech. 102 (1980) 249-256. (Pubitemid 11484651)
19. D. P. Clausing, Effect of plastic strain state on ductility and toughness, Int. J. Frac. Mech. 6(1) (1970) 71-85.
20. R. de Borst and H. B. Mühlhaus, Gradient-dependent plasticity-formulation and algorithmic aspects, Int. J. Num. Meth. Engng. 35(3) (1992) 521-539.
21. X. Gao and J. Kim, Modeling of ductile fracture: Significance of void coalescence, Int. J. Solids Struct. 43 (2006) 6277-6293. (Pubitemid 46059256)
22. W. M. Garrison, Jr. and N. R. Moody, Ductile fracture, J. Phys. Chem. Solids 48(11) (1987) 1035-1074.
23. M. Gologanu, J. B. Leblond and J. Devaux, Approximate models for ductile metals containing non-spherical voids-case of axisymmetric prolate ellipsoidal cavities, J. Mech. Phys. Solids 41(11) (1993) 1723-1754.
24. A. L. Gurson, Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield critetria and flow rules for porous ductile media, J. Engng. Mater. Tech.-Trans. ASME 99 (1977) 2-15.
25. N. Hallbäck and F. Nilsson, Mixed-mode I/II fracture behaviour of an aluminium alloy, J. Mech. Phys. Solids 42(9) (1994) 1345-1374.
26. J. W. Hancock and D. K. Brown, On the role of stress and strain state in ductile failure, J. Mech. Phys. Solids 31(1) (1983) 1-24. (Pubitemid 13506293)
27. J. W. Hancock and A. C. Mackenzie, Mechanisms of ductile failure in high-strength steels subjected to multi-axial stress states, J. Mech. Phys. Solids 24(2-3) (1976) 147-160.
28. W. Johnson, The pressure for the cold extrusion of lubricated rod through square dies of moderate reduction at slow speeds, J. Institute of Metals 85 (1956) 403-408.
29. L. M. Kachanov, On the creep fracture time, Izv. Akad. Nauk USSR Otd. Tekh. 8 (1958) 26-31 (in Russian).
30. J. Kang, D. S. Wilkinson, M. Jain, J. D. Embury, A. J. Beaudoin, S. Kim, R. Mishira and A. K. Sachdev, On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754, Acta Mater. (2006) 209-218. (Pubitemid 41587908)
31. A. S. Kao, H. A. Kuhn, O. Richmond and W. A. Spitzig, Tensile fracture and frac-tographic analysis of 1045 spheroidized steel under hydrostatic pressure, J. Mat. Res. 5(1) (1990) 83-91. (Pubitemid 20667582)
32. J. Kim, X. Gao and T. S. Srivatsan, Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity, Eng. Frac. Mech. 71 (2004) 379-400. (Pubitemid 37332538)
33. J. Kim, G. Zhang and X. Gao, Modeling of ductile fracture: Application of the mechanism-based concepts, Int. J. Solids Struct. 44(6) (2007) 1844-1862. (Pubitemid 46161502)
34. J. Koplik and A. Needleman, Void growth and coalescence in porous plastic solids, Int. J. Solids Struct. 24 (1988) 835-853. (Pubitemid 18663826)
35. J. Lemaître, A continuous damage mechanics model for ductile fracture, J. Eng. Mater. Tech.-Trans. ASME 107 (1985) 83-89. (Pubitemid 15490348)
36. J. Lemaître and J. Dufailly, Damage measurements, Eng. Frac. Mech. 28(5-6) (1987) 643-661.
37. G. Le Roy, J. Embury, G. Edwards and M. F. Ashby, A model of ductile fracture based on the nucleation and growth of voids, Acta Metal. 29 (1981) 1509-1522. (Pubitemid 12437721)
38. N. Loizou and R. B. Sims, The yield stress of pure lead in compression, J. Mech. Phys. Solids 1 (1953) 234-243.
39. F. A. McClintock, A criterion for ductile fracture by growth of holes, J. Appl. Mech.-Trans. ASME 35 (1968) 363-371.
40. F. A. McClintock, Plasticity aspects of fracture, Fracture an Advanced Treatise, Chap. 2, Vol. III (Academic Press, New York and London, 1971), pp. 47-307.
41. K. Nahshon and J. W. Hutchinson, Modification of the Gurson model for shear failure, Euro. J. Mech. A/Solids 27 (2008) 1-17. (Pubitemid 350181489)
42. T. Pardoen and J. W. Hutchinson, An extended model for void growth and coalescence, J. Mech. Phys. Solids 48(12) (2000) 2467-2512.
43. T. Pardoen, Numerical simulation of low stress triaxiality ductile failure, Comput. and Struct. 84 (2006) 1641-1650. (Pubitemid 44247104)
44. D. M. Parks, private communication (2006).
45. G. Pijaudier-Cabot and Z. P. Bažant, Nonlocal damage theory, J. Engng. Mech. 113(10) (1987) 1512-1533.
46. K. E. Puttick, Ductile fracture in metals, Phil. Mag. 4 (1959) 964-969.
47. Y. N. Rabotnov, On the equations of state for creep, in Progress in Applied Mechanics-the Prager Anniversary Volume (MacMillan, New York, 1963), pp. 307-315.
48. A. R. Ragab, A model for ductile fracture based on internal necking of spheroidal voids, Acta Mater. 52 (2004a) 3997-4009.
49. A. R. Ragab, Application of an extended void growth model with strain hardening and void shape evolution to ductile fracture under axisymmetric tension, Eng. Frac. Mech. 71(11) (2004b) 1515-1534. (Pubitemid 38345827)
50. J. R. Rice and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solids 17 (1969) 201-217.
51. H. C. Rogers, Tensile fracture of ductile metals, Trans. Metallurgical Society of AIME 218 (1960) 498-506.
52. G. Rousselier, Ductile fracture models and their potential in local approach of fracture, Nuclear Engng. Design 105 (1987) 97-111. (Pubitemid 18553585)
53. K. Saanouni, On the numerical prediction of the ductile fracture in metal forming, Eng. Frac. Mech. 75(11) (2008) 3545-3559. (Pubitemid 351505896)
54. J. C. Simo and T. Hughes, Computational Inelasticity (Springer-Verlag, New York, 1998).
55. X. Teng, Numerical prediction of slant fracture with continuum damage mechanics, Engineering Fracture Mechanics 75 (2008) 2020-2041.
56. P. F. Thomason, Ductile Fracture of Metals (Pergamon Press, Oxford, 1990).
57. V. Tvergaard, Influence of voids on shear band instabilities under plane strain conditions, Int. J. Fracture. 17 (1981) 389-407. (Pubitemid 12441659)
58. V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metal. 32(1) (1984) 157-169. (Pubitemid 14509228)
59. W. von Lode, Versuche über den einfluß der mittleren hauptspannug auf die fließgrenze, Zeitschrift f̈ur angewandte mathematik und mechanik 5(2) (1925) 142-144.
60. G. Z. Voyiadjis and R. J. Dorgan, Framework using functional forms of hardening internal state variables in modeling elasto-plastic-damage behavior, Int. J. Plasticity 23(10-11) (2007) 1826-1859. (Pubitemid 47212648)
61. T. Wierzbicki, Y. Bao, Y. W. Lee and Y. Bai, Calibration and evaluation of seven fracture models, Int. J. Mech. Sci. 47(4-5) (2005) 719-743. (Pubitemid 40583519)
62. T. Wierzbicki and L. Xue, On the effect of the third invariant of the stress deviator on ductile fracture. Technical Report 136, Impact and Crashworthiness Lab, MIT, (2005).
63. L. Xue, Void shearing effect in ductile fracture of porus materials, in Besson, J. et al., editor, Local Approach to Fracture, Proc. the 9th Euro. Mech. Mater. Conf., pp. 483-488, Moret-sur-Loing, France (2006).
64. L. Xue, Damage accumulation and fracture initiation of uncracked ductile solids subjected to triaxial loading, Int. J. Solids Struct. 44 (2007a) 5163-5181. (Pubitemid 46498076)
65. L. Xue, Ductile fracture modeling-theory, experimental investigation and numerical verification, PhD thesis, Massachusetts Institute of Technology (2007b).
66. L. Xue, Constitutive modeling of void shearing effect in ductile fracture of porous materials, Eng. Frac. Mech. 75(11) (2008a) 3343-3366. (Pubitemid 351486834)
67. L. Xue, A unified expression for low cycle fatigue and extremely low cycle fatigue and its implication for monotonic loading, Int. J. Fatigue 30(10-11) (2008b) 1691-1698.
68. L. Xue and T. Wierzbicki, Ductile fracture initiation and propagation modeling using damage plasticity theory, Eng. Frac. Mech. 75(11) (2008) 3276-3293. (Pubitemid 351486838)
69. L. Xue, Stress based fracture envelope for damage plastic solids, Eng. Frac. Mech. 76(3) (2009) 419-438.
70. L. Xue and T. Wierzbicki, Numerical simulation of fracture mode transition in ductile plates, Int. J. Solids Struct. 46 (2009) 1423-1435.
71. Z. L. Zhang, C. Thaulow and J. Ødegård, A complete gurson model approach for ductile fracture, Eng. Frac. Mech. 67(2) (2000) 155-168.
72. K. S. Zhang, J. B. Bai and D. Fraņcois, Numerical analysis of the influence of the Lode parameter on void growth, Int. J. Solids Struct. 38 (2001) 5847-5856. (Pubitemid 32602517)
73. H. C. Huang and L. Xue, Prediction of slant ductile fracture using damage plasticity theory, Int. J. Pressure. Vessels and Piping 86 (2009) 319-328.